All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO714 and THO1414. Diameter: 44 mm (1 3/4in).
The Roughneck Ball Pein Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Ball Pein Hammer Fibreglass Shaft 1.13kg (40oz)
The Roughneck Gorilla V-Series Double-Ended Scutch Hammer accepts both scutch combs and chisels, making it ideal for stone and masonry dressing. Manufactured from drop-forged, hardened and tempered steel for extreme strength and durability. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Sledge Hammer has the following specifications: Weight: 2.7kg (6lb).Length: 780mm.
Faithfull general purpose sledge hammer for builders and contractors.Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection. Manufactured in accordance with BS876.Weight: 4530g (10lb)
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 680g (1 1/2lb)
This Stanley Curved Claw Hammer has a lightweight design with a long handle for improved performance and less user fatigue. The handle has a fibreglass core that adds strength and helps to reduce vibrations. The polished smooth face has a tempered rim to reduce incidences of chipping.1 x Stanley Curved Claw Hammer Fibreglass Shaft 570g (20oz)
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 830g (2lb).Diameter 32mm (1 1/4 in).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: A.Weight 425g.Diameter 25mm (1 in).
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.108: Size 0. Weight 60g (2oz).Diameter 25mm (1in).
Thor Replacement white super plastic split head faces are special shaped and manufactured from ultra-high molecular weight polythene which will not fracture, splinter or delaminate on use. The Ultra-high molecular weight Polythene when fitted into Malleable iron heads provide high impact, durability and high abrasive resistance. These faces can be used as an alternative to Rawhide.For use with size 3 Thor split head hammers .Face diameter 44m (1 3/4 in)
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: 4.Diameter 50mm (2 in)
Estwing E239 Roofers pick hammer is designed for the roofing trade. It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised head for starting nails accurately. The hammer is made from solid steel with a genuine leather grip. Made in the USA.Milled faceLeather gripWeight: 620g (1lb 6oz).
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 325g (11oz).Diameter 54mm (2 1/8 in) Black Head
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 454g (1 lb).
Roughneck Non Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors. These rubber mallets will not discolour or leave marks on work surfaces. Used as a general purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.The Roughneck 680g (24oz) rubber mallet has a medium hard rubber head, soft grip handle and a strong steel shaft, that is moulded together to make a one piece tool.
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 570g (1 1/4 lb).
