The Estwing E3 series curved claw hammers have a vinyl grip made from liquid vinyl bonded on to the shaft during production, which offers the utmost in both comfort and durability, while reducing vibrations caused by impact. The conventional carpenter's curved claw hammer offers unsurpassed balance and temper. Made in the USA from high-quality steel.Weight 680g (24oz)
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.One soft grey and one hard white face.Diameter 38mm (1 1/2 in).Weight: 650g (1 1/2lbs).
Thor Nylon hammers have a choice of plastic grip or wooden handles with Chrome plated Zinc heads with Nylon faces, these are fitted as standard, available in 6 different weights. Alternative faces, colour coded to distinguish hardness are also available. The faces are designed to wear and are replaceable by hand. Available in 6 sizes each with different weights, Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc. THO406 and THO408 are fitted with wooden handles while THO410, THO412, THO414 and THO416 have plastic handles.Weight 900g (2lb).Diameter 44mm (1 3/4 in).
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 300g (10oz).Size: 54mm (2 1/8 in). White Head
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size 4Weight 2500g (5 1/2lb)Diameter 50mm (2 in)
Roughneck Claw Hammer is manufactured from drop forged hardened and tempered alloy steel, and with a fully polished head. Tubular steel handle with a strong head to shaft connection. The ergonomically designed grip is riveted to the handle for additional safety. Unique triple injected TPR soft-grip handle for comfort during use and reduced fatigue.Weight: 567g (20oz).
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO412. Diameter: 38 mm (1 1/2in).
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 4.Weight 2000g (4 1/2lb).Diameter 50mm (2 in).
Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces. Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 2.Weight 1260g (3lb).Diameter 38mm (1 1/2 in).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 3.Weight 1940g (4 1/2lb).Diameter 44mm (1 3/4 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: A.Weight 355g (14oz).Diameter 25mm (1 in).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 38mm (1 1/2 in).Weight 650g (1 1/2lb).
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 525g (1lb 3oz)Diameter 64mm (2 1/2 in). White Head
The Roughneck High Velocity Turbo Hammer has a one-piece forged handle construction offering maximum strength and safety. The hammer's special head design and triple injected air cushion grip reduce shock and the transmission of vibrations to the hand and provide a comfortable grip. The magnetic nail holder makes starting easy, especially in hard to reach places. The narrow long shank allows users to strike more accurately at an increased speed. This increased velocity results in higher striking forces at the point of impact and in turn, greater overall tool effectiveness.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 44mm (1 3/4 in).Weight 850g (2lb).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 5 Thor split head hammers.Face diameter 63mm (2 1/2in)
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: A.Diameter 25mm (1 in)
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO406. Diameter: 19 mm (3/4in).
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 2.Diameter: 38mm (1 1/2 in).Weight: 960g (2 lb).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 5.Weight 6000g.Diameter 70mm (2 3/4 in).
Thor deadblow hammers have coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces. Available in 5 different weights. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. Thor deadblow hammers are ideal as a multi-purpose striking tool and are ideal for sustained and effective blows without recoil. They are commonly used in most assembly / fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.Replacement faces are available.Diameter 50mm (2 in).Weight 1150g (2 3/4lb).
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: 5.Diameter 70mm (2 1/2in)
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: 3.Diameter 44mm (1 3/4 in)
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Medium T Block Combi Deadblow Hammer 350g (0.7lb)
This Roughneck Club Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Club Hammer Fibreglass Shaft 1.81kg (4 lb)
The Estwing E322 Straight Claw Hammer has a one-piece forged steel construction, with Estwing's world famous blue shock reduction nylon vinyl grip. Offering comfort and durability whilst reducing vibrations caused by impact. This hammer is designed for framing work with its straight claw and longer handle. Made in the USA from high quality steel.The Estwing Big Blue Straight Claw Framing Hammer is designed for frame work.The long handle is for greater impact when striking a nail.The handle grip is made from liquid vinyl, bonded on to an all-steel shaft during production. Blue shaft. Weight 700g (1 lb 9oz).Length 460mm (18in).
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight 450g (1 lb)
These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA from high quality steel.The ESTE619S Ultra Framing Hammer has the following specifications: Weight: 540g (19oz).Handle length: 349mm (15.1/2in).
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 325g (11oz).Diameter 54mm (2 1/8 in) Black Head
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight: 680g (1 1/2lb).
The Roughneck Ball Pein Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Ball Pein Hammer Fibreglass Shaft 1.36kg (48oz)
The Roughneck Gorilla Club Hammers are precision forged from high carbon steel. Each hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both striking faces are induction hardened for hardness.The hammers also have a side striking face, which is not hardened. This is designed for striking wooden posts.A shock absorbing TPE grip handle provides maximum comfort.1 x Roughneck Gorilla Club Hammer 1.4kg (3lb)
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: 1.Diameter: 32mm (1 1/4 in)
