The DEWALT DEWDT3733XJ ceramic diamond tile blade has a continuous rim design for fine finish in hard materials e.g. tiles and ceramics. The blade is for wet cutting only and can be used with DEWALT wet tile saws. The DEWALT DEWDT3733XJ has the following specifications:254mm Diameter25.4mm Bore Size8mm Segment Height1.6mm Segment Width
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grade steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 300mm.
The Metabo Multi Row Professional UP Wall Chaser Blade is ideal for electric installations, laying cables and empty pipes under plaster etc. Highly reduced workload thanks to the intelligent system of interlacing arrangement of segments, since cutting away the centre is not required. There is also a reduction of dirt and dust, since the material is removed cleanly and completely from the slot. Customised slots for individual lines Ø12mm, or for Ø20mm and Ø25mm empty pipes. Suitable for the Metabo MFE40 Wall Chaser. Specification: Diameter x Bore: 125 x 22.23mmMax. Cutting Width: 2 Rows 20mm, 3 Rows 30mmMax. Speed: 12,200/min.The Metabo 3 Row Professional UP Universal Wall Chaser Blade has the following specification: Size: 125 x 28.5 x 22.23mmSegment Dimensions: 28.5 x 7mmNumber of Segments: 30
The DEWALT Extreme Diamond Cutting Blade has a 3 x 12mm diamond segment with an aggressive cut pattern giving faster cuts and longer blade life. With an optimised wheel edge design for better debris removal. For cutting through concrete and masonry materials, wet or dry conditions. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw.This DEWALT Extreme Wet & Dry Use Diamond Blade has the following specification: Diameter: 125mmBore Size: 22.23mmSegment Height: 12mmSegment Thickness: 2.6mmMax. rpm: 12,250/min.
The Metabo Multi Row Professional UP Wall Chaser Blade is ideal for electric installations, laying cables and empty pipes under plaster etc. Highly reduced workload thanks to the intelligent system of interlacing arrangement of segments, since cutting away the centre is not required. There is also a reduction of dirt and dust, since the material is removed cleanly and completely from the slot. Customised slots for individual lines Ø12mm, or for Ø20mm and Ø25mm empty pipes. Suitable for the Metabo MFE40 Wall Chaser. Specification: Diameter x Bore: 125 x 22.23mmMax. Cutting Width: 2 Rows 20mm, 3 Rows 30mmMax. Speed: 12,200/min.The Metabo 2 Row Professional UP Universal Wall Chaser Blade has the following specification: Size: 125 x 18 x 22.23mmSegment Dimensions: 18 x 7mmNumber of Segments: 20
The DEWALT DT3714 Diamond Tile Blade with a continuous rim design for a fine finish in all tile materials. Suitable for manual wet and dry cutting, Specification: Disc Diameter: 110mmBore: 20mm
DEWALT DT20590 Diamond Multi Material Blade 75mm for cutting a wide range of materials including drywall, cement board, PVC/plastic, fibre glass, and metal. Specially design for use with the DEWALT DCS438E2T XR BL Cut Off Tool (DEWDCS438E2T).
The DEWALT Extreme Diamond Cutting Blade has a 3 x 12mm diamond segment with an aggressive cut pattern giving faster cuts and longer blade life. With an optimised wheel edge design for better debris removal. For cutting through concrete and masonry materials, wet or dry conditions. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw.This DEWALT Extreme Wet & Dry Use Diamond Blade has the following specification: Diameter: 230mmBore Size: 22.23mmSegment Height: 12mmSegment Thickness: 2.6mmMax. rpm: 6,600/min.
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 115mmBore Size: 22.2mmSegment Height: 10mm.
This Faithfull diamond blade is specially designed for mortar raking applications, with a 6.4mm thick by 8mm deep heavily impregnated diamond segment. It quickly removes horizontal joints in brickwork prior to repointing. Blade Diameter: 115mm.Bore Size: 22.2mm.Segment width: 6.4mm.Segment Height: 8mm.
The DEWALT Dry Diamond Blade for dry cutting general masonry materials, such as brick, building blocks, paving blocks concrete. Universal fit for ALL brands of angle grinders. For use with corded and cordless grinders. Specifications: Diameter x Bore: 115 x 22.23mm.Thickness: 2.1mm.Pack Size: 2.
The DEWALT DT20591 Diamond Tile Blade 76mm for dry and wet cutting in all types of tile and ceramics. Its fine diamond grit provides a precise chip free finish. Specially design for use with the DEWALT DCS438E2T XR BL Cut Off Tool (DEWDCS438E2T).
The DEWALT Extreme Metal Cut Off Saw Blade has an Extreme Diamond Edge made from metal cutting diamonds bonded to the wheel‘s surface using a proprietary technology. The disc is made from solid steel for reduced risk of breakage. The disc has no shelf life, unlike bonded abrasives this disc will not expire, as long as it is stored in proper conditions. For cutting a wide range of metals: steel, stainless steel, cast iron, rebar, aluminium and non-ferrous metals. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw. Specification: Diameter: 230mmThickness: 2.10mmBore Size: 22.23mmMax. rpm: 6,650/min.
This IRWIN Segmented Diamond Blade made for cutting concrete, brick, granite and marble. Fits all popular angle grinders.1 x IRWIN Segmented Diamond Blade 125 x 22.23mm.
This IRWIN Segmented Diamond Blade made for cutting concrete, brick, granite and marble. Fits all popular angle grinders.1 x IRWIN Segmented Diamond Blade 230 x 22.23mm.
This IRWIN Segmented Diamond Blade made for cutting concrete, brick, granite and marble. Fits all popular angle grinders.1 x IRWIN Segmented Diamond Blade 115 x 22.23mm.
This IRWIN Continuous Rim Diamond Blade made for cutting ceramic tiles. Fits all popular angle grinders.1 x IRWIN Continuous Rim Diamond Blade 125 x 22.23mm.
This IRWIN Continuous Rim Diamond Blade made for cutting ceramic tiles. Fits all popular angle grinders.1 x IRWIN Continuous Rim Diamond Blade 115 x 22.23mm.
The DEWALT ELITE SERIES™ Diamond Segmented Wheel made for cutting in concrete_ with rebar. Laser welded, drop segments _provide a stronger bond for up to 5X longer* life cutting hard materials.The carbide reinforced matrix increases diamond bond strength and _delivers high performance. A high-alloy steel core allows for _high quality straight deep cuts. *Vs. DEWALT HP Diamonds cutting C35.
