The Faithfull Water Pump Attachment is designed for use with electric power drills and hose pipe. It is ideal for watering the garden from a water butt and for emptying sinks, draining paddling pools, aquariums and other small containers. Please note that this equipment is not for use with volatile or flammable liquids or liquids contaning solids. CAUTION - DO NOT RUN DRY. Specification: Max. Priming Height: 10mMax. Drill Speed: 3,400/min.Dry Running Limit: 12 SecondsMax. Capacity: 660 Litres (145 gallons)
The Batavia MAXXPUSH Caulking Gun is the perfect caulking gun for every do-it-yourselfer, who occasionally uses a caulking gun. This battery powered caulking gun only weighs 0.9 kilograms and works on 4 AA batteries (NOT supplied). Continuous high discharge pressure and automatic pressure release (anti-leak function) ensure smooth application. The built-in LED light provides a clear line of sight, even in the darkest corners and the most dimly lit environments. Suitable for all common adhesives and sealants. Compatible with all standard tubes 290-310ml. Specifications: Extrusion Speed: Max. 70mm/min.Extrusion Pressure: 150kgs.Cartridge Size: Max. 300ml.Weight: 0.9kg.
The DEWALT DCD796 XR Brushless Combi Drill has an ultra compact, lightweight design that makes it perfect for use in confined spaces. The 2 speed all metal transmission provides increased runtime and longer tool life with drill driver and hammer features for multiple applications. It offers a 15 position adjustable torque control for consistent screwdriving into a variety of materials. Intelligent trigger design allows for total control of application and it has an improved ergonomic design with rubber grip over mould. Part of the intelligent XR Lithium Ion Series for efficiency and making applications faster. DCD796P1: 1 x 18V 5.0Ah Li-Ion BatteryDCD796P2: 2 x 18V 5.0Ah Li-Ion BatteriesDCD796D2: 2 x 18V 2.0Ah Li-Ion BatteriesDCD796N: Bare Unit Specification Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel: 13mm, Masonry: 13mm, Wood: 40mmThis DEWALT DCD796N XR Brushless Combi Drill is supplied as a bare unit, NO battery or charger supplied.
The Evolution Portable Dry Wall Sander is fitted with a powerful motor, variable speed and has been specially designed for drywall applications, works up to ten times faster than conventional methods. Fitted with an integrated dust extraction system, dust is removed via eight holes at the base of the sanding plate. All the dust is drawn via the power tool eliminating the need for an additional vacuum. Simple and easy to use. The sanding disc is adjustable and the sanding plate is removable for easy use on any wall or irregular surface. Provides optimal suction power making sanding easier, reducing fatigue during work. It features a belt clip, allowing you to quickly attach a carrying strap, if required, ideal for climbing or descending ladders. A selection of sanding discs is included with a variety of grains, ideal for a superior finish for your walls. Uses hook and loop sanding discs, making it quick and easy to switch discs. A hose and dust collector bag is also provided for using the integrated dust extraction system for a safe working environment and dust. Specification Input Power: 1,050WOscillating Speed: 1,500-2,300/min.Disc Size: 225mmDust Bag Capacity: 25 LitreWeight: 2.8kg
The DEWALT DCV100 XR Compact Jobsite Blower has a compact and lightweight design that is ideal for jobsite clean-up. Variable speed slider switch with variable speed trigger and a lock-on/off switch for improved control. Supplied with inflator/deflator attachments for versatile applications. Bare Unit, No Battery or Charger Supplied. Specification Max Airflow: 80m/sec.Air Speed: 18,000/min.Weight: 1.3kg.
The Einhell TE-DH 5 SDS Plus Demolition Hammer is compact and powerful, ideal for lightweight demolition tasks during renovation and refurbishment work. The SDS Plus tool adaptor allows for quick tool change, which is compatible with SDS Plus accessories. Thanks to the vibration-damped handle, low-vibration work is possible with the demolition hammer. The adjustable additional handle also provides a firm, secure hold. A 4m long, robust rubber cable ensures maximum mobility.Equipped with a pointed chisel and a flat chisel, the TE-DH 5 demolition hammer from Einhell is ready for immediate action. Supplied in transport and storage case E-Box.Specifications: Input Power: 750W.Impact Rate: 4,300/bpm, 5 joules.Chuck: SDS Plus.Power Cord: 400cm H07RN-F.Weight 3.95kg.
The Evolution GEN2800 Evo-System Generator has been designed to use with the Evo-System EVO200 Engine. Features switchable voltages, with the flick of the switch you can choose between 110 and 240 Volt. It also features Automatic Voltage Regulation, ensuring the voltage level is always consistent and accurate. Fitted with a robust and sturdy steel frame that provides essential protection in transportation and makes it easier to carry. Ideal for a huge range of industries including: Construction, Agriculture, Automotive, Motorsport, Mobile Catering, Equestrian, Special Events and more. Specification: Constant Power @50Hz: 2.4kw / 3kVAMax Power @50Hz: 2.8kw / 3.5kVAC Output Sockets: 1 x 110V & 1 x 240VType: Self-Exciting, 2-PoleWeight: 20.1kg
The Bosch GBH 4-32 DFR Professional SDS Plus Hammeris designed for durability, featuring a very robust metal gearbox housing. Its Vibration Control enables effortless and continuous work in time intensive applications. It also features a keyless and quick-change chuck, Reverse Mode, Rotation Control Clutch, Variable Speed, and Vario-Lock. This rotary hammer is intended for drilling and chiselling in concrete, masonry, wood, and metal. It is compatible with various dust attachments. Supplied with: 1 x Auxiliary Handle, 1 x Depth Stop 310mm, 1 x Quick Change Chuck 13mm, 1 x SDS Plus Quick-change Chuck and 1 x Carrying Case. Specifications: Input Power: 900W.No Load Speed: 0-800/min.Impact Rate: 0-3,600/bpm.Impact Energy: 4.2 Joules.Drilling Capacity: Concrete, Hammer Drill Bits6-32mm,Metal13mm,Wood32mm.Weight: 4.7kg.Bosch GBH 4-32 DFR Professional SDS Plus Hammer 240V Version.
The DEWALT DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm.The DEWALT DCF887N Brushless G2 3SP Impact Driver 18 Volt is supplied as a Bare Unit NO battery or charger supplied.
TheMetabo DS 200 Plus Bench Grinder is a powerful machine, ideal for sophisticated sharpening, grinding and deburring tasks.Fitted with a low-noise and low-vibration, maintenance-free induction motor.High-quality mounting flanges provide smooth running and long tool life of the discs. The large, tilting workpiece support features practical V-groove for sharpening welding needles. It can be adjusted without the use of additional tools.The extra-large, stable spark protection glasses provide a high level of work safety. There is also a integrated LED light for optimal illumination of the working area. Supplied with: 2 x Regular Aluminium Oxide Grinding Discs 36 P and 60 N, 2 x Spark Protection Glasses, 1 x Work Piece Support and1 x Hexagonal Wrench. Specifications: Input Power: 600W. No Load Speed: 2,980/min. Grinding Wheels (Ø x thickness x bore): 200 x 25 x 32mm. Breakdown Torque: 2.7Nm. Cable Length: 1.8m. Weight: 17.5kg.
Metabo 200 Watt FMS-200 Intec Palm Tri Sander is a small lightweight machine perfect for one-handed use. It has the Intec dust filter unit to help aid dust containment. It has a very good power to weight ratio making it perfect for getting the job done quickly and professionally in those tight, awkward places. Carry case included. Specification Input Power: 200WOscillating Speed: 26,000/min.Oscillating Diameter: 1.4mmBase Plate: 100 x 147mmWeight: 1.25kg
The DEWALT USB-C POWERSTACK Starter Kit contains the following; 1 x DCB094K USB Power Delivery Charging Kit. The DEWALT DCB094K USB Power Delivery Charging Kit charges all DEWALT 18V XR and FlexVolt batteries. It has a USB-C port and output power to charge your other personal devices up to 100W. There is also a USB-A port acting as an adaptor, allowing you to charge devices up to 12W using traditional USB cords. Fitted with a belt hook for on-the-go stowing. Includes 1 x 100W USB Cord and 1 x 65W Plug. 2 x DCBP518 POWERSTACK Slide Batteries 18V 5.0Ah Li-ion. The DEWALT XR POWERSTACK Slide Battery features stacked pouch cell battery technology providing a low impedance construction, the rate of flow of electrons is much higher thanks to the innovative internal pouch battery connectors, and electrodes.The XR Slide Battery provides a greater surface area versus a traditional cylindrical battery cell type, and it also benefits from superior thermal performance, versus cylindrical batteries. This increases battery durability, and improves the cycle life and results.Works with the complete line of 18V XR tools and chargers, bringing a new lease of life and power to existing power tools.
The SCANGRIP CONNECT Smart CONNECTOR enable the use of 18V battery packs on the SCANGRIP CONNECT work lights. Whichever power tool brand such as Milwaukee tools, dewalt tools or makita tools you prefer, SCANGRIP has developed a unique CONNECTOR for each individual brand which fits 18V battery packs. Simply mount the CONNECTOR to the work light, attach your battery and you are ready to work. A BATTERY SAFETY SYSTEM protects the battery pack and makes it safe to use. Automatic discharge protection, overload protection and temperature surveillance means you can use your 18V battery pack again and again without it being damaged. Approved by TÜV Rheinland. Each CONNECTOR is sold under separate item numbers and individually designed to fit each power tool brand.The SCANGRIP CONNECT DEWALT Connector enable the use of 18V battery packs on the SCANGRIP CONNECT work lights. Whichever power tool brand you prefer, on this occasion DEWALT, SCANGRIP has developed a unique CONNECTOR for each individual brand which fits 18V battery packs. Simply mount the CONNECTOR to the work light, attach your battery and you are ready to work. A BATTERY SAFETY SYSTEM protects the battery pack and makes it safe to use. Automatic discharge protection, overload protection and temperature surveillance means you can use your 18V battery pack again and again without it being damaged. Approved by TÜV Rheinland. Each CONNECTOR is sold under separate item numbers and individually designed to fit each power tool brand, on this occasion DEWALT.
The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Bare Unit, No Battery or Charger Supplied. Specification: Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg
The Einhell TE-CB 18/180 Li-Solo Blower has a multitude of use on theconstruction site and in the workshop. Tripping hazards caused by electric cables are a thing of the past thanks to its cordless design.A powerful airflow of up to 180 km/h blows away disruptive dust and chips. Its soft grip handle reduces user fatique and is pleasant to hold. The 2 speed levels ensure application-oriented work. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This blowercomes as a Bare Unit, NO battery or charger. Supplied with three different inflation adapters thatallow for a wide range of applications. Specifications: No Load Speed: 11,500/15,500/min.Blow Velocity: 130/180 km/h.Weight: 0.9kg.
The Einhell TE-BD 750 E Bench Drill is a powerful precision tool that no tool kit should be without. Comfortable operation is ensured by the smooth-running and quiet induction motor. Its speed is infinitely adjustable and the current speed is indicated by an LCD display. Suitable for fitting all standard sizes of drill bit the quick-action chuck has a range of 1 to 16mm. In addition, the Einhell TE-BD 750 E pillar drill has an MK2 chuck for morse taper bits. Optimum conditions for all desired drilling operations are ensured by the height-adjustable drill table with tilt and swivel function, which also has width extension elements. An LED light illuminates the drill table to optimum effect. The drilling spindle with ball bearings ensures long-lasting use. Additional safety is provided by the emergency stop switch and the safety spindle protection. Specifications: Input Power: S2 750W.Speed: 450-2,500/min.Drill Bit Diameter: 1-16mm.Drilling Depth: 80mm.Projection: 152mm.Rotating Range (Drill Table): 90 degree.Weight: 44.4kg.
The Flex Power Tools ORE 3-150 EC 230/BS Random Orbit Sander has a brushless motor with greater efficiency and longer service life. The sanding speed can be adjusted to the task at hand thanks to electronic speed adjustment. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.Its ergonomic design incorporates a special balancing system for low-vibration operation. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work.The hook & loop backing pad with multi-hose system provides optimum extraction, suited to all standard 150mm diameter abrasives. It provides effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. The impact-resistant filter cartridge features an exchangeable PES filter allowing simple dust disposal or cleaning of the filter as well as maximum service life. There is also an external dust extraction Ø 27mm, adaptor SAD-C 27 AS or antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Specifications:Input Power: 400WNo Load Speed: 4,000 - 10,000/min.No Load Orbital Stroke Rate: 8,000 - 20,000/opm.Stroke: 3mmBacking Pad: Ø 150mmCable Length: 4.0mDust Extraction Connection: Ø 27mmWeight: 1.4kg
This Einhell Power-X-Change Starter Kit contains the following: 1 x 18V 2.5Ah Power X-Change Li-ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature and voltage, and even a deeply discharged battery can be charged in repair mode, which offers a long working battery life. The high-quality Li-ion battery cells provide nearly no self-discharge and the rubber-coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. 1 x Power X-Fastcharger. Charges all batteries from the Einhell Power X-Change system. 4 amp fast-charging technology ensures shorter charging times. For optimum charging and maximum safety, the battery is permanently monitored by an intelligent charging management system. A refresh mode reactivates exhaustively discharged batteries. All up-to-the-moment information is provided by the 6-stage charging level LED indicator. The body features integrated suspension eyelets to easily hang on the wall.
The Bosch GWX 18V-15 PSC Professional BITURBO Angle Grinder offers faster cutting and more metal removal than previous cordless grinders due to BITURBO Brushless technology.The PROtection switch, super-fast X-Brake, and KickBack Control provide increased and high user protection thanks to the sensor-based, mechanical, and electronic features. For more comfort, its keyless X-LOCK system makes accessory change faster, easier, and convenient. Comes as a Bare Unit, NO battery or charger. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: No Load Speed: 9,800/min.Disc Diameter: 125mm.
The Evolution EVO200 Evo-System Engine has a professional, robust and reliable design, with a recoil start. Offers superb value and ample power to the entire selection of outputs in the Evo-System range. The wheel kit provides excellent mobility, even in tough site enviroments and the manual foot brake locks the unit in to position for secure operation. Also features a folding handle and output frame for convenient storage. Specification: Engine: Evolution 4-Stroke (Single Cylinder)Engine Displacement: 200ccEngine Power: 6.5hpFuel Tank Capacity: 3.1 LitresSize:Folded & Wheels Attached (HxDxW): 520 x 600 x 540mmUnfolded & Wheels Attached (HxDxW): 805 x 600 x 690mmWeight: 29.1kg
The Batavia 12V Fast Charger charges FIXXPACK batteries. This universal power tool battery charger has a red and a green light. When the green light is on, your battery is completely charged. If the red light is on, it is not completely charged yet. Specifications: Input: 220-240V.Output: 12V.Charging Current: 2400 mA.Dimensions (L × W × H): 13.2 × 6.1 × 8.4 cm.Eeight: 0.24 kg.
The DEWALT DCS520 XR FlexVolt Plunge Saw has a brushless, heavy-duty motor which offers the same power as a mains tool. Making it perfect for plunging into wide variety of materials whilst offering consistant speed and an accurate cut under heavy loads. It features an anti-kickback system which allows the user to go about cutting tasks with no fear of injury. It will also achieve 90% extraction when fitted to an extractor and used with the closed guard, making it a perfect choice for mobile plunge cutting on site. DCS520T2: 2 x 18/54 Volt 6.0/2.0Ah XR Li-ion Batteries.DCS520N: Bare Unit, No Battery or Charger. Specification No Load Speed: 2,500-4,200/min.Depth of Cut: @90º: 59mm, @45º: 44mm.With Guide Rails: @90º: 55mm, @45º: 40mm.Blade: 165x20mm BoreBevel Capacity: 47Weight: 4.7kgThe DEWALT DCS520T2 XR FlexVolt Plunge Saw is supplied with: 2 x 18/54 Volt 6.0/2.0Ah XR Li-ion Batteries1 x DCB118 Li-Ion Charger1 x 42 Tooth Circular Saw Blade1 x T-STAK Carry Case DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The HiKOKI C7SB3 Heavy-Duty Circular Saw is fitted with a high power motor, ideal for extra heavy-duty applications. The high-tech magnesium gear case and guard reduces weight and improves strength. It has a rugged alloy base, that is easy to recalibrate and an anti-slip handle with large front grip for excellent control. There is also a spindle lock for easy disc change. Supplied with: 1 x 185mm TCT Blade, 1 x Wrench, 1 x Parallel Guide, 1 x Adaptor for Dust Collecting, 1 x Carry Case. Specification: Input Power: 1,710WNo Load Speed: 6,000/min.Max. Cutting Depth: 90° 62mm, 45° 47.5mmBlade: 185mmOverall Length: 304mmWeight: 4.3kg1 x HiKOKI C7SB3 Heavy-Duty Circular Saw 240V version.
The HiKOKI UC18YSL3 Rapid Smart Charger is suitable for slide type Li-ion batteries. It provides the industry's fastest charging time of approx. 32 minutes for 5.0Ah battery and 38 minutes for 6.0Ah battery. Cutting edge 3-way protection technology prevents battery from overcharging and overheating. It has a large charge indicator lamp with 4-colour LED status lights. Capable of a low-temperature charge, from -10°, it also has a USB port (5V, 2A) for charging small portable devices such as smart phones etc.
Metabo were one of the first companies to develop a planer thicknesser of this size. With over 20 years of experience in this field you can entrust that Metabo planer thicknessers are amongst the best in the market. The planer has a cutting width of 260 mm and total table length of 1,090 mm. Cutting depth is 3 mm max and the thicknessing height is an impressive 160 mm with a 3 mm stock removal capacity. The thicknessing bed is cast iron with the planing tables are cast aluminium. The machine comes fully equipped with three micro-switches as well as kick stop on/off switch and quick release cable for machine and operator safety. Specifcation Input Power: 2,200 Watt.No Load Speed: 6,500/min.Feed Rate: 5m/min.Chip Removal: Planing 0-3mm.Passage Height/Width: 160mm/260mm.Weight: 71kg. Dimensions (L x W x H): 1.110 x 620 x 960 mm.Dressing plates (L x W): 1.040 x 260 mm.
The Black & Decker BL Li-Ion Slide Battery Packs hold their charge in between use, meaning they do not require charging before each use and are ready to use. The Lithium Ion technology delivers the same great performance of NiCd batteries, but is lighter and more compact. Suitable for use with all Black and Decker 18 volt Li-Ion power and garden tools.The Black & Decker BL1518 Slide Battery Pack has the following specifications: Battery Capacity: 1.5Ah.Battery Chemistry: Li-Ion.Voltage: 18 Volt.
The HiKOKI G23MR Heavy-Duty Angle Grinder with a double insulated aluminium motor housing for greater strength and heat resistance. Fitted with a vibration absorbing side handle and a tool-free wheel guard. Supplied with: 1 x Wrench, 1 x Anti-Vibration Side Handle. Abrasive wheel NOT included. Specification: Input Power: 2,400WNo Load Speed: 6,600/min.Disc Diameter: 230mmSpindle: M14 x 2Arbor: 22mmWeight: 5.4kg1 x HiKOKI G23MR/J1 Heavy-Duty Angle Grinder 230mm 240V version.
Bosch GEX 34-150 Professional Random Orbital Sander with constant speed and a high removal rate, delivers efficient results even on demanding surfaces. An aluminium bearing flange ensures a long tool lifetime and makes it perfect for tough applications. For using sanding sheets with different hole pattern, the GEX 34-150 is equipped with a multi-hole sanding pad also leading to a significantly increased dust extraction. This random orbit sander is intended for sanding, in-between sanding, lacquer removal, and surface finishing on wood, veneer, lacquer, and filler, as well as mineral and acrylic surfaces. Can be used with a dust box (integrated Bosch Microfilter System) or the Bosch Click Clean System. Specifications: Input Power: 340W.No Load Speed: 4,500-12,000/min.Eccentricity:2mm.Orbit Diameter:4mm.Sanding Pad Diameter:150mm.Weight:2.1kg.
Bosch GBL 18V-120 Professional Blowerfor quick cleanup. Its air speed can reach 270 km/h, making it very powerful. The blower can be used for tidying up jobsites, cleaning drill holes, and for other versatile applications. Furthermore, its compact and balanced design makes handling easy for added control. Supplied with 4 x Accessories (Nozzle, Extension tube, Deep hole Nozzle, Dust Collection Tube). Comes as a Bare Unit, NO battery or charger. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Max Airflow: 120 m³/h.Max. Air Speed: 270 km/h.Weight: 1.1kg excl. battery.
Bosch Professional Dust Attachment for dust-free drilling. Easy to install, simply clip into place. Highly efficient when drilling vertically or horizontally. Compatible with 2-4kg and 18V or 36V Bosch SDS-Plus rotary hammers. Specification: Max. Drilling Diameter:16mm.
Metabo AS 20 M PC All-Purpose Vacuum for liquids and dry solids with commercial registration. Integrated PressClean filter cleaning allows for versatile application. Manually clean the filter using strong air flow by activating the switch on the extraction unit during breaks. Ideal for mobile use due to low weight and compact construction. It can also be used as an extractor for power tools and to clean construction sites, workshops etc. Certified in accordance with EU standard for M class dust. For added safety there is a suction stop when vacuuming liquids, once the maximum fill level is reached the vacuum automatically turns off. A warning signal also alerts to a shortfall of the minimum volume flow to protect the user. Supplied with: 1 x Quick Suction Hose (Ø 32mm, 3.2m).1 x Quick Coupling Bush Ø 28/35mm.1 x Quick Professional Handle Adaptor.3 x Plastic Suction Tubes.1 x Fleece Filter Bag.1 x Crevice Nozzle.1 x Floor Nozzle (300mm wide).1 x Suction Nozzle (120mm wide). Specifications: Voltage: 240V.Input Power: 1,200W.Capacity: Wet/Dry: 20 litres.Max. Air Flow: 4,200 L/min.Filter Surface: 3500cm².Suction Hose Diameter: 32mm.Hose Length: 3.2mCable Length: 8m.Weight: 10kg.
The Steinel HL1821S Hot Air Gun has a lightweight design for easy control. Electronically controlled, with an infinitely variable temperature setting from 80-630 degreeC in 9 steps, via an easy-to-use thumbwheel. An integrated fine dust filter protects the internal components from damage. Specification: Input Power: 1,800WHeat Settings: 300-550 degreeC in 2 stepsAirflow: 150-500 L/min.Weight: 0.80kg
