Blades for replaceable blade planes are produced from fine rolled steel, heat treated and ground to a razor sharp edge ready for use. 3 types are available: STA012376 - Convex, for general purpose work. STA012378 - Straight, for rebating or narrow work. STA012379 - Special, with a second bevel. This makes it ideal for plastic laminates.The straight one for rebating or narrow edges.Suitable for RB10 replaceable blade plane. 112100.Card of 5.
The Stanley Surform® Shaver Tool, ideal for stripping paint and smoothing down filler or plaster in awkward places. It has a lightweight plastic moulded body and is a compact and effective tool with a curved 62mm (2.1/2in) blade for increased stock removal. The blade can be changed without the use of additional tools. The shaver tool also has a side cutting edge, click action blade replacement and works on the pull stroke. Overall Length: 185mm (7in).
The Stanley Moulded Body Surform® Plane for use on all types of wood, aluminium, copper, plastic and laminates. It has a lightweight plastic moulded body with a thumb screw for quick blade release. Fitted with a standard cut 250mm (10in) blade. The blade can be changed without the use of additional tools. Overall Length: 270mm (10.1/2in).
These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.Contains: 4 x 6 mm dowel points.
These Faithfull woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Straight chisels, such as this, are used for smooth out cuts. The skew edge style is ground at a 23 degree angle and is useful for carving in tight corners. Please Note: Woodcarving chisels will require final sharpening prior to their first use.The FAIWCARV5 Woodcarving Chisel has the following specifications: Type: Straight Chisel. Blade width: 6.3 mm (1/4 inch). Handle: Hardwood.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 16mm (5/8in).
Estwing's Pro-Claw Moulding Puller is made of fine tool steel, drop forged and tempered for extra durability. Its precision thin blade is perfect for removing moulding without damaging the wall. The slot in the blade is designed for removing small nails and brads. The other end has a popular Japanese nail puller with precise and sharp claws for removing imbedded nails or headless nails with ease and minimal damage. 1 x Estwing EMP250G Pro-Claw Moulding Puller 250mm (10in).
The Faithfull set of two spokeshaves, 1 concave and 1 convex, made with malleable iron bodies. A concave spokeshave is ideal for shaping spindles, oars, chair and table legs. A convex spokeshave is used for recessed work. Cutter Width: 50mm. Length: 240mm.
This single pinion hand drill has an aluminium gear wheel.It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish,and is fitted with comfortable plastic handles.
Hultafors EDC Chisel 25mm and Craftsmen’s knife HVK form the perfect combination, in an easily accessible double holster, made from impact-resistant PP plastic, joined by rivets and hardwearing leather. Japanese steel blades, rust protected by Electrophoretic deposition (EPD). Fitted with heavy-duty handles designed to withstand repeated hammer blows. Specifications: Chisel: 25mm, Length: 232mm.Knife: Length: 208mm.
This Faithfull bench hook is manufactured from solid beech with screwed end hook blocks for extra strength. It will support timber safely on the work bench while sawing across the grain, helping to make sawing more accurate and safe. The bench hook has a reversible design that permits both left and right handed working. Size: 250 x 130mm (10 x 5in).
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.Siz1 X Marples M444 Series Blue Chip Bevel Edge Chisel 38mm (1 1/2in).
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 3mm (1/8in).
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.Size: 18mm.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC16 Scandinavian Butt Chisel. Blade: 16mm.Overall Length: 232mm.
The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 300mm (12in).
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length. 10.1/4in.Cutter Width. 2.3/8in.
These Faithfull Woodcarving Chisels have wooden handles, deep seated tangs, steel ferrules and fully polished blades. Straight chisels, such as this, are used for smooth out cuts. The skew edge style is ground at a 23 degree angle and is useful for carving in tight corners. Please Note: Woodcarving Chisels will require final sharpening prior to their first use.The FAIWCARV5 Woodcarving Chisel has the following specifications:Type: Straight Chisel.Blade Width: 6.3 mm (1/4 inch).Handle: 100% FSC Hardwood.
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.Set of 3 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)
The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 38mm.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mmSet of 3 Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. Sizes included: 12, 19, & 25mm (1/2, 3/4, and 1in). Sharpening tools include : honing guide, sharpening stone and honing oil. Supplied in handy carry case.
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 22mm (7/8in)
