This Evolution R165CCS-Li EXT Circular Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 165 x 20mm Bore x 18T1 x Parallel Edge Guide1 x Hex Key1 x Instruction Manual
The Evolution R185CCSX Circular Track Saw is ideal for both trade and DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-20CS blade (supplied) it can cut through a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable cutting depth and 0-45 _ bevel capabilities for versatile cutting in any material. It also features channelled air flow and a vacuum extraction port, that helps to keep the cutting line visible. The electric blade brake and blade guard (that closes in 0.4 seconds) improves user safety and reduces exposure to a spinning saw blade. Supplied with 1020mm of track which is perfect for making straight cuts in long or sheet materials with ease. The saw is also compatible with the Evolution ST1400 and ST2800 tracks (sold separately). These saws have been developed to be compatible with most leading brands of circular saw tracks. Specification: Input Power: 1,600WNo Load Speed: 240V: 3,900/min., 110V: 3,700/min.Capacity: Mild Steel Plate/Box Section 3mmMax. Cutting Thickness With/Without Track: 0°: 64/59mm, 45°: 47/42mmBlade: 185 x 20mm Bore, 16TBevel Capacity: 0-45°Cable Length: 3mWeight: 5.1kg Evolution R185CCSX Circular Track Saw 185mm 110V Version
The Evolution R185CCSX Circular Track Saw is perfect for trade or DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-16CS blade (supplied) it can cut a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. Advanced safety features such as channelled air flow and vacuum extraction port help keep the cutting line visible, whilst the electric blade brake and blade guard, that closes in 0.4 seconds, reduce the time the user is exposed to a spinning saw blade. Supplied with: 1 x Multi-Material Blade 185 x 20mm Bore x 16T, 3 x 340mm Cutting Tracks, 1 x Connector Bar, 4 x Screws, 1 x Hex Key, 1 x Parallel Edge Guide, 1 x Dust Hose Connector, 1 x Instruction Manual. Specification Input Power: 1,600WNo Load Speed 240V/110V: 3,900/3,700/min.Cutting Capacities: Mild Steel Plate/Box Section: 3mmMax. Cutting Thickness:0° 64mm/59mm with track45° 47mm/42mm with trackMax. Blade Bevel Angle: 45°Blade: 185 x 20mm x 16TPower Cable Length: 3mWeight: 5.1kg Evoultion R185CCSX Circular Track Saw Kit 185mm 240V Version.
This Evolution R185CMS-Li EXT Compound Mitre Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 185 x 20mm x 20T1 x Dust Bag1 x Dust Port Adaptor1 x Top Clamp1 x Hex Key1 x Instruction Manual
The Evolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw can cut a variety of materials, such as mild steel, aluminium, wood with embedded nails, plastic, copper and more. Cuts mild steel with no heat, no burrs and virtually no sparks, leaving ready-to-weld cuts making it perfect for efficient on-site use. This invaluable tool for the home and professional workshop slices through reclaimed timber with ease and even through embedded nails, screws and staples. Dual quick-release clamps for additional accuracy and faster adjustments. Whilst the slide rail protector protects against damage and prevents dust ingress. It has a dust collection bag and a dust port adaptor for use with vacuum extraction for a cleaner working environment. The integrated carry handles make it easy to carry and transport around the workplace. Supplied with: 1 x R185TCT-20MS Multi-Material Blade, 1 x 3 Piece Hold Down Clamp, 1 x Dust Collection Bag and 1 x Dust Port Adaptor Specification: Input Power: 1,200WNo Load Speed: 3,700/min.Max. Mitre (Left/Right): 50°/50°Max. Bevel (Left/Right): 0û-45ûBlade: 185 x 20mm BoreDust Port Ø: 36mmCable Length: 3mWeight: 8.9kg Cutting Capacity: Max. Thickness Mild Steel Plate: 6mmMax. Wall Thickness Mild Steel Box Section: 3mm (50mm mild steel box section)Max. Section Wood: 210 x 56mmMin. Work Piece Size: L125 x W:30 x D:3mm Max. Cutting Angles (Width x Depth):Cross Cut (0° x 0°): 210 x 56mmBevel Cut (0° x 45°): 210 x 38mmMitre Cut (45° x 0°): 145 x 56mm Compound Cut (45° x 45°): 145 x 38mmEvolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw 240V Version
This Evolution R185SMS-Li EXT Sliding Mitre Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 185 x 20mm Bore x 20T1 x Dust Bag1 x Dust Port Adaptor1 x Top Clamp1 x Hex Key1 x Instruction Manual
This Evolution R18BAT-Li2 EXT Battery has the following specification: Amperage: 2.0AhVoltage: 18VChemistry: Li-ionNumber of Cells: 5Weight: 440gCharge Time: 30 min.
This Evolution R18BAT-Li5 EXT Battery has 25% higher capacity cells than the 4Ah model to deliver even longer run times, and is perfectly suited to powering Evolution Multi-Material cutting saws. Delivers up to 50 more cuts* per charge Vs Evolution 4Ah EXT battery. *Based on internal cut testing. Specification: Amperage: 5.0AhVoltage: 18VChemistry: Li-ionNumber of Cells: 10Weight: 720gCharge Time: 60 min.
The Evolution R18RCH-Li1 Single Dock Rapid Charger is a smart, ultra quick lithium-ion battery charger that is designed to maximise productivity and keep you working all day long. It will fully charge a 2.0Ah battery in just 30 minutes, and a 5.0Ah battery in just 60 minutes. Compatible with all Evolution EXT li-ion batteries, this charger uses intelligent battery management to monitor cell temperature and health for extended battery life. It has a lightweight and compact design with a long cable makes it easy to transport use around site. Voltage: 18VBattery Chemistry: Li-ion
The Evolution R18RCH-Li2 Double Dock Rapid Charger is a twin port, ultra quick lithium-ion battery charger that is designed to maximise your productivity and keep you working all day long. Packed with two internal charging circuits, the charger allows two batteries at the same time while maintaining the rapid charge times of the single dock charger. It will fully charge a 2.0Ah battery in just 30 minutes, and a 5.0Ah battery in just 60 minutes. Compatible with all Evolution EXT li-ion batteries, this charger uses intelligent battery management to monitor cell temperature and health for extended battery life. Lightweight and compact design with a long cable makes it easy to transport use around site. Voltage: 18VBattery Chemistry: Li-ion
The Evolution R230RCP Multi-Material Reciprocating Saw has been designed to cut a wide range of materials from green wood to metal. Comes fitted with an ergonomic, soft grip, 180û rotating handle for maximum control and versatility without having to adjust the blade. Fully tool-less blade changes and adjustments for quick and easy use. The LED light improves visibility and precision for accurate work in low-light conditions, whilst the 3m cable length gives freedom within the workspace. Supplied with 4 single-purpose blades for the dedicated cutting of thin steel, green wood and general wood, along with a multi-material blade to increase productivity, allowing you to cut through a range of materials including plastic, copper, wood and metal. Specification: Input Power: 850WNo Load Speed: 0-2,400/min.Stroke Length: 28mmRear Handle Rotation: 180°Weight: 3.2kg
The Evolution RAGE7-S Corded Jigsaw is powerful and versatile and is capable of cutting many different materials. Its variable speed trigger increases user control and ease of operation. An ergonomic, soft-grip handle gives superb operator comfort and control. Supplied with an adjustable parallel edge guide, which acts as a useful aid when cutting and trimming laminate flooring, where accurate parallel cuts are often needed. The jigsaw also has an adjustable footplate (up to 45° right and left) which allow bevel cutting. Positive stops are provided at 45°, 30° and 15° both left and right and at 0°. Fitted with a quick-release, tool-less chuck for quick and easy blade change. It is also equipped with an air blower to blow dust away from the blade and the working area, allowing cutting lines to be kept clear and readily visible. The supplied adaptor tube allows connection to a vacuum cleaner Supplied with a multipurpose blade which is capable of cutting steel, aluminium, wood and plastics. Specification Input Power: 710WStrokes at No Load: 0-3,000/min.Bevel Capacity: 45°Capacity: Metal: 8mm, Wood: 80mmWeight: 4.1kg
The Batavia MAXXPACK 2 Mode SDS Drill has been developed to cope with heavier drilling applications which are normally associated with a mains powered machine. It has 2 modes: normal drilling and hammer drilling and takes SDS Plus drill bits. The front handle provides additional stability during use and the soft grip rear handle has knuckle protection. 2 variable speeds allow you to drill into a wide variety of materials. Comes as a Bare Unit, No Battery or Charger. Specification: Tool Holder: SDS PlusNo Load Speed: 0–300/0–1,000/min.Impact Rate: 0-5,000/bpmImpact Energy: 0.8 JoulesCapacity: Wood: 20mm, Metal: 10mm, Concrete: 20mm
