The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 300mm (12in).
The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 3mm (1/8in).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.Set of 3 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)
All in one, easy-to-use mitre box. 90° , 45° and 22.5° slots. 300mm length with a patented storage system for the saw.Comes complete with Tenon Saw. Length: 350mm
The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging. Length: 355 mm (14in).Cutter width: 50 mm (2in).
Replacement irons (blades) are available for all Stanley block and specialist planes. All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen. G : Denotes suitable for old style planes.To fit 112060 Plane 60. 1/2G.(old style) Size of Cutter 1.3/8in
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention.Set of 4.6, 12, 18 and 25mm.
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Half Round 250mm (10in)
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-265 FatMax® Thru Tang Chisel is 38mm (1 1/2 inches) in width and 165mm in length
The Faithfull traditional No.10 bench rebate plane designed for cleaning up wide rebates and shoulders or large joints and for general bench joinery, where a full width cutter is required. Suitable for use on both hard and soft woods. The high quality grey cast iron body provides both strength and stability, with a precision ground base and sides for flatness and squareness, a machined blade seating eliminates movement and blade judder. The lever cap is fitted with a brass locking screw securing the blade assembly and enables easy release for sharpening. Hardwood handle and knob for user comfort, all parts are precision machined for accurate adjustment. Cutter Width: 50mm (2in).Overall length: 330mm (13in).
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC32 Scandinavian Butt Chisel. Blade: 32mm.Overall Length: 232mm.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 6mm (1/4 inch).
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Inlcudes protective holster. Size: 16mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 22mm.
The Faithfull 7 Piece Carpenters Tool Set is supplied in a padded carry bag. All seven tools are made to the highest quality from the finest hardwood, brass and steel. Supplied in a sturdy carrying and storage case. Carpenters 7 piece kit comprising of: 1 x No.4 Plane.1 x 601/2 Block Plane.1 x Spokeshave.1 x Try Square 225mm (9in).1 x Sliding Bevel 225mm (9in).1 x Marking Knife 175mm (7in).1 x Mortice & Marking Gauge 150mm (6in).
A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90° and 45° mitre slots as well as 22.5° slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw.Comes complete with Tenon Saw (Fine Tooth). Size: 310 x 130mm Maximum depth of cut: 80mm
DEWALT Wood Chisels has a hardened, tempered chrome carbon-steel blade for edge retention. The blade has been lacquered for corrosion protection. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
4 Piece Wood Chisel Set.Contains one of each size: 6, 13, 19, 25mm (1/4, 1/2, 3/4, 1in).
The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 250mm (10in).
Faithfull Turning chisels for use on woodturning lathes. Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. Overall length: 410 mm.Length of blade: 160 mm. Roughing Out Gouge for removing large amounts of timber quickly. Can also be used to plane the surface of spindle blanks and shaped gentle curves.Size: 16 mm Roughing Out Gouge.
DEWALT Wood Chisels has a hardened, tempered chrome carbon-steel blade for edge retention. The blade has been lacquered for corrosion protection. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
6 Piece Wood Chisel Set.Contains one of each size: 6, 13, 19, 25, 32, 38mm (1/4, 1/2, 3/4, 1, 1.1/4, 1.1/2in).
The DEWALT Side Strike Chisel can be used for demolition and scraping. The hardened, tempered chrome carbon-steel blade has a serrated cutting edge. There is also a cutting edge on the side of blade for demolition work, also allows the chisel to double as a scraper. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.This 3 Piece Set contains 1 of each size: 18, 25, 32mm (3/4, 1, 1.1/4in).
The DEWALT Side Strike Chisel can be used for demolition and scraping. The hardened, tempered chrome carbon-steel blade has a serrated cutting edge. There is also a cutting edge on the side of blade for demolition work, also allows the chisel to double as a scraper. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 25mm (1 inch).
The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
Hultafors EDC Chisel 25mm and Craftsmen’s knife HVK form the perfect combination, in an easily accessible double holster, made from impact-resistant PP plastic, joined by rivets and hardwearing leather. Japanese steel blades, rust protected by Electrophoretic deposition (EPD). Fitted with heavy-duty handles designed to withstand repeated hammer blows. Specifications: Chisel: 25mm, Length: 232mm.Knife: Length: 208mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 12mm.
A No.5 size Handyman Jack plane for rapid stock removal prior to commencing assembly work. Fully adjustable for cutter alignment and depth of cut.Fine grey iron base with handle and knob in high impact polystyrene and chrome carbon steel cutters. Length: 355mm (14in).Cutter width: 50mm (2in).
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB58 bevel edged chisel is blue and has the following dimensions:Blade width: 16mm (5/8 inch)Blade length: 140mm
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge. 0.6 mm /23g.
