VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: Black.Size: 1m x 20mm.
VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: White.Size: 1m x 20mm.
VELCRO® Brand Hook & Loop Heavy-Duty Stick On Tape is the quick and easy to use alternative to nails, screws and glues. With extreme holding power, holds weight up to 7kg per 50mm x 100mm piece (adhesive reaches maximum strength after 24 hours). To use: clean and dry both surfaces. Peel backing paper and press firmly to surfaces. Allow 15 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black.VELCRO® Brand Heavy-Duty Stick On Tape comes in the following: Colour: White.Size: 1m x 50mm.
The Stanley Heavy-Duty Glue Gun with convenient fold down stand for use between applications. Uses dual melt 11.3mm glue sticks for full range of materials, and has a high/low melt switch. Input Power: 40 Watt.Glue Sticks: 11.3mm Dual Melt.
VELCRO® Brand Hook & Loop Heavy-Duty Stick On Tape is the quick and easy to use alternative to nails, screws and glues. With extreme holding power, holds weight up to 7kg per 50mm x 100mm piece (adhesive reaches maximum strength after 24 hours). To use: clean and dry both surfaces. Peel backing paper and press firmly to surfaces. Allow 15 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black.The VEL60244 Heavy-Duty VELCRO® Brand Stick On Tape comes in the following: Colour: White.Size: 5m x 50mm. Allow 15 minutes to set (or longer for heavier items) before attaching.
VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: White.Size: 10m x 20mm.
These Forgefix Flat Mudguard Washers have a large 50mm outside diameter. They are bright Zinc Plated for increased corrosion resistance. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Mudguard Washers ZP M8 x 50 Bag 10
Type 8/180/300/E/J brad nails. Suitable for use with all Stanley brad nailers. Plastic box of 1,000 nails.Fits Stanley: TR200series, TRE500series, 69-702, 69-721 and SWK-BN125 Size: 15mm Qty: 1000
J-B Weld HighHeat trade; is a heat-resistant epoxy adhesive for bonding and gap filling substrates exposed to high temperatures up to 260 deg;C (500 deg;F). Resistant to water, chemicals and heat. Perfect for repairing vehicle exhausts, rust damage and other high heat automotive parts. It can be used on aluminium, brass, copper, iron and stainless steel. Specifications: Bonding Strength: 4,730 PSI.Set Time: 1 Hour.Cure Time: 24 Hours (room temp) or 1 Hour (with heat).Colour When Dry: Dark Grey.Size: 25ml.
Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications: Mix Ratio: 1:1Work Life: As a mix: 4 1/2 - 5 minutesSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity 25°C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: ClearViscosity 25°C: 130 poiseSpecific Gravity: 1.14
VELCRO® Brand Hook & Loop Heavy-Duty Stick On Tape is the quick and easy to use alternative to nails, screws and glues. With extreme holding power, holds weight up to 7kg per 50mm x 100mm piece (adhesive reaches maximum strength after 24 hours). To use: clean and dry both surfaces. Peel backing paper and press firmly to surfaces. Allow 15 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black.The VEL60243 Heavy-Duty VELCRO® Brand Stick On Tape comes in the following: Colour: Black.Size: 5m x 50mm. Allow 15 minutes to set (or longer for heavier items) before attaching.
This Forgefix Contractors Fixing Band is a medium-duty, flexible and strong band which is easy to cut and bend. The band has pre-punched holes for fixing bolts and screws, and is made from galvanised steel for protection against corrosion. Supplied in 10m rolls in a durable cassette. APPLICATION:Ideal for fixing, supporting joists and many more superficial installations.Can be used with screws and galvanised twist nails. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Contractors Galvanised Fixing Band Medium Duty 12mm x 0,7 x 10m Box 1
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 100 Bag 10
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm
These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Penny Washer ZP M6 x 25mm Bag 10
These Forgefix Screw Eyes are Zinc Plated for increased resistance to corrosion. They simply screw directly into timber and similar materials. Drilling a pilot hole is advisable. The screws are also suitable for use with all types of wall plugs. APPLICATIONScrew Eyes are used to attach cables, wires and twine to numerous applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Screw Eyes ZP 75 x 18g Bag 10
The Everbuild SBR Bond is a latex based, water-resistant bonding agent and admixture for use in areas subject to humidity, dampness and continuous water contact. Improves water resistance of cement mixtures by forming a reinforcing polymer that increases long-term durability and flexibility of the mix on renderings and floor screeds. Polymer Emulsions of this type have been used extensively over the last 20 years by the building industry as an admixture for cement and concrete applications, including repair and renovation, surfacing of floors and bonding generally. It contains anti-foam to control the density of cementitous mixes and is also freeze thaw stable, with improved frost resistance. It offers greatly improved adhesion to a wide range of substrates including dense concrete, steel, tiles etc.Everbuild 503 SBR Bond 2.5 Litre.
Butyl Glazing Compound is specially formulated for glazing double glazed units into timber window frames where a timber bead is to be used. Suitable for both soft and hardwood frames.-Elastic formulation - moves with the frame.-Easier to apply than most competitive putties.-Extended shelf life-Added plasticiser improves adhesion and helps prevent cracking. -Suitable for use with laminated/heat absorbing glass.-Bedding insulated glass units-Glazing greenhouses (metal and timber)- Unsuitable for plastic frames, or frames treated with decorative. microporous stains
Everbuild Evercryl is a resin based, fibre reinforced roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. Evercryl may also be applied in frosty conditions down to -5°C. Evercryl One Coat is instantly waterproof when applied, so there is no fear of washoff. Emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. Evercryl One Coat is brush applied and dries to a smooth seamless flexible membrane which resists algae and fungal growth. Because of the high level of fibre reinforcement, Evercryl One Coat will bridge small cracks and requires only a one coat brush application to give instant and total water protection, even in areas subject to ponding. Evercryl One Coat requires no primer on sound non-porous surfaces. BENEFITS- May be applied in damp and wet conditions.- Formulated from lightfast acrylic polymers to withstand sunlight for longer periods than traditional bitumen coatings.- Fibre reinforced to bridge small cracks.- Primerless adhesion to most bituminous and non-porous surfaces. AREAS FOR USE- General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions - for use on concrete, fibre/cement, roofing felt mastic asphalt, existing bituminous roof coatings, rigid PVCu corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc. - Waterproofing guttering (plastic and metal), downpipes, gully, flashings, upstands, vents and leadwork.1 x Everbuild Evercryl One Coat. Colour: ClearSize: 5kg
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 6 x 150mm Box 100
Lightweight Soldering Iron with heat-resistant handle, suitable for soft soldering metal alloys, brass and copper.The working temperature is reached quickly and a metal holder is supplied to keep the hot iron safely at rest when not in use.Ideal for fine soldering and hobby work on circuit boards, jewellery and models or for repair work on electrical items. Fitted with 13amp plug. Voltage: 230/240 Volt.Input Power: 80W.Tip Width: 5.7mm.
The Gripit Assorted Kit includes a selection of 32 x Plasterboard Fixings, ideal for fixing a variety of objects to plasterboard walls. Easy to install. Contains: 8 x Gripit Yellow 15mm (Max. Hold 71kg) with 8 x Screws 4.0 x 25mm. 8 x Gripit Red 18mm (Max. Hold 74kg) with 8 x Screws 5.0 x 30mm. 8 x Gripit Brown 20mm (Max. Hold 93kg) with 8 x Bolts M6 x 30mm. 8 x Gripit Blue 25mm (Max. Hold 113kg) with 8 x Bolts M8 x 30mm.
The Rapid R13E and R53E Staple Guns are ideal for hobby and DIY applications. Suitable for home decor, securing textiles, reupholstery and light-duty repair. They fire fine wire staples that are barely visible and have minimal effect on the textile fibres. An easy colour match staple system ensures you have the right size staple. Made in tough, robust plastic with all steel wear parts inside. The staple guns are recoilless for comfort during long term use and also have a noise damper and an integrated locking function for storage. The ergonomic design with low-angle handle ensures a comfortable fit in the hand and are easy-to-use. R53E Fires: Type 53 Fine Wire Staples: 4-10mm.R13E Fires: Type 13 Fine Wire Staples: 4-10mm. Covered by a 2 year guarantee. Made in Sweden.The Rapid R53E fires Type 53 fine wire staples 4-10mm.
Jubilee Wingspade® clips are made from zinc protected mild steel and used for fixing flexible rubber hoses etc. They feature a plastic Jubilee Wingspade® fitting instead of the normal 7mm hexagon so that tightening and untightening can be done by hand.Size 1XAdjustment 25 - 40mmAdjustment 1 - 1.5/8in
The Gripit TV Kit includes everything you need to mount a TV bracket to a plasterboard wall. Contains: 4 x Gripit Blue Fixings 25mm.4 x Locking Washers.4 x Flat Washers.4 x Bolts M8 x 30mm.1 x Flat Drill Bit 25mm.
J-B Weld PlasticWeld trade; Epoxy Putty is hand-mixable and fast-setting, only 5 minutes. After mixing, it forms a polymer compound which can be moulded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Resistant to water, chemicals and heat. Perfect for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. Specifications: Bonding Strength: 3,900 PSI.Set Time: 25 Minutes.Cure Time: 3 Hours.Colour When Dry: Off White.Size: 57g.
The Stanley TR110 Heavy-Duty Sharpshooter Staple Gun with a lock down handle for easier storage. Staple reload window allows you to reload staples when needed. Ideal for upholstery, boards, foam, fabrics and gardening applications. Fires: Staples: 6-14mm TRA700 Series.
Plasplug HW 124 White Single Hollow Door Hook, suitable for hollow doors and partitions, with an integral fixing and screw. Recommended Drill Bit Size: 8.5mm.
Plasplugs specialised, Hollow Door Fixings are ideal for fitting coat hooks, name plates and other fixings to the narrow gauge of hollow doors and panels. These tough, compact fixings have a rivet type action that grips the inside of the panel. Expanding wings grip securely in hollow doors, thin skin partitions, plywood and fibreglass. Multi-thread technology ensures superior holding power, ideal for the home, boat and caravan. Accepts No. 6 Screws.Drill size: 6mm.
These Forgefix Vine Eyes simply screw into timber and similar materials. Drilling a pilot hole is advisable.The screws are zinc plated for increased resistance to corrosion, and the screw thread is suitable for use with all types of wall plugs. APPLICATION:Vine Eyes are used to attach cables, wires and twine for many numerous applications. Widely used in gardening and agricultural services. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.
Rapid No.8 Brad Nails 18Ga are versatile and high-quality. These high-performance, galvanised brads are ideal for many different kinds of finishing applications such as moulding, beading or working with frames. Precision cut legs optimise material penetration.These Rapid No.8 Brad Nails have the following specification: Leg Length: 40mmGauge: 18Suitable For: PB131 & PBS151
VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: Black.Size: 10m x 20mm.
