The Faithfull 7 Piece Carpenters Tool Set is supplied in a padded carry bag. All seven tools are made to the highest quality from the finest hardwood, brass and steel. Supplied in a sturdy carrying and storage case. Carpenters 7 piece kit comprising of: 1 x No.4 Plane.1 x 601/2 Block Plane.1 x Spokeshave.1 x Try Square 225mm (9in).1 x Sliding Bevel 225mm (9in).1 x Marking Knife 175mm (7in).1 x Mortice & Marking Gauge 150mm (6in).
A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90° and 45° mitre slots as well as 22.5° slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw.Comes complete with Tenon Saw (Fine Tooth). Size: 310 x 130mm Maximum depth of cut: 80mm
DEWALT Wood Chisels has a hardened, tempered chrome carbon-steel blade for edge retention. The blade has been lacquered for corrosion protection. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
4 Piece Wood Chisel Set.Contains one of each size: 6, 13, 19, 25mm (1/4, 1/2, 3/4, 1in).
The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
The Estwing Pro-Claw Nail Puller is made with fine tool steel, drop forged and tempered for extra durability. Both nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. The head is slightly rounded to give you improved leverage and the precision thin claw design enables you to get into hard to reach places. Fitted with a comfortable, durable vinyl grip for a strong hold in all conditions. 1 x Estwing Pro-Claw Nail Puller 250mm (10in).
Faithfull Turning chisels for use on woodturning lathes. Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. Overall length: 410 mm.Length of blade: 160 mm. Roughing Out Gouge for removing large amounts of timber quickly. Can also be used to plane the surface of spindle blanks and shaped gentle curves.Size: 16 mm Roughing Out Gouge.
DEWALT Wood Chisels has a hardened, tempered chrome carbon-steel blade for edge retention. The blade has been lacquered for corrosion protection. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
6 Piece Wood Chisel Set.Contains one of each size: 6, 13, 19, 25, 32, 38mm (1/4, 1/2, 3/4, 1, 1.1/4, 1.1/2in).
The DEWALT Side Strike Chisel can be used for demolition and scraping. The hardened, tempered chrome carbon-steel blade has a serrated cutting edge. There is also a cutting edge on the side of blade for demolition work, also allows the chisel to double as a scraper. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 25mm (1 inch).
The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
Hultafors EDC Chisel 25mm and Craftsmen’s knife HVK form the perfect combination, in an easily accessible double holster, made from impact-resistant PP plastic, joined by rivets and hardwearing leather. Japanese steel blades, rust protected by Electrophoretic deposition (EPD). Fitted with heavy-duty handles designed to withstand repeated hammer blows. Specifications: Chisel: 25mm, Length: 232mm.Knife: Length: 208mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 12mm.
A No.5 size Handyman Jack plane for rapid stock removal prior to commencing assembly work. Fully adjustable for cutter alignment and depth of cut.Fine grey iron base with handle and knob in high impact polystyrene and chrome carbon steel cutters. Length: 355mm (14in).Cutter width: 50mm (2in).
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB58 bevel edged chisel is blue and has the following dimensions:Blade width: 16mm (5/8 inch)Blade length: 140mm
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 16mm (5/8in).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 38mm (1.1/2in)
The Stanley Sweetheart 12-137 No62 Low angle Jack plane is made from extra thick 3/16in A2 steel for superior edge retention, a one-piece precision ground frog and base casting, and a limited lifetime warranty. The Stanley No. 62 is 63mm wide by 350mm long with a 50mm wide blade thats installed bevel up without a cap iron. Jack planes with bevel-up irons are among the most useful planes because they can be used in place of a jointer plane on short boards, and for smoothing. The front knob and tote are genuine American Cherry for user comfort with Norris type adjustment for ease of use and adjustable throat plate for different types of wood. A Stanley Tradition since 1843 - Stanley reintroduces their Sweet Heart logo with a new line of premium hand planes. If you're a woodworker, finding an old Stanley tool with their Sweet Heart logo is like finding a treasure, and many consider these hand planes to be the best of the best.
The Faithfull traditional double pinion hand drill with a keyless 8mm capacity chuck. The handle's end unscrews to allow storage of drill bits. Die-cast wheel and frame with plastic handles.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 32mm (1.1/4 inch).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 22mm (7/8in)
The Faithfull FAIDOWKIT10 Dowel Kit contains the following: 1 x brad point drill bit1 x drill stop collar.2 x dowel centre points.1 x hex key.10 x 8 mm fluted dowel pegs.
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB14 bevel edged chisel is blue and has the following dimensions:Blade width: 6mm (1/4 inch)Blade length: 140mm
Faithfull HSS Turning Chisels for use on woodturning lathes. Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened. Fitted with full sized contoured wood handle for user comfort and brass ferrules. Skew Chisels are a versatile tool used both in planing a smooth surface on the outside of spindles as well as cutting v-grooves and forming beads. This product is made with FSC 100% Certified Wood from well-managed forests. Specifications: Blade Width: 15mm.Length of Blade: 160mm.Overall Length: 410mm.
The Faithfull HSS Turning Chisel Spindle Gouge is used to scoop and cut deep ‘U’ grooves in spindle turning, and making holes. For use on woodturning lathes. Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened. Fitted with a full sized contoured wood handle for user comfort and brass ferrules. The handle is made with FSC 100% Certified Wood from well-managed forests.Specifications:Overall Length: 410mm.Length of Blade: 160mm.
Bahco 434 Series Bevel Edge Chisel developed according to the scientific ERGO™ process. Has a two component grip, splitproof handle allows repeated hammer blows and the blades are manufactured from hardened and tempered steel, which are precision ground for maximum sharpness and long lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with A safety guard and have rounded shoulders for added safety.6-piece set containing one of each 6, 10, 12, 18, 25 and 32mm. Supplied in a wooden storage box.
The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance. Polypropylene handle and with a protective holster includedSet contains 1 of each of 12mm, 18 mm and 25 mm bevel edge chisels.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.The Bahco 24P-S6-PP Bevel Edge Chisel Set is supplied in a high-quality polyester pouch and contains 1 of each size: 6, 10, 12, 18, 25 and 32mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 32mm.
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC20 Scandinavian Butt Chisel. Blade: 20mm.Overall Length: 232mm.
The Stanley Sweetheart chisels are based on the original 750 series socket chisels. Designed for striking and paring, the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet. It also provides a wide butt end, or large sweet spot, for striking accuracy. They have high quality EN31 carbon steel blades with narrow side bevels which flatten and sharpen quickly and give a durable cutting edge which is ideal for woodworkers. The hardwood socket handles are replaceable and require setting prior to use. These delicate looking chisels are well balanced and every bit genuine hard working chisels. Set of eight chisels, individually boxed, supplied in a suede tool roll. Sizes: 1/8in, 1/4in, 3/8in, 1/2in, 5/8in, 3/4in, 1in, 1.1/4in.
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB2 bevel edged chisel is blue and has the following dimensions:Blade width: 50mm (2 inch)Blade length: 165mm
These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW850P fluted wood dowels have the following specifications: Pack quantity: 50.Size: 40 x 8mm.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC25 Heavy-Duty Chisel 25mm
