These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This 4 piece Wood Chisel set contains the following sizes: 6mm, 13mm, 19mm and 25mm.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 38mm (1.1/2in).
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 19mm (3/4 inch).
The Stanley Dynagrip Chisels have steel striking caps which can be used with a steel hammer for increased force at the point of contact. They also have a longer, soft-grip handle for improved grip and control.Manufactured from forged high carbon steel for strength and durability and pre-sharpened, their blades are ready for immediate use.This 5 piece set plus accessories comprises:5 x Dynagrip Chisels: 6, 12, 18, 25 and 32mm.1 x Oil stone1 x Honing Guide.
The Faithfull FAIDOWKIT10 Dowel Kit contains the following: 1 x brad point drill bit1 x drill stop collar.2 x dowel centre points.1 x hex key.10 x 10 mm fluted dowel pegs.
The Faithfull Dowel Drill stops clamp on to drill bits enabling a hole of the correct depth to be made. Pack of 3 sizes of drill stops - 6, 8, and 10 mm. 2.5mm hex key is required to fit the drill stops (not included).
These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.The FAIDOWCENT10 Centre Points have the following specifications: Size: 10mm. Pack quanitity: 4.
The Faithfull Carpenters Tool Kit has been specially commissioned to provide the essentials you need for working with wood. All the tools are made to the highest quality from the finest hardwood, brass and steel. The set includes: Traditional No.4 Smoothing Plane60.1/2 Block Plane230mm Try Square230mm Sliding BevelMortice and Marking Gauge They all come with the confidence of a 5-year guarantee. This is a super gift for the professional, enthusiast or apprentice. Presented in a hinged wooden case.
The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily re-sharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mm
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mmSet of 3 Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle Sizes included: 12, 19, and 25mm (1/2, 3/4 & 1 in).
This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x 60.1/2 Block Plane with plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.
These Faithfull woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. V-Straight parting chisels, such as this one, are used mainly to cut 'V' grooves, outlining letterwork and corner finishing. Please Note: Woodcarving chisels will require final sharpening prior to their first use.The FAIWCARV7 Woodcarving Chisel has the following specifications: Type: V Straight Part Chisel. Blade width: 12.7mm (1/2in).Handle: Hardwood.
The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is supplied loose, unboxed.
The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.
The Faithfull planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. The 60.1/2 block plane with a 35mm cutter width, set at a low angle of 13 1/2º making it particularly effective on end grain and plastic laminates. The 9.1/2 block plane with a 42mm cutter width, set at an angle of 21º. Ideal for end grain and general purpose finishing. The Faithfull FAIPLANEBPS 60.1/2 and 9.1/2 block plane set is presented in a hinged wooden box.
The Faithfull 'Jack' planes have a long base and are used for the initial preparation of rough timber. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case. Cutter width: 50mm (2in) Overall length: 355mm (14in)
The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.Presented in a hinged wooden storage box.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 16mm (5/8in)
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.This Faithfull No.60.1/2 Block Plane is supplied loose, unboxed.
The Faithfull No.7 Jointer plane is designed for stock removal and truing long edges or levelling wide boards. The plane features a precision ground base and sides with a traditional hardwood handle and knob for comfort and high quality brass fittings precision machined for accurate adjustment. The plane is suitable for use on both hard and soft woods. Cutter Width: 60mm (2.3/8in).Overall Length: 560mm (22in).
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW672P fluted wood dowels have the following specifications: Pack quantity: 72. Size: 30 x 6mm.
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mm1 x Marples MS500 Series All-Purpose Chisel with ProTouch™ Handle 13mm (1/2in)
The IRWIN Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle. These chisels have a large metal striking cap to withstand hammer impacts, prolong the life of the handle and prevent mushrooming. ProTouch™ handles are designed to provide an extra comfort grip and also reduce vibrations and hand fatigue. One-piece blade forging gives added strength and durability. Made from special tool steel which ensures a much sharper cutting edge for quicker and easier operation. A special hardening process gives the blade a longer lasting edge - less time spent re-sharpening. The blade is hardened to the last inch, giving more working chisel for your money. Every chisel is honed and sharpened ready for use out of the packet - to save you time and effort. Option to purchase a single chisel or in the following sets: MARS500S3: Set of 3: 12, 19 & 25mmMARS500S3SS: Set of 3: 12, 19 & 25mm plus Sharpening SetMARS500S5W: Set of 5: 6, 10, 12, 19, & 25mmMARS500S6: Set of 6: 6, 10, 12, 19, 25, & 32mmMAR10507958: Set of 6 + 2 Free: 6, 10, 12, 19, 25, 32, 38 & 50mmThe MAR10507958 Marples MS500 Series All-Purpose Chisels with ProTouch™ Handle Set of 6 is supplied in a wooden box comprising 1 of each of the following sizes: 6mm (1/4in), 10mm (3/8in), 12mm (1/2in), 19mm (3/4in), 25mm (1in) and 32mm (1.1/4in). PLUS 2 free chisels included: 38mm (1.1/2in) and 50mm (2in).
The Faithfull No.4 Smoothing Plane is designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm.This Faithfull No.4 Smoothing Plane is presented in a hinged, wooden storage box.
The Faithfull Block Plane has the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.The Faithfull 60.1/2 Block plane with the plane iron set at 13.5°. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Overall Length: 160mm.Cutter Width: 35mm.
The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter width: 60mm (2.3/8in).Overall length: 457mm (18in).
