Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish. Fitted with a 32 tpi blade for metal cutting. Blade length: 150mm (6in).
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).
The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 TPI.
The Stanley FatMax® Tenon Back saws have the following features:Reinforced back for extra rigidity makes a straighter cut; Handle screwed to blade for extra strength;Finger rest - ergonomic design, useful for extra control when starting a cut;Triple edged teeth cut on both push and pull strokes for ease of cutting;Induction hardened teeth; 45° and 90° angle quick reference points;Bi-material handle for improved grip and comfort.The Stanley 2-17-199 FatMax® Tenon / Back saw has triple edged induction hardened teeth with a durable bi-material handle for grip. It cuts on both the push & pull stroke meaning it cuts even quicker, the handle has built in 45° and 90° angle quick reference points and has the following specifications: Length 300mm (12in)Teeth 11tpi
The Stanley FatMax® Hardened and tempered blade for durability and long life. Moulded handle combining high impact plastic and soft touch inserts for improved comfort and control. Large smooth end pad to facilitate pushing and twisting blade through plasterboard. Sharp point for piercing board. Aggressive triple bevel teeth for a faster cleaner cut. Blade Length: 150mm (6in).Teeth 7 tpi.
Irwin Pullsaw Dovetail Saw is designed to cut on the pull stroke. The thin blade and the teeth setting offer a cleaner cut and superb finish. The dovetail saw is suitable for flush cutting and fine, detail cutting. Blade Length: 185mm (7.1/4in).Teeth: 22 tpi.
IRWIN® Junior Saw Blades provide improved cutting performance. Their tooth geometry delivers higher resistance against tooth strippage and increases longevity and durability. Leveraging the advantages of WeldTec™ technology, IRWIN® hacksaw blades allow for faster, smoother and less tiring cutting. Can be used on wood. Specification: Length: 150mm (6in)TPI: 14
The IRWIN Jack 880UN Universal Toolbox Saw has all the features and benefits of a standard Jack 880, with the convenience of a 14in 'short' blade. The saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing four times the added protection than conventional anti-rust agents. The handle has integrated 90° and 45° angles to aid the user when marking out. Blade Length: 350mm (14 inch).Teeth: 8 tpi.
The Faithfull Mini Saw heavier version of the junior hacksaw with an epoxy coated steel frame and moulded pistol-grip handle which incorporates the blade tensioning nut, supplied with a hardened and tempered blade which is ideal for small cutting jobs in metal and wood. Blade Length 150mm (6in).Replacement blades. (FAIJHB or FAIJHBS).
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-30-23 Bowsaw is supplied with a raker tooth blade, for wet cutting. Specification Size: 755mm (30in).Weight: 865g.
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-21-51 Bowsaw is supplied with a peg tooth blade, for dry cutting. Specification Size: 530mm (21in).Weight: 680g.
Precision ground, super-efficient bi-metal blade that is faster and lasts longer on tough materials. The high-speed steel cutting edge is welded to a tough alloy steel back that provides optimum tool life together with a high resistance to breakage. Blade cross section 13 x 0.65 mm (1/2 x 0.025 Inch). Blade length: 300mm (12in).50 x Starrett ;Bi-Metal Unique Safe-Flex Hacksaw Blades 300mm (12in) x 18tpi
Uniformly hardened throughout, they hold the edge when cutting difficult-to-machine alloys, maintaining straightness of cut. Ideal for use when the workpiece is held securely and the blade is not subjected to bending and twisting stresses. Blade cross section 13 x 0.65 mm (1/2 x 0.25in). Length: 300mm (12in)50 ;x Starrett Red Stripe HSS Hacksaw Blades 300mm (12in) x 24tpi
The Bacho SE-15 Professional Bowsaw for all types of work, especially in building, gardening, farming and forestry applications. It comes complete as a saw with a peg toothed blade, type 51 (The teeth points are high-frequency, heat-induction hardened for long-lasting performance), for cutting dry wood and is powder painted steel tube for excellent rust protection with knuckle protector offering comfort and safety.The Bahco SE-16-21 Economy Bowsaw has a pointed nose for better access in tight areas.
The ITL Insulated Armour Saw. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The Insulated Hacksaw with an injection, moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 300mm (12in). Comes with a 12in 24tpi Blade.
Irwin Jab Saw 165mm has a hardened and tempered blade with aggressive tooth design for improved cutting performance and greater removal of waste material. Sharpened tip for easy punching through drywall and a ProTouch™ soft-grip handle for durability and comfort. Blade Length: 165mm (6.1/2in).Teeth: 8 tpi.
The Knipex 98 90 Insulated Junior Hacksaw has an all-metal construction frame for added strength and durability with an easy change blade. The saw has been tested according to EN60900, resistant up to 1,000 Volts. Fitted with 150mm (6in) 25tpi blade.
The IRWIN Jack Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster cutting performance than traditional double ground saws. The blade is treated with a water based lacquer providing four times the added protection than conventional anti-rust agents. The handle is a proven design, light and strong with an ultra sonic welded soft-grip for increased hold and enhanced comfort. 90 and 45 degree angles integrated in the handle aid the user when marking out.The Jack Irwin JAK880UN20 880 Un Universal Panel Saw comes with the following specifications:Length: 500mm (20 inch)Teeth: 8 per inch
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Left Hand SawTeeth 13 tpi
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Right Hand SawTeeth 13 tpi
The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth. Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.The 244 PRC saw is ideal for precision work, with fine toothing for a perfect result. Cut: fine Blade length: 550mm (22 in) Type: Universal hardpoint 9 tpi
1 x Faithfull Countryman Wet Cut Bowsaw Blade 530mm (21in). Suitable for use with Faithfull 530mm (21in) bowsaws and most other similar sized bowsaws in the UK market.
Irwin bi-metal hacksaw blades are safer than HSS blades. They are flexible, shatter resistant and are suitable for use on a variety of metals.Pack of 2 Irwin Bi Metal Hacksaw Blades 300mm (12in) x 32tpi
DEWALT Hacksaw Blades have a bi-metal construction that combines the flexibility of a carbon steel body, with the cutting performance from the high speed steel teeth. They cut most metals including unhardened tool steel and stainless steel.This 3 Piece Pack contains: 1 x Hacksaw Blade 300mm x 18 TPI, 1 x Hacksaw Blade 300mm x 24 TPI, 1 x Hacksaw Blade 300mm x 32 TPI.
DEWALT Folding Jab Saw conveniently allows for both drywall cutting and plane cutting with one tool. The jab saw has triple ground teeth for fast cutting, cuts up to 50% faster than traditional tooth designs. The rasp is made from durable stainless steel for material removal.Fitted with an ergonomic bi-material handle for extra comfort. Both the saw and the rasp fold into the handle for compact storage. A locking mechanism locks blade in open and close positions.
The DEWALT 5-in-1 Hacksaw has a low profile which enables users to make cuts in tight spaces. High tension securely holds the blade, up to 150kg. The blade can be set to 45 or 90 degrees for standard and flush cuts. Fitted with a comfortable non-slip handle and front grip ensures positive handling and control. The hacksaw front handle can become a pistol grip jab saw. You can also attach a long reach blade to the front frame. It also features on-board blade storage.Specification:Overall Length: 300mm.
Bahco Raker Tooth Hard Point Bowsaw Blade are ideal for cutting in green wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 23-21 Raker Tooth Hard Point Bowsaw Blade 530mm (21in)
Bahco ProfCut Laminator Saw has been specially designed for cutting laminated and wooden flooring. Has a 2-component handle that provides optimum user comfort. The high-quality steel blade is taller and thicker than conventional blades and has fine XT hardpoint toothing, allowing a faster and straighter cut. Blade Length: 500mm (20in).Teeth: 11 tpi.
The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth. Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.Mixed Saw Pack Containing: 2 x 244 Hardpoint Handsaws 550mm (22in) 7tpi. 1 x 244 Hardpoint Handsaws 550mm (22in) 9tpi.
Roughneck Bow Saw with a large, thick steel frame which provides excellent strength and rigidity. It has an easy blade tensioner, and the soft grip handle with knuckle protection ensures comfortable use. 66812: Comes with an additional 300mm (12in) HSS bi-metal hacksaw blade. 66831: Comes with an additional 600mm (21in) HSS bi-metal hacksaw blade.1 x Roughneck Bowsaw 760mm (30in)
Roughneck Toolbox Saw with triple ground teeth, which are heat treated for faster cutting and a longer lasting cutting edge. With double injected soft-grip handle for comfort and hand protection, which is shaped to allow cutting at 90° and 45°. Suitable for cutting hardwood, softwood, rough timber, board sheet, worktop, floorboard, melamine and PVC. Blade Thickness: 1mm.Teeth: 10 tpi.Length: 350mm (14 inch).Teeth: 10tpi.
Roughneck Bow Saw with a large, thick steel frame which provides excellent strength and rigidity. It has an easy blade tensioner, and the soft grip handle with knuckle protection ensures comfortable use. 66812: Comes with an additional 300mm (12in) HSS bi-metal hacksaw blade. 66831: Comes with an additional 600mm (21in) HSS bi-metal hacksaw blade.1 x Roughneck Bowsaw 525mm (21in)
The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof bi-metal blades, with precision ground teeth for all kinds of metal sawing. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.These Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18tpi are supplied as a pack of 10 in a special package with a hanging loop.
The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured. Replacement blades available. Blade length: 150mm (6in).Junior Blades, virtually unbreakable in normal use.Providing an efficient way to cut metal. Packed 10 in a sleeve and 10 sleeves to a box.
Bahco ERGO™ Barracuda Blade only is a high quality general purpose blade suitable for cutting softwood, worktops, chipboard and MDF. The hardpoint sharp toothing and thicker blade offer faster cutting with improved stability and precision during use. For use with the ERGO™ handsaw handle. Blade Length: 550mm (22in).Teeth: 7 tpi.Single blade.
