The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502742 Auger bit - long series has the following dimensions:Drillbit diameter: 8.0mmTotal length: 400mmWorking Length: 323mm
Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 35 mm Overall Length: 152 mm
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length: 400mm.Size.8 mm x 400 mm.
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 18mmWorking Length: 100mmOverall Length: 200mm
The Irwin Long Series Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 400mm in length and 10% larger in diameter for added durability.The Irwin IRW10502834 Blue Groove 4X long flat bit has the following dimensions:Drill bit diameter: 13.0mm
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502777 Auger bit - long series has the following dimensions:Drillbit diameter: 26.0mmTotal length: 400mmWorking Length: 323mm
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 9mmWorking Length: 155mmOverall Length: 230mm
The Bahco 9627 Series Long Combination Auger Bit is longer than a standard auger bit, designed for long reach applications. Made from hardened tool steel, lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9627 Series Long Combination Auger Bit has the following specification: Size: 16mmWorking Length: 385mmOverall Length: 460mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-22 Flat Bit 22mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-16 Flat Bit 16mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-32 Flat Bit 32mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-12 Flat Bit 12mm
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 16mmWorking Length: 155mmOverall Length: 230mm
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 6mmWorking Length: 155mmOverall Length: 230mm
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 8mmWorking Length: 155mmOverall Length: 230mm
DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4516QZ Brad Point drillbit has the following dimensions:Size: 16 x 165mm
Bahco 9526 Combination Auger Bit Set, contains six of the most popular sizes. These are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood. Supplied in a wallet case. Sizes: 10, 13, 16, 19, 22 and 25mm.
The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 28 mm.Length : 165 mm.
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length: 400mm.Size.6 mm x 400 mm.
The DEWALT Flat Wood Drill Bit is made from high quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hard and soft wood, chipboard and other man made materials.1 x DEWALT Flat Wood Drill Bit 16 x 160mm
DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4509QZ Brad Point drillbit has the following dimensions:Size: 9 x 130mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502760 Auger drill bit has the following dimensions:Drillbit diameter: 17.0mmTotal length: 191mmWorking Length: 126mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502780 Auger drill bit has the following dimensions:Drillbit diameter: 30.0mmTotal length: 240mmWorking Length: 175mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502754 Auger drill bit has the following dimensions:Drillbit diameter: 14.0mmTotal length: 191mmWorking Length: 126mm
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502773 Auger bit - long series has the following dimensions:Drillbit diameter: 24.0mmTotal length: 400mmWorking Length: 323mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502747 Auger drill bit has the following dimensions:Drillbit diameter: 11.0mmTotal length: 191mmWorking Length: 114mm
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 22mm.Length: 152mm.
Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.Size. 19 mm x 200 mm.
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 13mm.Length: 152mm.
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 10mm.Length: 152mm.
The Bahco 9627 Series Long Combination Auger Bit is longer than a standard auger bit, designed for long reach applications. Made from hardened tool steel, lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9627 Series Long Combination Auger Bit has the following specification: Size: 22mmWorking Length: 385mmOverall Length: 460mm
DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes. Suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood. For diameters 11mm and above, the shank is reduced to 9.5mm. The DEWALT DEWDT4513QZ Brad Point drillbit has the following dimensions:Size: 13 x 155mm
The DEWALT Self-Feed Drill Bits are ideal for drilling of clean holes in wood, MDF, hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self feed' spur for rapid penetration into material. They are fitted with a non-slip shank for better in chuck bit retention. For use with corded and cordless drills.These DEWALT Self-Feed Drill Bits have the following specification: Diameter: 74mm.
Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.Size. 16 mm x 200 mm.
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 20mmWorking Length: 100mmOverall Length: 200mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-26 Flat Bit 26mm
