Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: A.Weight 425g.Diameter 25mm (1 in).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 4.Weight 2830g.Diameter 50mm (2 in).
Claw hammer with a drop forged, heat treated, round head. Faced for accurate striking, and a full claw for maximum pulling power. The 70% fibreglass handle is plastic coated for comfort. Weight: 570g (1.1/4lb).
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 570g (1 1/4lb)
Roughneck Gorilla V-Series Claw Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and is further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The magnetic nail holder makes for effortless starting, particularly in hard-to-reach areas, whilst the mini-claw allows for embedded nails to be removed with ease. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Claw Hammer 680g (24oz)
Estwing E3 Straight claw hammers with Estwing's world famous blue shock reduction nylon vinyl grip. The handle grip, made from liquid vinyl bonded onto the shaft during production offers the utmost in both comfort and durability, while reducing vibrations caused by impact.The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out.Made in the USA from high quality steel.Weight 450g (16oz)
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 3. Weigh : 225g (1/2 lb).Diamete: 44 mm (1 3/4 in).
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.8kg (4 lb)
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS30 Non-Rebound Hammer
Thor Replacement white super plastic split head faces are special shaped and manufactured from ultra-high molecular weight polythene which will not fracture, splinter or delaminate on use. The Ultra-high molecular weight Polythene when fitted into Malleable iron heads provide high impact, durability and high abrasive resistance. These faces can be used as an alternative to Rawhide.For use with size 4 Thor split head hammers .Face diameter 50m (2 in)
This Stanley Curved Claw Hammer has a lightweight design with a long handle for improved performance and less user fatigue. The handle has a fibreglass core that adds strength and helps to reduce vibrations. The polished smooth face has a tempered rim to reduce incidences of chipping.1 x Stanley Curved Claw Hammer Fibreglass Shaft 450g (16oz) ;
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 680g (1 1/2lb)
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 525g (1 lb 3oz).Diameter 64mm (2 1/2 in). Black Head
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 32mm (1 1/4 in).Weight 445g (1lb).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.One soft grey and one hard white face.Diameter 32mm (1 1/4 in).Weight 385g (1lb).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 25mm (1 in).Weight 250g (1/2lb).
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO412. Diameter: 38 mm (1 1/2in).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 830g (2lb).Diameter 32mm (1 1/4 in).
Thor Nylon hammers have a choice of plastic grip or wooden handles with Chrome plated Zinc heads with Nylon faces, these are fitted as standard, available in 6 different weights. Alternative faces, colour coded to distinguish hardness are also available. The faces are designed to wear and are replaceable by hand. Available in 6 sizes each with different weights, Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc. THO406 and THO408 are fitted with wooden handles while THO410, THO412, THO414 and THO416 have plastic handles.Weight 680g (1 1/2lb).Diameter 38mm (1 1/2 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 3 Thor split head hammers .Face diameter 44mm (1 3/4 in)
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 3.Diameter: 44mm (1 3/4 in).Weight: 1550g (3 1/4 lb).
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat treated for hardness. The hammers also each feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Mini Sledge Hammer has the following specifications: Weight: 1.4kg (3lb).Length: 345mm.
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 2. Weight 170g (6oz).Diameter 38 mm (1 1/2 in).
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO720 and THO2020. Diameter: 63 mm (2 1/2in).
The Wiha Electrician's Hammer easily removes nails and nail clamps or positions cables and dowels. Its U-shaped striking surface provides optimum access to tight spaces. The flat, straight claws on the hammer head enable users to remove nail clamps even from difficult-to-reach spots and pull nails quickly and easily from the wall. This hammer unites ergonomic handling, balanced weight distribution and the ability to remove fastening elements such as nail clamps.Fitted with an ergonomically designed, non-slip handle. Fits perfectly into the hand, ensuring a secure hold when striking. The base of the handle can be used to position cables and dowels, without causing any damage to the wall. Specifications: Head Weight: 300g.Hammer Head Height: 23.9mm.Overall Length: 283mm.
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 5. Weight 570g (1 1/4 lb).Diameter 63 mm (2 1/2 in).
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 5 Thor split head hammers. Face diameter: 70mm (2 3/4 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 1Weight 710g (1 1/2lb).Diameter 32mm (1 1/4 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 2 Thor split head hammers .Face diameter 38mm (1 1/2 in)
The curved claw head is made from forged, heat treated steel and the oval tubular steel shaft combines strength with a lightweight feel.The flock filled vinyl grips are impervious to heat, oil and most solvents.Weight 567g (1 1/4 lb)
The Roughneck Ball Pein Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Ball Pein Hammer Fibreglass Shaft 680g (24oz)
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 4.Diameter: 50mm (2 in).Weight: 2100g (4 1/2 lb).
The Thor A312 Aluminium hammers have a malleable iron head fitted with two cylindrical ductile aluminium faces (designed to wear and be replaced) and a wooden handle. Ideal for use where a heavy blow is required in a relatively small striking area. The malleable iron head and the aluminium faces combine to provide the weight for the blow while the faces prevent damage to most items being struck. Used as an alternative to copper as a general-purpose soft-faced hammer in engineering applications for assembly, repair and maintenance operations. Weight. 950gm (34oz).Diameter: 38 mm (1 1/2in).Size: 2.
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 1.Diameter: 32mm (1 1/4in).Weight: 690g (1 1/2lb).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 5.Diameter: 70 mm (2 3/4in).Weight: 3625g (7 1/2lb).
