John Guest Speedfit John Guest Speedfit 12mm Shut Off Valve - Ppmsv041212W
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK. Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubing
£6.99
John Guest Speedfit John Guest Speedfit Collet Locking Clip 15mm Red (Pack Of 100)
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
£19.99
John Guest Speedfit John Guest Speedfit Underfloor Heating Tile Floor Panels (Pack Of 12)
JG Underfloor Floor Panel is an underfloor heating (UFH) pipe fixing system provides high heat output and response. Suitable for 15mm pipe, it uses a simple grid system to ensure precise layout to enable minimum pipe bending radius. Ideal for new builds and extensions with a screed floor construction, especially ground floor levels. Fast and simple to install, it comes with a 11mm layer of insulation along with additional thermal insulation. Screed pipe fixing system Simple castellated grid system for precise pipe layout Enables minimum pipe bending radius 11mm layer of insulation and additional thermal insulation High heat output and response Ideal for larger regular shaped rooms Suitable for underfloor heating applications only
£240.99
John Guest Speedfit John Guest Speedfit Collet Locking Clip 15mm White - Cm1815W (Pack Of 100)
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
£19.99
John Guest Speedfit John Guest Speedfit White Plastic Service Valve 15mm X 1/2" (Pack Of 5)
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation. To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Integrated ¼ turn handle instantly isolates water Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)
£68.99
John Guest Speedfit John Guest Speedfit Stem Elbow 15mm (Pack Of 10)
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£52.99
John Guest Speedfit John Guest Speedfit to Plain Stem White 200mm 15mm x 15mm (Pack of 2) WFLX51
Connects a supply to a tap or other fixture or appliance JG Speedfit x plain stem flexi hose (white PVC) with a stem for the connection of plastic and copper pipe. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x plain stem flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)
£21.99
John Guest Speedfit John Guest Speedfit Underfloor Heating Rail 2 Metre Mounting Rail
Fixes and secures underfloor heating pipework using a mounting rail JG Underfloor mounting rail is designed for screed floor underfloor heating (UFH) applications when the insultation is too thin for staples. Suitable for new builds and extensions, especially ground floor levels, this pipe fixing method is fast and simple to install and offers high heat output and response. 15mm pipe can be easily secured to the clip rails on top of the rigid insulation sheets, which is then placed over the concrete subfloor. JG Underfloor Rail Pins should be used to fix the JG Underfloor mounting rail. Features and benefits Screed pipe fixing system 2-metre mounting rail Easily clips pipe onto the rail Ready-made pipe spacing Pre-scored at 100m intervals for easy cutting High heat output and response Ideal for large regular shaped rooms Suitable for underfloor heating applications an 15mm pipe only SPECIFICATION Brand JG Speedfit Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply) Model No JGUFHRAIL Pack Size 1 Pieces in Pack/Case 1 Product Length 2 m Product Type Clip Rail
£31.49
John Guest Speedfit John Guest Speedfit Lowfit Mounting Rail 12mm (1 Metre)
JG LowFit Mounting Rail is designed for screed floor underfloor heating (UFH) applications when the insultation is too thin for staples. Suitable for new builds and extensions, especially ground floor levels, this pipe fixing method is fast and simple to install. It is also ideal for fixing pipework close to the manifold, creating a secure and symetrical finish once installed. 12mm pipe can be easily secured to the clip rails on top of the rigid insulation sheets, which is then placed over the concrete subfloor. Screed pipe fixing system 1-meter mounting rail Easily clips pipe onto the rail Ready-made pipe spacing Pre-scored at 150mm intervals for easy cutting Suitable for underfloor heating applications and 12mm pipe only
£14.99
John Guest Speedfit John Guest Speedfit Underfloor Heating Staple 60mm (Pack 300)
JG Underfloor Pipe Staples are used to quickly and securely fix underfloor heating pipework to insulation. Suitable for screed floor applications, this method of pipe fixing is cost-effective and offers high heat output and response. The pipe staples are barbed to ensure a secure grip and are easy to install when using a JG Underfloor Staple Gun. Screed pipe fixing system Barbed staples secure pipe to insulation Ideal for regular and irregular shaped rooms Conduit required when pipework runs through adjacent rooms Suitable for underfloor heating applications only
£62.99
John Guest Speedfit John Guest Speedfit Underfloor Heatinga 240V Actuator Valve
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer. It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre. 240v circuit actuator valve Suitable for underfloor heating applications only
£44.99
John Guest Speedfit John Guest Speedfit 15mm 2 Way Divider (Pack Of 5)
John Guest push-fit acetal two way divider fitting splits supply to two equal supply feeds. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65oC max). All John Guest fittings are manufactured and assembled in the UK. Rigid and hardwearing acetal copolymer material with an EDPM O-Ring Suitable for potable liquids and intermittent hot water applications up to 65oC max (not suitable for air, pneumatic or vacuum applications) Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Compatible with LLDPE or soft metal pipe/tubing
£33.99
