Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 4 Thor split head hammers .Face diameter 50mm (2 in)
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
Claw Hammer with a drop forged, semi-polished, heat treated steel head, a full size round face for accurate striking, and a full claw for maximum pulling power. Blue cushioned rubber grip for comfort.Weight 450g (1lb).
This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented Anti-Vibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.
Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The Faithfull Welders Chipping Hammer has an all steel construction that makes it both solid and strong. It features a striking head with a sharp conical point and a flat chisel bevelled end. The unique helical barrel spring handle helps to prevent kickback and reduces resonance, helping to avoid fatigue during long periods of use. The hammer is fitted with an integral hanging hook for easy storage. Length: 290mm.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Roughneck Gorilla V-Series Double-Ended Scutch Hammer accepts both scutch combs and chisels, making it ideal for stone and masonry dressing. Manufactured from drop-forged, hardened and tempered steel for extreme strength and durability. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 32mm (1.1/4in)
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.1kg (2.1/2 lb)
The Faithfull Carvers Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.
The Roughneck Gorilla V-Series Slater's Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The pick end enables holes to be punched in slates and an integrated nail puller allows nails to be removed with ease. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 2 Thor split head hammers. Face diameter: 38 mm (1 1/2 in).
The Stanley FatMax® Antivibe All Steel Curved Claw Hammer has a one-piece forged construction for durability and balance. With an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 908g (2lb).
The Electrician's hammer is a versatile hammer with a U-shaped striking face ideal for working in confined spaces. The U-shape makes it possible to work close to ceilings and corners without leaving marks on surrounding surfaces while the straight claw makes it easy to get at and remove nails and clamps in confined places. Ergonomically designed handle for a good grip along the entire handle, regardless of power or precision. Weight: 550g.
The Faithfull Ball Pein Hammers are a universal engineers metal working hammer, precision ground with hardened striking faces to withstand the rigours of all metal working applications. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. Manufactured in accordance to BS876.Weight 1360g (3 lb)
1 x Bahco 428 Curved Fibreglass Claw Hammer 570g (20oz). The Bahco 428 Curved Claw Hammer has an octagonal neck and a brightly polished round head. Fitted with a fibreglass handle for maximum shock absorption and a comfortable black hand grip. The shaft is painted a bright orange, making it easier to find in a toolbox.
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 3.Diameter: 44mm (1 3/4in).Weight: 1550g (3 1/4lb).
The Estwing Surestrike straight claw framing hammer has a forged solid steel head and a genuine top grade hickory handle. Weight 700g (1lb 9oz)Milled face
The Estwing Ultra Series Claw hammers are are one-piece forged and are engineered lighter to drive nails faster. An extra pulling notch is built into the head, along with a magnetic nail starter. This hammer has a traditional leather handle grip made from sole leather washers pressed on and riveted. Made in the USA from high quality steel. Specifications:Weight: 425g (15oz).Handle length: 343mm (13.1/2in).
The Estwing E322P square section rock pick hammer has a flat face at one end and a pick at the other.Used by slaters or geologists it has a liquid vinyl grip handle bonded on to the shaft during production for added grip and comfort. These Estwing high quality chisel geological hammer picks use the strongest steel which is forged in one-piece. The strongest known construction of its type. A tool designed for the geologist when working with rock or rubble. Weight: 620g (1 lb 6oz)
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 590g (1 1/2lb).Diameter 32mm (1 1/4 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size A Thor split head hammers .Face diameter 25mm (1 in)
This Faithfull curved claw hammer has a polished steel head which has been correctly hardened and tempered. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. Manufactured in accordance with BS876.Weight: 570g (1 1/4 lb)
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 680g (1 1/2lb).
Stanley Club Hammer with a fibreglass core for greater strength and longer durability. The shaft is covered by an ergonomic, anti-slip, bi-material handle. It has a drop forged alloy steel head with polished faces and chamfered edges. The head and handle have a reinforced connection, held by a 2-component epoxy resin adhesive.1 x Stanley Fibreglass Club Hammer 1.25kg (2.3/4lb)
The Wiha Safety Hammer comes with a dual sided head. The blue soft head is ideal for furniture work and interior decorating, minor assembly. The yellow medium-hard head is ideal for tool and machine engineering, car repairs, sheet metal and assembly work.Makes work easier, with an optimum impact effect and less effort needed. Fitted with an ergonomic hickory wooden handle. GS tested. Specifications: Hammer Face Diameter: 40mm.Hammer Head Height: 110mm.Overall Length: 325mm.Weight: 620g.
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO416. Diameter: 50 mm (2in).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 2.Diameter: 38mm (1 1/2in).Weight: 960g (2lb).
Thor Replacement white super plastic split head faces are special shaped and manufactured from ultra-high molecular weight polythene which will not fracture, splinter or delaminate on use. The Ultra-high molecular weight Polythene when fitted into Malleable iron heads provide high impact, durability and high abrasive resistance. These faces can be used as an alternative to Rawhide.For use with THOSPH275 Thor split head super plastic hammer. Face diameter: 70 mm (2 3/4in).
Thor super plastic hammers have a malleable iron head fitted with cylindrical ultra-high molecular weight polythene faces which are designed to wear and be replaced. Available in 3 different weights. The ultra-high molecular weight polythene heads provide high impact, durability and high abrasive resistance. The faces will not fracture, splinter or delaminate. Ideal for use as a general-purpose, soft-faced hammer in engineering applications for assembly, repair and maintenance operations as an alternative to a rawhide faced hammer.Size: 3.Weight 1300g (3lb).Diameter 44mm (1 3/4 in).
