The Roughneck Gorilla Club Hammers are precision forged from high carbon steel. Each hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both striking faces are induction hardened for hardness.The hammers also have a side striking face, which is not hardened. This is designed for striking wooden posts.A shock absorbing TPE grip handle provides maximum comfort.1 x Roughneck Gorilla Club Hammer 1.8kg (4lb)
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 830g (2lb).Diameter 32mm (1 1/4 in).
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 450g (1 lb)
The Electrician's hammer is a versatile hammer with a U-shaped striking face ideal for working in confined spaces. The U-shape makes it possible to work close to ceilings and corners without leaving marks on surrounding surfaces while the straight claw makes it easy to get at and remove nails and clamps in confined places. Ergonomically designed handle for a good grip along the entire handle, regardless of power or precision. Weight: 550g.
The Hultafors T Block Cross Pein Hammer is an ergonomically designed hammer which increases precision and reduces strain. The head is filled with steel ball bearings to dampen vibrations and reduce recoil. Fitted with an ergonomically designed handle affording good grip along the entire shaft. Counterweights in the shaft inhibit rotation.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat treated for hardness. The hammers also each feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Mini Sledge Hammer has the following specifications: Weight: 1.4kg (3lb).Length: 345mm.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat treated for hardness. The hammers also each feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Mini Sledge Hammer has the following specifications: Weight: 1.8kg (4lb).Length: 345mm.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Sledge Hammer has the following specifications: Weight: 5.5kg (12lb).Length: 780mm.
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Sledge Hammer has the following specifications: Weight: 3.6kg (8lb).Length: 780mm.
Thor deadblow hammers have coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces. Available in 5 different weights. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. Thor deadblow hammers are ideal as a multi-purpose striking tool and are ideal for sustained and effective blows without recoil. They are commonly used in most assembly / fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.Replacement faces are available.Diameter 38mm (1 1/2 in).Weight 700g (1 3/4 lb).
The Roughneck Ball Pein Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Ball Pein Hammer Fibreglass Shaft 680g (24oz)
Faithfull general purpose sledge hammer for builders and contractors.Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection. Manufactured in accordance with BS876.Weight: 6350g (14lb)
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 5.Diameter: 70mm (2 3/4 in).Weight: 3625g (7 1/2 lb).
Thor cylindrical copper faces are manufactured from 99.9% pure extruded electrolytic copper rod. These copper faces when fitted into a malleable iron head prevent damage to expensive machined sub components and assemblies. These Thor copper face heads are ideal where a heavy blow is required in a relatively small striking area. The faces are designed to wear and can be easily replaced.Size: 3.Diameter 44mm (1 3/4 in)
The Estwing E322 Straight Claw Hammer has a one-piece forged steel construction, with Estwing's world famous blue shock reduction nylon vinyl grip. Offering comfort and durability whilst reducing vibrations caused by impact. This hammer is designed for framing work with its straight claw and longer handle. Made in the USA from high quality steel.Weight 620g (1 lb 6oz)
These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. Made in the USA from high quality steel.The ESTE619S Ultra Framing Hammer has the following specifications: Weight: 540g (19oz).Handle length: 349mm (15.1/2in).
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 2. Weight 170g (6oz).Diameter 38 mm (1 1/2 in).
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 1 Thor split head hammers .Face diameter 32mm (1 1/4 in)
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 1.Weight 590g (1 1/2lb).Diameter 32mm (1 1/4 in).
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 3. Weigh : 225g (1/2 lb).Diamete: 44 mm (1 3/4 in).
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 4. Weight 340g (3/4 lb)Diameter 50 mm (2 in).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 44mm (1 3/4 in).Weight 850g (2lb).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 4.Weight 2830g.Diameter 50mm (2 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 2Weight 1070g (2.1/2lb).Diameter 38mm (1.1/2in).
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 1450g (3.1/4lb).Diameter: 90mm (3.1/2in). White HeadNon Marking
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 680g (1 1/2lb)
These Estwing Ultra Series Framing Hammers are solid forged in one piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have Estwing's world famous blue shock reduction nylon vinyl grips. The milled face aids gripping of the nail head when striking. Made in the USA.The ESTE619SM Ultra Framing Hammer has the following specifications: Weight: 540g (19oz).Handle length: 349mm (15.1/2in).
The curved claw head is made from forged, heat treated steel and the oval tubular steel shaft combines strength with a lightweight feel.The flock filled vinyl grips are impervious to heat, oil and most solvents.Weight: 454g (1 lb).
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 680g (1 1/2lb).
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS30 Non-Rebound Hammer
Claw hammer with first class genuine hickory handle. Octagonal neck and round head - bright polished. Handle shaped for maximum grip with anti-slip surface.Weight 450g (1 lb)
Roughneck Mini Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection. They have shorter fibreglass handles than the traditional Sledge Hammers, which make them ideal for use in places where a large swing cannot be taken or using a full length sledge hammer is not practical. They can easily be carried in tool boxes and tool bags.Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16in Weight: 1.8kg (4lb)
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight 570g (1 1/4lb)
Estwing Curved Claw Hammer with one-piece forged steel construction, and a traditional leather handle grip made from sole leather washers pressed on and riveted. The conventional carpenters' curved claw hammer offers unsurpassed balance and temper. Made in the USA from high quality steel.Weight: 680g (1 1/2lb).
