The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit.Single pack. Size: 13.0 x 151mm.
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length: 400mm.Size.8 mm x 400 mm.
These Faithfull high-performance, tungsten carbide tipped drill bits fit into SDS Plus chucks which provide a particularly secure, non-slip grip, that transmits maximum power for rotary percussion drilling, mainly into concrete. The SDS Plus bits ensure maximum power transmission due to their unique fluted shaft. This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank. The SDS Plus system also enables faster changing of drills using a quick-release keyless chuck.The drill bits are suitable for use in bricks, blocks, concrete containing aggregates, marble, hard stone and other hard masonry materials.The Faithfull FAISDS22410 SDS Drill has a heavy-duty tungsten carbide tip with the following dimensions:Diameter: 22mmWorking Length: 350mmOverall Length: 410mm
SANDFLEX® bi-metal holesaw set containing popular sizes for the engineering, water, sanitation and electrical installation industries. Holesaws: 1 of each of 16mm (5/8in), 19mm (3/4in), 22mm (7/8in), 29mm (1.1/8in), 35mm (1.3/8in), 44mm (1.3/4in), 52mm (2.1/16in), 57mm (2.1/4in) and 64mm (2.1/2in). Arbors: 3834-ARBR-1130 - for holesaws 14-30mm, 3834-ARBR-11152 - for holesaws 32-210 mm.Also includes a pilot drill, hexagon key and chip brush.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit. Size 3.0 x 61mm.
The Irwin Masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit 7 Piece Set. Contains the following sizes: 4.0, 5.0, 6.0,7.0, 8.0, 10.0 and 12.0mm.
The Dormer Imperial A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Suitable for both hand and machine use. Made to DIN 338RN/BS328/ISO 235 standards.Tip diameter: 7/32in. Working length: 57mm.Overall length: 93mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 4.0 x 75mm.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 6.0mm.Total length: 100mm.Working Length: 60mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11.00mm.Working length: 94mm.Overall length: 142mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 2.5 x 57mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 25/64in.Working length: 87mm.Overall length: 133mm.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 6.0mm.Total length: 160mm.Working Length: 115mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 5.0 x 86mm.
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.The Irwin IRW10507912 glass & tile drill bit 5 piece set includes the following pieces:4, 5, 6, 8 and 10mm
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 3.0mm.Working length: 33mm. Overall length: 61mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 17/64in.Working length: 69mm.Overall length: 109mm.
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502742 Auger bit - long series has the following dimensions:Drillbit diameter: 8.0mmTotal length: 400mmWorking Length: 323mm
The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP300LS Pre Pack HSS Jobber Drills Long Series 3.0mm have the following specifications:Diameter: 3.0mm. Overall Length: 100mm. Pack quantity: 2.
Starrett BI Metal Cordless Smooth Cutting Hole Saws (CSC Hole Saws) are constructed of hardened heat and abrasion resisting high speed steel teeth with a tough alloy body and cap, giving exceptional strength, durability and shatter resistance. Designed for use with battery operated power tools, our CSC Hole Saws will cut twice as many holes as the equivalent standard hole saw per battery charge. Advantages:The perfect tool for on site work with battery operated power tools.Ideal for cutting stainless, tool and mild steel sheeting plus plasterboard, wood and thin plasticsComplete assembly - there is no requirement to purchase a separate arbor and pilot drill.Constant pitch teeth provide exceptionally smooth cuts. Pitch 8 teeth per 25mm/inch.Safety stop at the base of the hole saw prevents drilling beyond maximum cutting depth.Size 20mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 6 mm Length 60 mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 6 mm x 400 mm.
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.
Starrett Tungsten Carbide Tipped Fast Cut Multi Purpose Holesaws are the perfect tool for users from construction and installation engineers to the diy enthusiast. Offering very fast cutting times, and outstanding life,these MPH saws will power through wood, MDF, plastics and ceramic wall tiles. Advantages: Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut, with minimal heat build up. Cutting depth 54 mm (2 1/8in), allowing use for cutting through strapping and joists. Suitable for use in mains and battery powered tools. Multiple uses - cutting wood, mdf, plastics, ceramic wall tiles and building bricks.The increased cutting depth allows for cutting through strapping and joists. Size: 40mm
