Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 4 Thor split head hammers .Face diameter 50mm (2 in)
The Stanley FatMax® Antivibe All Steel Curved Claw Hammer has a one-piece forged construction for durability and balance. With an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
Claw Hammer with a drop forged, semi-polished, heat treated steel head, a full size round face for accurate striking, and a full claw for maximum pulling power. Blue cushioned rubber grip for comfort.Weight 450g (1lb).
Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The Faithfull Welders Chipping Hammer has an all steel construction that makes it both solid and strong. It features a striking head with a sharp conical point and a flat chisel bevelled end. The unique helical barrel spring handle helps to prevent kickback and reduces resonance, helping to avoid fatigue during long periods of use. The hammer is fitted with an integral hanging hook for easy storage. Length: 290mm.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented Anti-Vibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Roughneck Gorilla V-Series Double-Ended Scutch Hammer accepts both scutch combs and chisels, making it ideal for stone and masonry dressing. Manufactured from drop-forged, hardened and tempered steel for extreme strength and durability. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 32mm (1.1/4in)
Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.108: Size 0. Weight 60g (2oz).Diameter 25mm (1in).
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.1kg (2.1/2 lb)
The Faithfull Carvers Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.
The Roughneck Gorilla V-Series Slater's Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The pick end enables holes to be punched in slates and an integrated nail puller allows nails to be removed with ease. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 2 Thor split head hammers. Face diameter: 38 mm (1 1/2 in).
Roughneck Gorilla Sledge Hammers are precision forged from high carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger than normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also feature a side striking face which is not hardened and is designed for striking wooden posts. A shock absorbing TPE grip handle is designed for maximum comfort.This Gorilla Sledge Hammer has the following specifications: Weight: 4.5kg (10lb).Length: 780mm.
Roughneck Brick Hammer manufactured from drop forged alloy steel, hardened and tempered and with a fully polished head. The tubular steel handle has a strong head to shaft connection. The ergonomically designed grip is riveted to the handle for additional safety. Unique treble injected TPR soft grip handle for comfort during use and to reduce fatigue.
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 725g (1 3/4lb).Diameter: 74mm (3 in). White Head
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 32mm (1 1/4 in).Weight 445g (1lb).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Cast iron head. Diameter 63mm (2 1/2 in).Weight 2200g (5 1/2lb).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 1Weight 710g (1 1/2lb).Diameter 32mm (1 1/4 in).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 4.Diameter: 50mm (2in).Weight: 2100g (4 1/2lb).
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 908g (2lb).
These Thor Nylon Hammers have split cast iron head with two nylon faces fastened securely to the handle with two socket head cap screws. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear, and can be rotated for even wear. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Diameter: 70mm (2 3/4 in).Weight: 3625g (7 1/2 lb).
The Estwing E3 Brick Hammers are one-piece forged, with patented Bricklayer grip. Estwing's patented grip is designed for rugged use, with super tough nylon end caps, moulded and bonded into the world famous blue shock reduction vinyl grip. Made in USA.Weight 570g (1 1/4 lb).
The Estwing E322 Straight Claw Hammer has a one-piece forged steel construction, with Estwing's world famous blue shock reduction nylon vinyl grip. Offering comfort and durability whilst reducing vibrations caused by impact. This hammer is designed for framing work with its straight claw and longer handle. Made in the USA from high quality steel.Weight 620g (1 lb 6oz)
Roughneck Mini Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection. They have shorter fibreglass handles than the traditional Sledge Hammers, which make them ideal for use in places where a large swing cannot be taken or using a full length sledge hammer is not practical. They can easily be carried in tool boxes and tool bags.Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16in Weight: 1.8kg (4lb)
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 450g (1 lb)
Thor Nylon hammers have a choice of plastic grip or wooden handles with Chrome plated Zinc heads with Nylon faces, these are fitted as standard, available in 6 different weights. Alternative faces, colour coded to distinguish hardness are also available. The faces are designed to wear and are replaceable by hand. Available in 6 sizes each with different weights, Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc. THO406 and THO408 are fitted with wooden handles while THO410, THO412, THO414 and THO416 have plastic handles.Weight 250g (1/2lb).Diameter 25mm (1 in).
Roughneck Mini Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection. They have shorter fibreglass handles than the traditional Sledge Hammers, which make them ideal for use in places where a large swing cannot be taken or using a full length sledge hammer is not practical. They can easily be carried in tool boxes and tool bags.Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16inWeight: 1.4kg (3lb)
The Stanley engineers ball pein hammers are designed with a solid graphite core shaft. These hammers offers long life and durability and have a rim tempered poll and ball pein to prevent chipping during use. The hammers also have a patented head to handle assembly for improved safety and the comfortable handle is made from a vinyl compound.Weight: 454g (1 lb).
These Estwing Ultra Series Framing Hammers are solid forged in one-piece of steel for excellent strength. They are engineered lighter to drive nails faster. They have an extra nail notch built into the head, along with a magnetic nail starter. These hammers have a traditional leather handle grip made from sole leather washers pressed on and riveted. The milled face aids gripping of the nail head when striking. Made in the USA from high-quality steel.The ESTE19SM Ultra Framing Hammer has the following specifications: Weight: 540g (19oz)Handle length: 349mm (15.1/2in).
Stanley Club Hammer with a fibreglass core for greater strength and longer durability. The shaft is covered by an ergonomic, anti-slip, bi-material handle. It has a drop forged alloy steel head with polished faces and chamfered edges. The head and handle have a reinforced connection, held by a 2-component epoxy resin adhesive.1 x Stanley Fibreglass Club Hammer 1.5kg (3.1/4lb)
