The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0300 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 76mm (3in).
The Starrett Deep Cut Bi-Metal Holesaws combine the tried and tested tooth form used on the previous Dual Pitch Holesaw, with a new tooth material for enhanced heat and wear resistance. The Deep Cut saw also features an increased hole saw depth of 51mm (2in), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2in) thick. Cutting Depth: 51mm.Starrett DCH0400 Deep Cut Bi Metal Holesaw has the following specification: Diameter: 102mm (4in).
The Starrett KFC06021 Bi-Metal Fast Cut Electrician's Holesaw Kit 1 is suitable for all tradesmen, installation engineers, industry generally and the DIY enthusiast, Starrett kits feature a range of saws with sizes selected specifically to suit the relevant application. Packed in our new sturdy EVA carrying case, these kits will be an invaluable addition to any toolbox. Contains: 6 x Holesaws: 16, 20, 25, 32, 40 & 51mm. 2 x Arbors: A1 and A10.
The BlueSpot 8 Piece Masonry Drill Bit Set is zinc plated with carbide tips for increased durability. Ideal for fast drilling of plug, anchor or clearance holes in a variety of materials including masonry, stone, concrete and brick/block. Includes handy carrying case for quick and convenient storage. Sizes: 3, 4, 5, 6, 7, 8, 9 & 10mm
Irwin 6X Blue Groove Stubby Wood Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Specifications:Diameter: 28mm.Working length: 50mm (2in).Overall length: 100mm (4in).
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 15.0mm.Total length: 230mm.Working length: 170mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 3.3mm.Working Length: 36mm.Overall Length: 65mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 24.0mm.Total length: 300mm.Working length: 240mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit.Specifications:Diameter: 4.5mm.Total length: 160mm.Working Length: 100mm.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 19.0mm.Total length: 300mm.Working length: 240mm.
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 6.5mmOverall Length: 160mmWorking Length: 100mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502817 Blue Groove 4x flat bit has the following specific dimension:Diameter: 26mm
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 10mmOverall Length: 310mmWorking Length: 250mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.Diameter: 6mm
The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The IRW10507897 Diamond Drill Bit is 12mm in diameter.
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 5mmOverall Length: 160mmWorking Length: 100mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
The Irwin Diamond tipped drill bits are suitable for fast smooth cutting in all grades of hard and soft tiles. Their raised diamond grit edge makes for easy starting in hard tile without the need for a guide. The diamond grit is tough brazed diamond which ensures fast cutting and long life. The drill bit’s reverse spiral forces water towards its cutting head, keeping the diamonds cool to increase cutting speed and prolong life. Drilling with water will further increase the lifespan of the tool. The auto slug ejection slot allows the bits to be used for continuous, uninterrupted cutting.The Irwin IRW10507900 Diamond Drill Bit 4 Piece set comprises one of each of the following diameters:5, 6, 7 and 8mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 12.0mm.Working Length: 101mm.Overall Length: 151mm.
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502781 Auger bit - long series has the following dimensions:Drillbit diameter: 30.0mmTotal length: 400mmWorking Length: 323mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502774 Auger drill bit has the following dimensions:Drillbit diameter: 24.0mmTotal length: 191mmWorking Length: 126mm
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 3.2mm.Working Length: 36mm.Overall Length: 65mm.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus Extreme 2 Drill Bit has the following dimensions: Diameter: 20mmWorking Length: 550mmOverall Length: 600mmPack Quantity: 1
The DEWALT Flat Wood Drill Bit is made from high quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hard and soft wood, chipboard and other man made materials.1 x DEWALT Flat Wood Drill Bit 16 x 160mm
The DEWALT HSS G Jobber Drill Bit is a precision ground twist drill bit for rapid drilling, long life and excellent concentricity. It has been manufactured from High Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right hand cutting, type N flute with a precision ground end at 118° point angle.This DEWALT HSS-G Jobber Drill Bit has the following specification: Diameter: 2.0mm.Length: 49mm.Working Length: 24mm.Pack Quantity: 2.
The DEWALT Flat Wood Drill Bit is made from high quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hard and soft wood, chipboard and other man made materials.1 x DEWALT Flat Wood Drill Bit 28 x 150mm
The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes. The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.The Irwin IRW10502793 Brad Point Drill Bit comes in the following: Size: 4.0 x 75mm
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11/64in.Working length: 47mm.Overall length: 80mm.
Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-36 Flat Bit 36mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 51 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 76 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-24-400 Long Flat Bit 24mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 86 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 3.5 x 70mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials.The Irwin IRW10502261 HSS Pro Drillbits comes in a bulk pack of 10. Specifications:Drillbit diameter: 3.0mmTotal length: 61mmWorking Length: 33mm
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 12.0mm.Total length: 300mm.Working length: 240mm.
