A selection of wire wheels of assorted sizes and shapes, with 1/4 inch shanks to suit most mains and cordless drills.They are ideal for preparing metal surfaces prior to painting, rust removal, decarbonising motor engines and cleaning of garden and contractors tools.20 pieces.10 x 60mm Cup Brushes.10 x 100mm Circular Brushes.Although the wheels are supplied in a bulk of 20, your Faithfull stockist may be able to supply any individual wheel to the purchasers choice.Not suitable for use in die grinders or high speed air tools.
The DEWALT DT90392-QZ Bit Holder Sweetie Jar contains 100 x DT7500 Magnetic Bit Holders. Each bit holder is made from high-quality materials with a hardened core for extra strength and durability. With a strong magnetic tip for secure grip. Suitable for use with all standard screwdriver bits. Overall Length: 60mm
This Gorilla Super Glue Micro Precise Clip Strip comes with 6 x Gorilla Super Glue Micro Precise 5g. Gorilla Super Glue Micro Precise keeps holding strong, even when the bond takes a hit. Just hold in place for 10-45 seconds whilst the formula sets, no clamping necessary. It has an anti clog cap that provides precise application exactly where you need it. Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more.
WD-40® is an all-purpose liquid for displacing moisture, corrosion control, lubrication, cleaning and penetration. It has the ability to penetrate the minute grain boundaries on all metals. Although not essentially a lubricant, WD-40® is regularly used to lubricate all light machinery and electrical equipment. Protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture and lubricates just about anything. It is also great when it comes to cleaning grease, grime and other marks from most surfaces. WD-40® is a mixture of chemical concentrates suspended in a high-grade petroleum distillate. It will not affect fabrics, rubbers or plastics. Its working temperature is between -100°F and +500°F. Thoroughly recommended to clean, preserve and protect all tools. Supplied as a Flexible Straw Aerosol, it provides access to the most difficult spots that require a precise application. The flexible 18cm straw can be folded and maintain its shape whilst in use.
The DEWALT Pozi Bits have a hardened core for extra strength and durability. The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits. This display contains 21 Tic Tac boxes, each containing 25 x PZ2 25mm bits.
The DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screw driver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws.
The DEWALT 150cm Boot Laces are a suitable replacement for use with all DEWALT safety footwear. Supplied as a dispenser of 60 pairs of laces. Also available singly
Counter Display containing 10 x KPX6801200 End Cutters ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications. The 68 01 series cutting pliers offer a long service life , with cutting edges hardened to approximately 61 HRC, these pliers will help make light work of annealed tie wire used to reinforce rods or braided reinforced concrete mesh. The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort. Size: 200 mm (8in)
DEWALT DT70588T PZ2 25mm Impact Bit Display Contains 21 x DT70588T PZ2 25mm Impact Bits Pack of 25 DEWALT Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Includes an impact rated bit holder.
The Knipex Alligator° Waterpump Pliers Counter Display is supplied with 10 x Knipex Alligator® Water Pump Pliers PVC Grip 250mm. The display is made from high quality cardboard with a high gloss print, that offers minimum space. The Knipex 88 01 Series Alligator® Water Pump Pliers with dipped PVC handles and a box joint design prevents slipping from the workpiece. The gripping surfaces have special hardened teeth to approx. 61 HRC offering high wear resistance and stable gripping. They are made from chrome vanadium electric steel, that has been oil-hardened. They offer more output and comfort compared to conventional water pump pliers of the same length and have a 9-notch adjustment positioning for 30 % more gripping capacity. The slim design of the head and joint area provide good access to the work piece and self-locking on pipes and nuts means no slipping on the work piece and low hand force required. Alligator® water pump pliers have a robust construction, insensitive to dirt. Particularly suitable for outdoor work. The guard prevents operators fingers being pinched.
Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in a gravity dispenser box. Ideal for display on a trade counter or can be hung on a peg.
12 x 5 metre tape measures in a display box. Rubberised case for comfortable grip. Easy Read metric and imperial measurements. New Stop Easy to lock and release.
For the control of common black ants in and around the home. Nippon Ant Killer Liquid is a sugary bait formulation designed to attract worker ants to take the bait and feed it to the whole colony. This product is particularly useful when the nest site is unknown or inaccessible. Apply at the first signs of ant activity (normally early spring) How to use: Remove readily available foodstuffs. Pierce the sachet and apply a few drops of liquid, preferably in late evening, to a non-absorbent surface by the ant run. Change the bait daily until ant activity ceases. Do not disturb feeding ants as it is essential that feeder ants take the bait back to the nest to the rest of the colony. An effective dose is usually built-up within the colony over 7-10 days depending on the size of the ant colony and the frequency of ant feeding. Nippon liquid destroys complete ant colonies without trace. Contains Spinosad. Always read the label: use pesticides safely. Counter display of 30 packs (25g per pack).
The Footprint No.45 Bolsters and Chisels merchandiser stand is an essential part of any hand tool retailer. The stand contains the following products: 6 x Brick Bolsters 75mm (3in)6 x Brick Bolsters 100mm (4in)3 x Brick Bolsters 114mm (4.1/2in) 6 x Flooring/Electrician's Chisels 6 x Plugging Chisels 3 x Cold Chisels 177 x 19mm (7 x 3/4in)3 x Cold Chisels 200 x 19mm (8 x 3/4in)3 x Cold Chisels 228 x 22mm (9 x 7/8in)3 x Cold Chisels 250 x 25mm (10 x 1in) 3 x Scutch Chisels 25mm (1in)3 x Scutch Chisels 38mm (1.1/2in)
A compact and easy-to-install display that combines Dry-Marker and Refill to Dry-Marker. Holds 20 pieces of Dry-Marker and 10 Refill, 5 of each combination; graphite or graphite and chalk.
The Faithfulll Carpenters Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked out with these carpenters pencils. The pencil has flat sides to prevent it from rolling away. There are three colour coded grades of hardness to cater for different surfaces. Supplied in a tube of twelve pencils with a specially shaped pencil sharpener. Grade: Medium, Colour: Red For general carpentry use.Display dispenser containing 12 tubes of 12 pencils plus a sharpener.
The Komelon Snap Off Knife Counter Display Unit contains: 6 x 9mm Snap Off Knives with Free Blades 6 x 18mm Snap Off Knives with Free Blades 6 x 25mm Snap Off Knives with Free Blades
Display of 21 Extreme PZ2 x 25mm Tic Tac Boxes with 21 Magnetic Holders The DEWALT Extreme Impact Torsion Pozi Bits have a 15° torsion zone that allows the screwdriver bit to flex rather than break and the full fit head prevents rounding of the screw head preventing 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws. Supplied with a magnetic bit holder and a modular case.
The Vaughan B215EC SuperBar Display is supplied with 10 x Standard B215 SuperBars. The Vaughan SuperBar with 'Shepherd's Crook' rocker head for maximum prying power. Forged from spring tempered steel with 3 bevelled nail slots and polished, sharp blades for easy insertion. Perfect for prying mouldings, scraping and pulling nails. Made in the USA.
The Faithfull Carpenter's Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked out with these carpenter's pencils. The pencil has flat sides to prevent it from rolling away. There are 3 colour coded grades of hardness to cater for different surfaces. Supplied as a counter display unit of 80 loose pencils.1 x Faithfull Carpenter's Pencils Counter Display Unit containing 80 loose Red / Medium Carpenter's Pencils
The DEWALT Impact Torsion Phillips Bits have a 15° torsion zone that allows the screw driver bit to flex rather than break, and the full fit head prevents rounding of the screw head and prevents 'cam out' (bit head slipping out of the screw head due to the turning force). The magnetic screw lock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws.
The Knipex Cobra® Quickset Waterpump Pliers Counter Display is supplied with 10 x Knipex Cobra® Quickset Waterpump Pliers PVC Grips 250mm. The display is made from high quality cardboard with a high gloss print, that offers minimum space. The Knipex 87 Series Cobra® Quickset Hightech Waterpump Pliers are made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. They combine the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas. The adjustment directly on the workpiece is possible by simply sliding the pliers handle. They offer reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. To re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again.
The DEWALT Torsion Pozi Bits have a hardened core for extra strength and durability. They have a flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits. This display contains 21 Tic Tac boxes, each containing 25 x PH2 25mm bits.
The Bahco 317 Hacksaw Frame is compact and easy-to-use hacksaw for all round cutting. The slim design improves access into confined spaces and makes storage easy. The special comfort grip at the front provides good support for the guiding hand and ensures a much better performance. Alternative blade mounting for flush cutting.Blade length: 300mm (12in). This display box contains 10 x 317 Bahco Hacksaws. Each hacksaw is supplied with 3 extra blades FREE.
The Komelon Gripper™ Tape has a durable, nylon coated blade with a true zero end-hook and a top blade lock. The blade features both metric and imperial markings. Contained within an ergonomically designed ABS case, with a rubber outer for increased durability and added protection. It also has a handy belt clip. Accuracy: EC Class II. 12 x tapes supplied in a countertop display.
The Komelon Gripper™ Tape has a durable, nylon coated blade with a true zero end-hook and a top blade lock. The blade features both metric and imperial markings. Contained within an ergonomically designed ABS case, with a rubber outer for increased durability and added protection. It also has a handy belt clip. Accuracy: EC Class II. 12 x tapes supplied in a countertop display.
Stabila 81S-10ML Magnetic Torpedo Level Display, Box of 10 Levels. The Stabila 81S Torpedo Level has a strong cast aluminium T profile making it easy to hold. The particularly slender trapezoidal bevelled shape makes it suitable for working in cramped spaces. The die-cast frame has 1 milled measuring face and protecting noses to prevent damage to milled face. Additional magnets mounted in the milled measuring surface securely hold this level to scaffolding or beams. 2 Vials: 1 plumb & 1 horizontal.Accuracy: Normal Position: 0.029=0.5mm/m.Accuracy: Overhead Position: 0.043=0.75mm/m.
A selection of wire wheels of assorted sizes and shapes, with 1/4 inch shanks to suit most mains and cordless drills. They are ideal for preparing metal surfaces prior to painting, rust removal, decarbonising motor engines and cleaning of garden and contractors tools. 36 pieces. 18 x 50mm Cup Brushes. 6 x 50mm Circular Brushes. 6 x 65mm Circular Brushes. 6 x 75mm Circular Brushes. Although the wheels are supplied in a bulk of 20, your Faithfull stockist may be able to supply any individual wheel to the purchasers choice. Not suitable for use in die grinders or high speed air tools.
The Stanley 99E Original Retractable Blade Knife is designed with a painted die-cast metal body, which is ergonomically shaped for a good, comfortable grip. The blade extension can be controlled by the blade shifter, and 5 blade positions allows a wider usage for a variety of cutting applications. The interlock nose firmly secures the blade into knife.For safety, the blade can be fully retracted into the body. This Merchandiser contains 12 x 99E knives
Counter Top Display of 50 Advent Professional Universal Sharpeners. Sharpens all pencils and crayons. It has an ergonomic design that is comfortable to use.
Counter display containing 10 x KPX7002160 Diagonal Cutters 160mm with comfort multi-componenet grips. The grips are constructed from chrome vanadium steel, oil hardened, and tempered. The cutting edge is induction hardened to approx 62HRC making them ideal for cutting soft, medium & hard wire. Narrow head with long cutting edge gives good access in confined areas, Strong precision rivet for even movement and long service life. Cutting Capacity: Soft Wire: 4.0mm, Medium Wire: 3.0mm, Hard Wire: 2.0mm