The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Dimensions: Body: 35 x 48mm. Shackle: 38mm x 16mm clearance. Keyed Alike.
ABUS 701 and 702 series lock Off hasps, all steel construction and corrosion protected. Hasp accepts up to 6 41, 72 or T84 colour coded padlocks (padlocks not included) Where to use: Often called safety lock offs, they are used in industry by maintenance fitters to isolate electrical switch gear or valves. Each fitter has his own colour coded padlock and the switch grear cannot be restarted until all the fitters are clear of the machinery.Specification Length: 128mmWidth: 45mmStaple bore: 9mmSwitch Size: 25mm (1in)
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Dimensions:Body: 38 x 44mm.Shackle: 38mm length x 20mm clearance.
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Stainless steel shackle
The Master Lock S1010 Lockout Compact Pouch combines and organises commonly used electrical and valve lockout devices. It has a single compartment lightweight pouch and is supplied with a hook and loop belt loop.
Master Lock Lockout Tags to be used with safety padlocks and devices to show other staff Lockout has been installed and is in position. Comes with 12 tags and ties.
Masterlock’s range of electrical Lockout hasps are practical, flexible and hard wearing and used when multiple numbers of workers are operating in the area. They can be used in a variety of locations for a broad range of lockout tasks. This non-conductive Lockout Nylon Hasp enables lock-out by multiple workers (up to 6 padlocks) to keep the equipment inoperative while repairs or adjustments are made.The nylon body and jaw are non-conductive, and the hasp provides dielectric protection. It is non-sparking and ideal for electrical applications. Max shackle diameter: 6.35mm. Dimensions: 41mm x 174mm.
These Master Lock Lockout Electrical Plug Covers surround the electrical plug and prevent accidental reconnection. Rotating design enables installation in confined spaces. Zenex™ construction withstands chemicals and extreme temperatures ranging from -57°C to +177°C DANGER - DO NOT REMOVE tag included *padlock not includedThis large Lockout Electrical Plug Cover is suitable for 240 to 550 volt electrical plugs.
Masterlock’s range of ‘READY TO GO’ Lock out kits are quick and practical solutions to give you the right range of lock out equipment to get the job done straightaway! Each kit has the right mix of products for specific uses. The Master Lock Valve & Electrical Lockout Kit is supplied in a practical toolbox for easy transportation. The toolbox is rugged, strong with a large storage capacity. Can be locked with a padlock (shackles up to 6mm). Contains the following: 6 x S31KARED Padlocks3 x S806 Adjustable Lockout Cables2 x 420 Lockout Steel Hasps (6 Padlocks Max)1 x 480 Lockout Gate Valve 25-76mm1 x 481 Lockout Gate Valve 50-127mm1 x 482 Lockout Gate Valve 101-165mm1 x S3068MLP Ball/Butterfly Valve Lockout.6 x 2390 Lockout Mini Circuit Breakers Standard Toggle2 x S2393 Universal Mini Circuit Breakers
This Masterlock 1830mm adjustable lockout cable is ideal for simultaneous lockout of multiple valves and circuit breakers. The Zenex™ composite body can withstand extreme temperatures (-57 ° C to +177 ° C), chemicals and is UV stable. The device can be locked using up to four padlocks and the 4mm vinyl covered steel cable can be adjusted when locked. Includes ‘DANGER – DO NOT OPERATE’ label.
The Master Lock S2394 Universal Mini Circuit Breaker Lockout Device locks virtually all miniature ISO/DIN pin-out circuit breakers throughout the world. The patented device features a thumb turn dial screw for easy attachment, no tools required. Device attaches to circuit breaker and makes dial inaccessible in the locked position to prevent removal. Padlock can be applied horizontally or vertically and design allows device to be mounted side-by-side on adjacent breakers. Device works with all American Lock® and Master Lock® safety padlocks and lockout hasps (does not include ALO80 or ALO802).
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).
This Masterlock Mini Circuit Breaker lockout device is placed on the toggle of the power supply, locking it out whilst works are carried out. Fast and easy to use. No tools required. Suitable for standard toggles with openings less than 11mm.
Master Lock Grip Tight™ circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel.Master Lock Grip Tight™ circuit breaker lockouts not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel. The Lockout Griptight Set comprisess: MLK491B, suitable for wide and tall breaker toggles. MLK493B, suitable for standard breaker toggles.
These Master Lock Lockout Electrical Plug Covers surround the electrical plug and prevent accidental reconnection. Rotating design enables installation in confined spaces. Zenex™ construction withstands chemicals and extreme temperatures ranging from -57°C to +177°C DANGER - DO NOT REMOVE tag included *padlock not includedThis small Lockout Electrical Plug Cover is suitable for 120 to 240 volt electrical plugs.
The ABUS Standard Cable is a universal lockout device for locking out different energy sources during maintenance. It holds up to 6 padlocks and has an isolated, exchangeable metal cable that comes in different lengths. Locking Points: 6.Shackle Diameter: 7mm.Cable Diameter: 4.1mm.Length: 128mm.Width: 61mm.Depth: 16mm.ABUS C556 Standard Cable Lockout 2m
Masterlock’s range of electrical Lock out hasps are practical, flexible and hard wearing and used when multiple numbers of workers are operating in the area. They can be used in a variety of locations for a broad range of lockout tasks. The Masterlock Zenex™ body Two Padlock Lockout Hasp has a 4mm Shackle and enables lock-out by up to 2 padlocks to keep the equipment inoperative while repairs or adjustments are made. The Zenex™ composite withstands extreme temperatures and chemicals and is UV-stable. Ideal for electrical circuit breakers. Maximum shackle diameter: 6mm.
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Dimensions:Body: 38 x 44mm.Plastic Shackle: 38mm x 20mm clearance.
The Master Lock S601 Group Lockout Box is made from stainless steel, to withstand the toughest environments. It includes 19 lockout holes, including one on the front latch for the operations lock. The box includes a removable cup that creates a clear, impact-resistant window on the front, allowing participants to see keys are secured inside the box during a group lockout. It also features a side window, offering visibility to unused locks. The stackable design facilitates storage and simplifies transporting multiple boxes.
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 25-75mm (1-3 in).
This Masterlock 5mm x 11mm Lockout Pin-in External Access Circuit Breaker is placed on the toggle of the breaker.It is used to interrupt power supply at the source.Fast and easy to use. No tools required. Suitable for use on standard toggles.
Masterlock’s range of electrical Lockout hasps are practical, flexible and hard wearing and used when multiple numbers of workers are operating in the area. They can be used in a variety of locations for a broad range of lockout tasks. This Labelled Snap-on Lockout/Tagout Hasp enables lock-out by multiple workers (up to 5 padlocks) to keep the equipment inoperative while repairs or adjustments are made. It is made from anodised aluminium and stainless steel and has a spring-loaded jaw. Includes label for easy identification.
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 150-165mm (6-6 1/2 in).
Master Lock’s range of ‘READY TO GO’ Lock out kits are quick and practical solutions to give you the right range of lock out equipment to get the job done straightaway! Each kit has the right mix of products for specific uses. The Master Lock General Maintaince Lockout / Tagout Kit has been designed with a maintenance engineers requirements in mind. The kit includes universal lockouts for electrical and valve isolation. It comes with a wearable pouch, which makes it practical and portable. The pouch combines and organises the electrical lockout devices and has a single compartment with a hook and loop belt loop. Contains the following: 2 x S32KARED Zenex™ Keyed Alike Padlocks1 x 2390 Lockout Mini Circuit Breaker Standard Toggles1 x 2391 Lockout Mini Circuit Breaker Wide Toggles1 x 2392 Lockout Pin-in External Access Circuit Breaker1 x 2393 Universal Mini Circuit Breaker1 x 491B Lockout Circuit Breaker, Wide/Tall Toggles4 x 493B Lockout Circuit Breaker, Standard Toggles1 x S806 Adjustable Lockout Cable1 x 428 Lockout Nylon Hasp - Non Conductive2 x 'Do Not Operate' Tags
The ABUS 752 Aluminium Lockout Hasp made from Aluminium, that is lightweight and corrosion resistant. It is used to isolate electrical switch gear and valves during maintenance. The hasp will hold up to 6 padlocks from the following ABUS ranges: 41 series, 72 series or T84 series. Fits all shackles up to 9mm. Specification Width: 50mm.Height: 124mm.
ABUS 702 Series lock off hasps, all steel construction and corrosion protected. Hasp accepts up to 6 x 41,72 or T84 series colour coded padlocks (padlocks not included). Often called safety lock offs they are used in industry by mantenance fitters to isolate electrical switch gear or valves.Specification Length: 128mmWidth: 60mmStaple bore: 9mmSwitch Size: 38mm (1.1/2in)
Master Lock Grip Tight™ circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel.Master Lock Grip Tight™ circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel. Suitable for standard breaker toggles. Secure and simple mounting for solid lock-out.
This Masterlock Mini Circuit Breaker lockout device is placed on the toggle of the power supply, locking it out whilst works are carried out. Fast and easy to use. No tools required. Suitable for use with wide toggles with openings more than 11mm.
This Masterlock Universal Ball Valve Lockout fits into virtually all manual, quarter-turn ball valve handles to protect against accidental valve opening. It attaches to handle to prevent movement. The lockout is suitable for confined spaces and insulated pipes. Its ergonomic shape optimises tightening on the valve. It has an Aluminium and Steel body, and a Steel pin which fits behind the valve stopper tab. Adjustable jaws hold the valve in position. The Lockout's constrction withstands corrosive environments and extreme conditions, and is heat resistant up to 538°C.
