This Faithfull 8 Pocket Chisel Roll is made from water-resistant, high-quality suede leather which is double stitched at stress points. Fitted with a long ribbon tie. Suitable for chisels and other small tools. NOTE: Tools NOT included.
The Faithfull Chisel Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection. NOTE: Tools NOT included.1 x Faithfull 12 Pocket Chisel Roll 32 x 68cm
The Faithfull Double Scaffold Spanner Holder, made to a high specification using quality heavy-duty hide. Made to last and provide dependable service. Two loops for scaffold spanners or socket bars. Fits most belts. Size: 150 x 100mm (6 x 4in).
The Kuny's HM213 Leather Heavy-Duty Hammer Holder is made from Top Grain leather. The cradle design eliminates hammer pivoting. Fits belt sizes up to 70mm (2.3/4in) wide.
The Kuny's AP-527X Heavy-Duty Leather Work Apron is made from heavy-duty suede leather. It has 12 pockets, including: four main nail and tool pockets, six smaller pockets (for pliers, nail sets, pencils, etc.), a centre pocket for tape measure, nails or other tools and a leather combination square holder. In addition, the apron features a hammer hook. Has double gussets which help to keep front pockets wide open for easy access. Its 52mm (2in) wide polyweb belt has a roller buckle. Fits waist sizes: 29 to 46in.
The Kuny's SW-1105 5 Pocket Phone & Tool Holder is made from polyester fabric and ballistic nylon. The mobile phone, tool and accessory holder you can HANG or STRAP or CLIP on work belts, web braces, trousers etc. Securely holds small tools and accessories like pliers, mini-flashlights etc. Versatile 3-way attachment feature.
The Kuny's Cordless Drill Holster made from a double layer of rugged lightweight fabric. Holds most brands of T-handle cordless drills and has multiple outer pockets and sleeves for complete drill bit organisation. Safety strap with quick-release buckle.
The DEWALT DWST1-75661 Full Leather Belt is fully adjustable to suit all waist sizes and the 2-pin belt buckle ensures the belt is tightly secured and can carry heavy loads.
The Bahco 4750-HDLB-1 Heavy-Duty Part Leather Belt has a durable, long lasting design with strong industrial stitching and rust proof fittings. Made of extra strong leather, woven material and riveted for additional strength. The belt is embossed with the Bahco logo.Fits waists 32-48in.
The Kuny's AP-622a Carpenter's apron is made from durable split grain leather with contrasting black stitching, rivets and hammer holders. It has carry handles to allow easy handling/storage and a 2in wide heavy nylon belt with double rivets at all stress points. - 5 Reversed nail pockets for easy access. - 2 Large and 3 Small. - Deep centre pocket for tape etc.- 2 Heavy Steel Hammer Holders. - 6 Utility pockets for pencils, markers etc.
The Kuny's EL-1503 Electrician's Pouch made from tough polyester fabric which can be attached to a belt via the belt loop or the heavy-duty snap clip on the back. The pouch has nine pockets - three internal pocket sleeves and six external pockets. With handy sling to carry electrical tape.
The Kuny's Journeyman Carpenter's Half Apron made from split grain leather. Large and small reversed nail pockets for easy access. Heavy steel hammer holder. Three smaller pockets for utility knife, pencils or markers. Rivet reinforced at all stress points.
The Kuny's AP661 Split Grain Water Repellent Tool Belt is made from heavy water repellent split grain leather. Five reversed nail pockets for easy access (two large and three small). Deep centre pockets for tapes or other tools. Two heavy steel hammer holders with six smaller pockets for pencils, utility knife, markers etc. Heavy-duty belt with roller buckle and double riveted at all stress points.
The Bahco 4750-HHO-2 Hammer Holder is made from durable 1680 denier polyester and will hold any claw hammer at a comfortable angle. It also features a lanyard attachment for safer at height working and an integrated belt loop. The holder is rustproof for a long working life.
The Kuny's SG-5021 Impact Driver Holster made from Polyester fabric and designed to suit 10.8V to 18V Impact Guns. It has adjustable straps and quick release buckle and a hook and loop backing to keep the security strap out of the way when in use.
The Stanley Tools Leather Tool Apron has multiple pockets and holders for quick access on the job. The middle pocket is ideal for holding pocket tapes and there is also a steel hammer loop. Made from durable leather with rivet reinforced stress points. The apron has a sturdy, adjustable belt and a durable metal buckle. With an easy to use roller buckle. The belt is perforated to suit all waist sizes from 83-133cm.
The Faithfull 10 Pocket Leather Tool Roll is manufactured from high-quality leather. Contains ten pockets of various sizes and is ideal for storing small tools such as chisels, auger bits, screwdrivers and spanners. It has a stud fastening system for ease of use. Note: Tools NOT included.
Kuny's Journeyman Carpenter's Apron made of full grain leather, with reinforced stress points. Heavy leather belt with roller buckle.5 Reversed nail pockets for easy access (2 large and 3 small).- Deep centre pocket for tape etc. - 2 Heavy steel hammer holders.- Extra pockets for pencils, markers etc.
The DEWALT DWST1-75662 Hammer Loop has a rustproof metal loop that fits most hammers. It is made from a strong durable polyester fabric, 1200 denier, with metal rivets for extra reinforcement.
The Stanley Tools Leather Nail & Hammer Pouch has multiple, easy access pockets and holders for quick access on the job. Fitted with a metal hammer loop that is a comfortable reach. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.
The DEWALT DWST1-75651 Tool Belt is an ergonomic padded belt with breathable mesh for maximum comfort when holding heavy loads. The belt is made from heavy-duty leather and a strong, durable polyester fabric, 1200 denier. The belt is fully adjustable to suit all waist sizes and the 2-pin belt buckle ensures the belt is tightly secured and can carry heavy loads. Also includes steel d-ring hangers for use with braces. It is a customisable tool belt and can be used with any combination of the DEWALT pouches or holsters.
The Faithfull Bit Roll is made from a hardwearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sizes of drill bits and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. NOTE: Tools NOT included.1 x Faithfull 9 Pocket Bit Roll 27 x 42cm.
This Stanley tool pouch is manufactured from tough 600 denier fabric and has a padded back for extra comfort. In addition, it has integrated metal hammer loop and multiple pockets and loops for maximum organisation.
The Stanley Tools Leather Belt is made from professional, high grade leather (suede) with a durable metal buckle. Easy to use roller buckle. The belt is perforated to suit all waist sizes 83-133cm.
The Stanley Tools Leather Double Nail Pocket Pouch is perfect for nails and small tools. With easy access pockets, the size and structure of pockets enable easy access. There is also a metal, quick access tape holder. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.Can be used with Stanley STA180119 Leather Belt
The Kuny's HM219 Leather Swing Hammer Holder is made from top grain leather and heavy-duty steel. The cradle design keeps the hammer secure whilst the swing feature keeps hammer vertical. Fits belt sizes up to 70mm (2.3/4in) wide.
The Stanley 12 Pocket Tool Roll is made from durable 600 denier fabric. Contains 12 pockets for various sizes of tools and ties for convenient and safe storage. Dimensions: 38.5 x 64cm
The Stanley Pocket Pouch is suitable for the secure storage of important items. Manufactured from 600 denier fabric and fully adjustable to different belt sizes.
The Stanley Tool Apron is made from hard-wearing, strong and durable 600 x 600 denier fabric. It has multiple pockets and loops to provide maximum organisation. The size and structure of these pockets allows easy access. The tool belt comes complete with a tape pocket and an integrated hammer loop to keep these tools at convenient reach. In addition, it has ergonomic back padding for safety and comfort. Dimensions: 60 x 25.5 x 7.5cm.
The Kuny's drywall Pouch with no hammer holder loop. Ideal for use when fitting plasterboard as there are no hard surfaces to cause damage. Made from durable split grain leather. Three pouches. (Large, Medium and Small) reversed for easy access. Rivet reinforced at all stress points. Fits any belt up to 76.2mm (3in) wide.
