Evo-Stik white Tile A Wall Fast Set Grout For Ceramic Tiles is a cement-based powder grouting material, suitable for finishing joints of internal and external ceramic tile installations. When set, Evo-Stik Tile A Wall Fast Set Grout For Ceramic Tiles is completely water-resistant and will not wash out of joints. It is recommended for joints up to about 3 mm wide. Suitable for ceramics, mosaics and natural stone walls, ideal for interior uses including kitchens, bathrooms and showers, it is easy to mix with water and sets to leave a professional finish that is resistant to mould growth. 1kg of powder, when mixed, will grout approximately 5m². Coverage is dependent on the nature of the substrate, the adhesive bed thickness and the type of tile.
EVO-STIK General Purpose PVA is an adhesive, primer, sealer and dustproofer that’s suitable for interior use. It will bond most building materials provided that one of the surfaces is porous. When used as a primer, EVO-STIK General Purpose PVA improves adhesion and bond strength to porous or difficult surfaces. Suitable materials: Bonds most materials, provided one of the surfaces has a degree of porosity e.g. timber, plywood, blockboard, chipboard, fibreboard, expanded polystyrene, polyurethane foam, insulating board, brick, concrete, stone, and slate.
EVO-STIK Mould Resistant Wall Tile Adhesive & Grout is an easy-to-use, ready-mixed wall tile adhesive and grout for all sizes of ceramic tiles, which fixes the tiles in place as well as sealing them. This mould resistant grout and adhesive has good waterproof properties which make it ideal for use in kitchen and bathroom areas subject to frequent and prolonged wetting, including domestic shower walls.The high strength formula of EVO-STIK's mould proof grout and adhesive sets in 24 hours, meaning the freshly tiled area is available for use the following day. Supplied in a post-consumer recycled (PCR) bucket.Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement renders and tile backer boardsSuitable tiles: Ceramic wall tilesCoverage: 4.1m² dependent on tile size and substrate. Grouts up to 6m² per kg
1 x EVO-STIK Mould Resistant Wall Tile Adhesive & Grout 1 litre
EVO-STIK General Purpose PVA is an adhesive, primer, sealer and dustproofer that’s suitable for interior use. It will bond most building materials provided that one of the surfaces is porous. When used as a primer, EVO-STIK General Purpose PVA improves adhesion and bond strength to porous or difficult surfaces. Suitable materials: Bonds most materials, provided one of the surfaces has a degree of porosity e.g. timber, plywood, blockboard, chipboard, fibreboard, expanded polystyrene, polyurethane foam, insulating board, brick, concrete, stone, and slate.
1L
EVO-STIK Decorators Caulk Instantly Paintable can be overpainted immediately with water based and synthetic paints to give a fast, smooth and professional finish to any decorating job while saving you time and money. It can be applied to most surfaces including: brick, plaster, concrete, mortar, stone, wood and paint without the need for a primer, and because it has been tested in conjunction with paint manufacturers, it ensures there is no paint discolouration. It is ideal for filling fine cracks and gaps where movement can occur, such as between walls and window frames, door frames, skirting boards, window sills and architraves. Easy to apply and clean, it uses non-crack technology to give a super smooth finish to any job.
Bostik Flashband with Primer is a self-adhesive flashing tape that bonds instantly to a wide range of building materials providing a permanent, watertight seal in all climates. Supplied with a primer for improved adhesion on porous or rough surfaces, the flexible bitumen flashing tape is compatible with brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt and rigid plastics.Flashband tape can be applied with hand pressure and a seam roller, eliminating the need for special equipment for cutting, forming or fixing. This durable flashing tape is tear and impact resistant thanks to its four layers of protection. Capable of withstanding extreme temperatures between -10°C and 100°C, it is ideal for new build, maintenance and repair projects.The waterproof flashing tape is particularly effective in repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, greenhouse repairs, protecting glazing bars, protecting insultation for pipes and tanks and repairing roofing felt joints on flat roofs.Suitable materials: Brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, glass, roofing felt and rigid plastics.
Size: 150mm x 3.7m
Evo-Stik Flashband is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies.Special Grey Finish. Width: 300mmLength: 10m.
Evostik fast setting, extra strong weatherproof wood adhesive for interior or exterior use.Complies with EN 204 Type D3 - weatherproof, water-resistant wood adhesive.Dries to a clear finish that can be sanded, painted or stained.Suitable for all types of wood.No mess, clog-free nozzle and twist to seal cap.Anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size. 500ml.
This non-drip, non-stringing contact adhesive has Thixotropic ( the property of certain gels or fluids that are thick or viscous under normal conditions, but flow or become less viscous over time when shaken or agitated) as a main formula that allows slight adjustment of small areas. This contact adhesive is ideal for vertical and overhead surfaces, has high strength with a permanent bond, and low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, Glass. (Not suitable for use on polystyrene or cellulose painted surfaces).Size. 1litre.
A general purpose one-part contact adhesive suitable for bonding laminates, wallboards, plywood and hardboard panels, and leather goods. It has a high initial grab that bonds on contact, a high shear strength and good temperature resistance with an excellent final bond strength with low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, and Glass(Not suitable for use on polystyrene or cellulose painted surfaces).Size 5 litre tin
Evo-Stik Flashband & Primer is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies. Includes primer for ease of application.Width: 300mmLength: 3.75m
The Evo-Stik Instant Grab Wall Tile Adhesive is for Ceramic Tiles is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds. It has been tested to EN 12004. It is showerproof, the Thin-bed adhesive is Non-slip and suitable for fixing ceramic wall tiles to most types of sound interior surfaces, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles and glazed bricks. The colour off-white/buff and the coverage with a notched trowel is 1.2m² per litre, solid bed 0.3m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. Note that different trowels often apply the adhesive at different rates, usually greater than the above.Evo-Stik Instant Grab Wall Tile Adhesive has the following specification: Size: 2.5 Litre.
All purpose flex silicone sealants are flexible to accommodate movement as well as being weather resistant and waterproof. They contain fungicide for mould resistance and the prevention of dis-colouring, Also Guaranteed for up to 25 years and can be used in interior or exterior job application. Uses: Sealing door and window frames, baths, showers, sinks and much more. Lasts up to 25-years.Colour.Clear.Cartridge Size. C20.
Evo-Stik Reswin W is a fast setting, extra strong wood adhesive is ideal for interior use. Dries to a clear finish that can be sanded, painted or stained. Resin wood glue is suitable for all types of wood and will set stronger than the wood itself. No mess, clog-free nozzle and twist to seal cap, all designed in a handy anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size 500ml.
Evo-Stik Flashband is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies.Special Grey Finish. Width: 225mmLength: 10m.
Evo-Stik white Tile A Wall Fast Set Grout For Ceramic Tiles is a cement-based powder grouting material, suitable for finishing joints of internal and external ceramic tile installations. When set, Evo-Stik Tile A Wall Fast Set Grout For Ceramic Tiles is completely water-resistant and will not wash out of joints. It is recommended for joints up to about 3 mm wide. Suitable for ceramics, mosaics and natural stone walls, ideal for interior uses including kitchens, bathrooms and showers, it is easy to mix with water and sets to leave a professional finish that is resistant to mould growth. 1kg of powder, when mixed, will grout approximately 5m². Coverage is dependent on the nature of the substrate, the adhesive bed thickness and the type of tile.
Evo-Stik Flashband & Primer is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies. Includes primer for ease of application.Width: 100mmLength: 3.75m
The Evo-Stik Waterproof Wall Tile Adhesive is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles, glazed bricks and painted surfaces. The waterproof and non-slip formulation has an extended open time, making it quick and easy to apply. The colour is an off-white and coverage with a Notched trowel is 1.2 m² per litre, Solid Bed 0.3 m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. NOTE that different trowels often apply the adhesive at different rates, usually greater than the above. Tested to EN 12004.Evo-Stik Waterproof Wall Tile Adhesive has the following specification: Size: 10 Litre.
Evostik fast setting, extra strong weatherproof wood adhesive for interior or exterior use.Complies with EN 204 Type D3 - weatherproof, water-resistant wood adhesive.Dries to a clear finish that can be sanded, painted or stained.Suitable for all types of wood.No mess, clog-free nozzle and twist to seal cap.Anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 125ml.
Evo-Stik Reswin W is a fast setting, extra strong wood adhesive is ideal for interior use. Dries to a clear finish that can be sanded, painted or stained. Resin wood glue is suitable for all types of wood and will set stronger than the wood itself. No mess, clog-free nozzle and twist to seal cap, all designed in a handy anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 250ml.
A general purpose one-part contact adhesive suitable for bonding laminates, wallboards, plywood and hardboard panels, and leather goods. It has a high initial grab that bonds on contact, a high shear strength and good temperature resistance with an excellent final bond strength with low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, and Glass(Not suitable for use on polystyrene or cellulose painted surfaces).Size. 1 litre tin.
The Evo-Stik Waterproof Wall Tile Adhesive is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles, glazed bricks and painted surfaces. The waterproof and non-slip formulation has an extended open time, making it quick and easy to apply. The colour is an off-white and coverage with a Notched trowel is 1.2 m² per litre, Solid Bed 0.3 m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. NOTE that different trowels often apply the adhesive at different rates, usually greater than the above. Tested to EN 12004.Evo-Stik Waterproof Wall Tile Adhesive has the following specification: Size: 5 Litre.
The Evostik Sticks Like all weather adhesive is one of the strongest adhesives you can buy, it can bond most surfaces, even if both are impervious. Evostik all weather adhesive will bond damp surfaces and may even be used under water, can be used in any weather, however extreme and may be over painted. Bonds: Most surfaces including wood, concrete, brick, plaster, glass, ceramics, metals, rigid PVC, insulation boards and foam polystyrene.Works in a -40° to + 100° Celsius temperature range.Size 290ml.Colour: Clear.
Gripfill Yellow is a solvent free adhesive which bonds almost any surface and has excellent strength including vertical applications. It is suitable for interior and exterior use (provided bond is covered). Bonds: Wood, plywood, hardboard, chipboard, laminated plastic, brick, rigid insulation material (except polystyrene), metal, stone breeze block, ceramics, concrete, sand/cement screeds, plasterboard, cement composite boards, G.R.P.
EVO-STIK GRIPFILL MAX is a maximum strength, zero solvent, all weather adhesive. It utilises next generation advanced SM polymer bonding technology enabling it to bond to most porous and non-porous building surfaces, anywhere, even in vertical applications. Size: C30 350ml
The Evo-Stik Waterproof Wall Tile Adhesive is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles, glazed bricks and painted surfaces. The waterproof and non-slip formulation has an extended open time, making it quick and easy to apply. The colour is an off-white and coverage with a Notched trowel is 1.2 m² per litre, Solid Bed 0.3 m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. NOTE that different trowels often apply the adhesive at different rates, usually greater than the above. Tested to EN 12004.Evo-Stik Waterproof Wall Tile Adhesive has the following specification: Size: 2.5 Litre.
A one-part contact adhesive ideal for numerous jobs around the home and in the workshop. Provides a High strength strong bond on contact without the need for special support, jigs, clamps or weights. Suitable for bonding many types of substrates. Multi-purpose - the ideal adhesive for emergency repairs.Bonds most materials even non-porous e.g metals.Size Small Tube 30g
This Evostik 1 hour shower sealant is a fast-set bathroom sealant that is ready to use in only one hour and will help in stopping mould. A fast skinning silicone sealant with additional protection against mould/mildew.310mlClear Coverage 10m at a 6mm bead
The Dog's B*ll*cks Multipurpose Adhesive & Sealant can be used on almost all interior and exterior projects. It has an advanced hybrid formula, making it waterproof, UV and mould resistant. Will stick and seal to almost any building material, even wet surfaces, making it suitable for nearly every task. From sticking new skirting boards to repairing your leaky gutter, this sealant can do the job of all the other cartridges in your tool bag. It can also be overpainted, used as a gap filler or caulk and is solvent-free.1 x Evo-Stik The Dog's B*ll*cks Multipurpose Adhesive & Sealant, Crystal Clear 290ml
The Dog's B*ll*cks Multipurpose Adhesive & Sealant can be used on almost all interior and exterior projects. It has an advanced hybrid formula, making it waterproof, UV and mould resistant. Will stick and seal to almost any building material, even wet surfaces, making it suitable for nearly every task. From sticking new skirting boards to repairing your leaky gutter, this sealant can do the job of all the other cartridges in your tool bag. It can also be overpainted, used as a gap filler or caulk and is solvent-free.1 x Evo-Stik The Dog's B*ll*cks Multipurpose Adhesive & Sealant, White 290ml
The Gripfill gap filling adhesive will bond to almost any surface with excellent strength including vertical applications. Evostik Gripfill is a solvent-borne, filled rubber resin adhesive, developed to bond virtually any rigid materials together, regardless of the evenness of the surface. Gripfill is a high strength, one part, gap filling adhesive specially formulated to bond a large variety of materials. Evostik Gripfill is suitable for interior and exterior use (provided bond is covered) Bonds: Wood, plywood, hardboard, chipboard, laminated plastic, brick, rigid insulation material (except polystyrene), metal, stone breeze block, ceramics, concrete, sand/cement screeds, plasterboard, cement composite boards, G.R.P
Evo-Stik Flashband is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies.Special Grey Finish Width: 100mmLength: 10m.
A general purpose one-part contact adhesive suitable for bonding laminates, wallboards, plywood and hardboard panels, and leather goods. It has a high initial grab that bonds on contact, a high shear strength and good temperature resistance with an excellent final bond strength with low odour. BONDS: Decorative laminates, Rigid PVC, Wood, Chipboard, Hardboard, Cork, Leather, Rubber, Stone, Metal, Dense film fabrics, Ceramics, and Glass(Not suitable for use on polystyrene or cellulose painted surfaces).Size. 500 ml tin.
Permanent bond for adhering most types of flooring in either sheet or tile format . The ready mixed, easy to use adhesive may be used on interior porous floors.A synthetic rubber/aqueous adhesive for fixing most types of PVC flooring, cork tiles, linoleum, latex foam or jute backed carpeting to substrates.1 Litre Tub.
A one-part contact adhesive ideal for numerous jobs around the home and in the workshop. Provides a High strength strong bond on contact without the need for special support, jigs, clamps or weights. Suitable for bonding many types of substrates. Multi-purpose - the ideal adhesive for emergency repairs.Bonds most materials even non-porous e.g metals.Size: 250ml tin.
Evostik fast setting, extra strong weatherproof wood adhesive for interior or exterior use.Complies with EN 204 Type D3 - weatherproof, water-resistant wood adhesive.Dries to a clear finish that can be sanded, painted or stained.Suitable for all types of wood.No mess, clog-free nozzle and twist to seal cap.Anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 250ml.
