The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.The Irwin IRW10507912 glass & tile drill bit 5 piece set includes the following pieces:4, 5, 6, 8 and 10mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 6 mm Length 60 mm
Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance. Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.The Boa 340025 is a 25mm Diamond tip drill bit
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102799 Hard Tile Drillbit has the following specifications:Diameter: 32mm.
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501914 Granite drill bit has the following dimensions:Drillbit diameter: 14.0mmTotal length: 160mmWorking Length: 100mm
The Faithfull FAIDCKIT7 7 Piece Diamond Core Drill Kit for cutting clean holes in brick and concrete blocks. They are ideal for plumbing, electrical, engineering installation and general building tasks. All cores are 1⁄2 inch. BSP threaded with 8mm turbo segments. Set contains:3 x Diamond Cores with 8mm Turbo Segments: 38mm, 52mm, and 117mm.1 x SDS Plus Extension Adaptor 10mm x 200mm.1 x Hex Extension Adaptor 12mm x 200mm.1 x A-Taper Pilot Drill 10mm x 200mm.1 x Extractor Drift Key.1 x Carry Case. ROTARY USE ONLY – Must not be used on Percussion/Hammer mode. DO NOT USE DIAMOND CORES LARGER THAN 78mm IN DIAMETER WITH SDS PLUS DRILLS AS THIS MAY RESULT IN DAMAGE TO THE POWER TOOL OR SDS ADAPTOR. Diamond Cores give the best results when used with a purpose built core drilling machine.
The Vitrex Dry Cut / Wax Filled Drills have a diamond grit edged bit to provide a faster, superior cut and give them an increased life. The bits are wax filled so there is no need for water. Ideal for drilling in all tile types, including porcelain.Vitrex Dry Cut / Wax Filled Drill 10mm
Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance. Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.The Boa 34005 is a 5mm Diamond tip drill bit
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102800 Hard Tile Drillbit has the following specifications:Diameter: 38mm.
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102798 Hard Tile Drillbit has the following specifications:Diameter: 25mm.
Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance. Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.The Boa 34008 is a 8mm Diamond tip drill bit
The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The IRW10507893 Diamond Drill Bit is 6mm in diameter.
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102797 Hard Tile Drillbit has the following specifications:Diameter: 22mm.
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 4mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501912 Granite drill bit has the following dimensions:Drillbit diameter: 10.0mmTotal length: 200mmWorking Length: 130mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501902 Granite drill bit has the following dimensions:Drillbit diameter: 6.0mmTotal length: 160mmWorking Length: 115mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.Size 3.0 x 70mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501903 Granite drill bit has the following dimensions:Drillbit diameter: 6.5mmTotal length: 105mmWorking Length: 60mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501905 Granite drill bit has the following dimensions:Drillbit diameter: 7.0mmTotal length: 110mmWorking Length: 65mm
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.Size 10mm
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.The Irwin IRW10501908 Granite drill bit has the following dimensions:Drillbit diameter: 8.0mmTotal length: 200mmWorking Length: 130mm
Boa Quick Change Diamond Tip Drill Bits ith a vacuum brazed diamond tip, Boa Diamond Drills are developed for hard materials. This product has been 10 years in development with a welded diamond tip for greater strength and endurance. Manufactured in the UK, these drills will perform beyond expectation, and with the addition of the Boa CCV (Cool Clear Vision) guide and water cooling device this product stands out from the competition.The Boa 340010 is a 10mm Diamond tip drill bit
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102791 Hard Tile Drillbit has the following specifications:Diameter: 6mm.
The Irwin Granite drill bit range has been designed for impact / percussion drilling in very hard materials such as granite, concrete and natural stone. They can drill 40% more holes than conventional masonry drill bits due to an extra hard, thicker and more robust carbide tip. The rounded cutting edges mean higher durability resulting in 50% more accurately sized holes per drill bit.Size 5.0 x 90mm
