Faithfull spokeshaves have virtually unbreakable malleable iron bodies, with the cutting blade held securely in place by a lever cap, and two retaining screws. The cutter is fully adjustable and can be finely set for delicate work. The flat spokeshave is primarily used for chamfering and cutting convex shapes in wood whereas the round spokeshave is used for cutting concave shapes. Length: 250mm (10in). Cutter Width: 54mm (2.1/8in).1 x Faithfull Spokeshave Flat.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.Size: 25mm (1 inch).
The Faithfull Bradawls are used to make pilot holes for screws in wood. Available in two versions - one with a tapered square tip (also known as a birdcage awl) for faster penetration of wood, and one with a traditional chisel tip. Fitted with comfortable soft-grip handles.The FAIBRADCP Bradawl has a chisel tip. The traditional chisel tip bores a clean hole when used with a push and twist action. Blade Length: 50mmBlade Diameter: 3mm
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention.Set of 4.6, 12, 18 and 25mm.
The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily re-sharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mm
These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.Contains: 4 x 6 mm dowel points.
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC32 Heavy-Duty Chisel 32mm
The Bahco 36 Nail puller is a compact tool for fast easy removal of nails in crates etc. The nail puller is made from high performance alloy steel with a comfortable and non-slip thermoplastic grip handle. It has a Black finish and is anti-corrosion treated. The patented internal spring keeps the jaws open and the wide striking area is able to be used as with a claw hammer.
The Faithfull bevel edged chisel range are quality tools for professional work as well as DIY users. The blue PVC handles on these chisels are impact resistant and designed for use with a mallet, or an occasional hammer blow. Each blade is manufactured from drop-forged chrome vanadium steel and is hardened and tempered to exacting standards, ensuring that the cutting edge remains sharper for longer. The bevelled edges make these chisels ideal for fine work and for cutting into tight corners. All the chisels in this range are supplied with blade guards.The Faithfull FAIWCB12 bevel edged chisel is blue and has the following dimensions:Blade width: 13mm (1/2 inch)Blade length: 140mm
Faithfull Replacement Round File Blade for use with FAIHRROUND Round Hand Rasp and similar products from other leading brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 255 x 17mm
1 X Marples M444 Series Blue Chip Bevel Edge Chisel 25mm (1in). The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.Set of 6 M373 Splitproof Bevel Edge Wood Chisels. Sizes Inculded: 6, 10, 13, 19, 25 & 32mm (1/4, 3/8, 1/2, 3/4, 1 & 1 1/4in). Comes in a wooden presentation box.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Inlcudes protective holster. Size: 24mm.
Made from high quality swedish chrome nickel steel, cold rolled, hardened and tempered with specially ground cutting edges. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc.Flat profile.Gauge: 0.8 mm /21g.
A manually adjustable general purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.Hultafors HDC25 Heavy-Duty Chisel 25mm
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length 9.1/2in.Cutter width 1.3/4in. - 45mm
The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).
The Hultafors HDC Heavy-Duty Chisel has a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all through for extreme durability and to maximise the force transmission down to the workpiece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Replaceable nylon striker available as spare part.The Hultafors Set of 4 HDC Heavy-Duty Chisels, that have a perfect ground blade, bevelled at 25° for the best ratio possible between sharpness and durability. It is forged in one piece with an I-beam going all the way through for extreme durability and to maximise the force transmission down to the work piece. The entire chisel including the handle can be positioned flat against the surface for an increased number of applications. The chisel is fitted with a santoprene handle, optimised for both power and precision. Chisels with perfect precision, sharp, heavy duty, and always close at hand. They are ready for tasks requiring extreme strength and precision. They come with a smart holster made from durable PP plastic for increased accessibility, the holster can easily be attached to a belt or on a button. Comes with one of each size: 40mm, 32mm, 25mm and 20mm. Each chisel is supplied in a ventilated ABS holster to protect the user and cutting edge during transportatoin.
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Fine Cut 250mm (10in)
The Stanley Surform® Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Half Round 250mm (10in)
A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90° and 45° mitre slots as well as 22.5° slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw.Size: 310 x 130mm Maximum depth of cut: 80mm
Roughneck Professional Bevel Edge Chisel have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety. This 3 piece Wood Chisel set is supplied in a plastic case, along with a sharpening kit. Contains the following sizes: 13mm (1/2in), 19mm (3/4in), and 25mm (1in).
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This 5 piece Wood Chisel set contains the following sizes: 6mm (1/4in), 13mm (1/2in), 19mm (3/4in), 25mm (1in), and 32mm (1.1/4in). Supplied in a handy storage wallet.
These Roughneck Professional Bevel Edge Chisels have high quality, drop forged Chrome Vanadium blades for long life performance. The bevel edge blade has two cutting angles - 25° ground angle and a pre-honed 30° angle for immediate cutting. The chisels have contoured, comfortable handles for maximum control. These handles are made from impact-resistant polypropylene with a heavy-duty end cap for repeated striking. The blade tang runs through the handle for direct transfer of striking force to the cutting edge. The chisels are supplied with a blade guard for edge protection and user safety.This set of 3 chisels contains the following sizes: 13mm (1/2in), 19mm (3/4in), and 25mm (1in).
The Faithfull FSC Straight Chisel Carving Chisel comes with a deep seated tang, metal ferrule and fully polished blade. For smooth out cuts, the skew edge style is ground at a 23 degree angle and is useful for carving in tight corners. This product is made with FSC® 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use.Specifications:Blade Width: 12.7mm (1/2in)Overall Length: 220mm
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 3mm (1/8in).
The Bailey Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seatings to reduce chatter. It also has a special cap iron design which curves shavings and prevents clogging. Cutter width: 60 mm (2.3/8in).Length: 460 mm (18in).
This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.It is ideal for end grain and general purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in.Cutter width: 1.5/8in.
A manually adjustable general purpose Block Plane. Ideal for the occasional user or DIY'er for a range of light-duty applications. Cutter Width: 40 mm (1.5/8in).Length: 180 mm (7in).
The Bahco Series 414 bevel edge chisels are a durable multi-purpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 16mm.
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Inlcudes protective holster. Size: 16mm.
