The Faithfull Water Pump Attachment is designed for use with electric power drills and hose pipe. It is ideal for watering the garden from a water butt and for emptying sinks, draining paddling pools, aquariums and other small containers. Please note that this equipment is not for use with volatile or flammable liquids or liquids contaning solids. CAUTION - DO NOT RUN DRY. Specification: Max. Priming Height: 10mMax. Drill Speed: 3,400/min.Dry Running Limit: 12 SecondsMax. Capacity: 660 Litres (145 gallons)
The DEWALT DCD796 XR Brushless Combi Drill has an ultra compact, lightweight design that makes it perfect for use in confined spaces. The 2 speed all metal transmission provides increased runtime and longer tool life with drill driver and hammer features for multiple applications. It offers a 15 position adjustable torque control for consistent screwdriving into a variety of materials. Intelligent trigger design allows for total control of application and it has an improved ergonomic design with rubber grip over mould. Part of the intelligent XR Lithium Ion Series for efficiency and making applications faster. DCD796P1: 1 x 18V 5.0Ah Li-Ion BatteryDCD796P2: 2 x 18V 5.0Ah Li-Ion BatteriesDCD796D2: 2 x 18V 2.0Ah Li-Ion BatteriesDCD796N: Bare Unit Specification Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel: 13mm, Masonry: 13mm, Wood: 40mmThis DEWALT DCD796N XR Brushless Combi Drill is supplied as a bare unit, NO battery or charger supplied.
The Evolution Portable Dry Wall Sander is fitted with a powerful motor, variable speed and has been specially designed for drywall applications, works up to ten times faster than conventional methods. Fitted with an integrated dust extraction system, dust is removed via eight holes at the base of the sanding plate. All the dust is drawn via the power tool eliminating the need for an additional vacuum. Simple and easy to use. The sanding disc is adjustable and the sanding plate is removable for easy use on any wall or irregular surface. Provides optimal suction power making sanding easier, reducing fatigue during work. It features a belt clip, allowing you to quickly attach a carrying strap, if required, ideal for climbing or descending ladders. A selection of sanding discs is included with a variety of grains, ideal for a superior finish for your walls. Uses hook and loop sanding discs, making it quick and easy to switch discs. A hose and dust collector bag is also provided for using the integrated dust extraction system for a safe working environment and dust. Specification Input Power: 1,050WOscillating Speed: 1,500-2,300/min.Disc Size: 225mmDust Bag Capacity: 25 LitreWeight: 2.8kg
The DEWALT DCV100 XR Compact Jobsite Blower has a compact and lightweight design that is ideal for jobsite clean-up. Variable speed slider switch with variable speed trigger and a lock-on/off switch for improved control. Supplied with inflator/deflator attachments for versatile applications. Bare Unit, No Battery or Charger Supplied. Specification Max Airflow: 80m/sec.Air Speed: 18,000/min.Weight: 1.3kg.
The Metabo KGS 216 MN Sliding Mitre Saw has a die-cast aluminium work bench and a sliding function for wide work pieces. It is ideal for sawing wood, coated panels and plastics. It has a freely adjustable table extension on both sides with a practical support surface and integrated crosscut fence. Its non-slip rubber surface on its handle and upper carry handle ensures excellent grip, and the saw also has lateral handles. For working in poorly lit areas, the mitre saw has an integrated working light. For accurate cutting, the saw has a laser for exact display of the cut, and all scales are visible from the working position. In addition the turntable allows precise angle adjustment, and it has integrated cutting depth control. To ensure safety, the Metabo KGS 216 MN Sliding Mitre Saw has a transport lock and a cable winder. The saw is also supplied with a chip collection bag to ensure clean air at the work place. The saw blade is easy to change, and the machine is supplied with a tool for this. Specification Input Power: 1,500WNo Load Speed: 3,750/min.Blade: 216 x 30mm BoreSaw Blade Tilt Left/Right: 47°/2°Capacity: Straight Cut 90°/90°: 305x65mmDouble Mitre 45°/45°: 205x36mmWeight: 13.5kgMetabo KGS-216MN 216mm Sliding Mitre Saw 1500W 110V Version.
The Einhell TE-RS 40 E Random Orbital Sander is a solid, powerful tool for sanding jobs involving wood, plastic and metal. Electronic speed control allows the sander to be adapted to the set task and is perfectly suited for high abrasive sanding and fine-tuning tasks. It is quick and easy to change sanding pads thanks to the micro hook & loop backing. The sander is fitted with an active dust-extraction system for a cleaner working area. It is collected in the attached filterbox, but for maximum dust extraction you can attach a vacuum cleaner instead. Ergonomic soft grip areas and a low vibration design with solid aluminium balancing provide increased, comfortable work time. There is also an additional, removable handle for increased balance and comfort. Specification Input Power: 400WOscillating Speed: 12,000-24,000/min. Oscillating Diameter: 2.5mmSanding Pad Size: 125mm.Weight: 2.10kg
The Bosch GBH 4-32 DFR Professional SDS Plus Hammeris designed for durability, featuring a very robust metal gearbox housing. Its Vibration Control enables effortless and continuous work in time intensive applications. It also features a keyless and quick-change chuck, Reverse Mode, Rotation Control Clutch, Variable Speed, and Vario-Lock. This rotary hammer is intended for drilling and chiselling in concrete, masonry, wood, and metal. It is compatible with various dust attachments. Supplied with: 1 x Auxiliary Handle, 1 x Depth Stop 310mm, 1 x Quick Change Chuck 13mm, 1 x SDS Plus Quick-change Chuck and 1 x Carrying Case. Specifications: Input Power: 900W.No Load Speed: 0-800/min.Impact Rate: 0-3,600/bpm.Impact Energy: 4.2 Joules.Drilling Capacity: Concrete, Hammer Drill Bits6-32mm,Metal13mm,Wood32mm.Weight: 4.7kg.Bosch GBH 4-32 DFR Professional SDS Plus Hammer 240V Version.
The DEWALT DW305PK Reciprocating Saw is fitted with a motor that has been specifically designed for heavy-duty applications, a 4 position blade clamp allows for flush cutting and increased versatility. It has a 29mm stroke length, the DWE305PK delivers excellent cutting performance. There is a lever-action keyless blade clamp for quick and easy blade changing. The saw is ideal for plumbers, electricians, heating, HVAC , and builders. Supplied with a heavy-duty carrying case. Specification Input Power: 1,100 Watt.No Load Speed: 0-2,800/min. Stroke Length: 29mm.Capacity: Wood: 280mm, Steel Sections & Pipes: 100mm, PVC: 130mm.Length: 435mm.Height: 178mm.Weight: 3.5kg.The DEWALT DW305PK Reciprocating Saw 1100W 240 Volt Version.
The SCANGRIP CONNECT Smart CONNECTOR enable the use of 18V battery packs on the SCANGRIP CONNECT work lights. Whichever power tool brand such as Milwaukee tools, dewalt tools or makita tools you prefer, SCANGRIP has developed a unique CONNECTOR for each individual brand which fits 18V battery packs. Simply mount the CONNECTOR to the work light, attach your battery and you are ready to work. A BATTERY SAFETY SYSTEM protects the battery pack and makes it safe to use. Automatic discharge protection, overload protection and temperature surveillance means you can use your 18V battery pack again and again without it being damaged. Approved by TÜV Rheinland. Each CONNECTOR is sold under separate item numbers and individually designed to fit each power tool brand.The SCANGRIP CONNECT DEWALT Connector enable the use of 18V battery packs on the SCANGRIP CONNECT work lights. Whichever power tool brand you prefer, on this occasion DEWALT, SCANGRIP has developed a unique CONNECTOR for each individual brand which fits 18V battery packs. Simply mount the CONNECTOR to the work light, attach your battery and you are ready to work. A BATTERY SAFETY SYSTEM protects the battery pack and makes it safe to use. Automatic discharge protection, overload protection and temperature surveillance means you can use your 18V battery pack again and again without it being damaged. Approved by TÜV Rheinland. Each CONNECTOR is sold under separate item numbers and individually designed to fit each power tool brand, on this occasion DEWALT.
The DEWALT DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design that is very comfortable to use and fits in small spaces. The 3 LED, Halo light ring offers excellent work piece lighting. Specification Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm.The DEWALT DCF887N Brushless G2 3SP Impact Driver 18 Volt is supplied as a Bare Unit NO battery or charger supplied.
Metabo ASA 20 L PC All-Purpose Vacuum for liquids and dry solids with commercial registration. Integrated PressClean filter cleaning allows for versatile application. Manually clean the filter using strong air flow by activating the switch on the extraction unit during breaks. Ideal for mobile use due to low weight and compact construction. It can be used as an extractor for power tools and to clean construction sites, workshops etc. Fitted with a power socket for a power tool use. The vacuum will automatically start/shut down when attached to a power tool. Certified in accordance with EU standard for L class dust. For added safety there is a suction stop when vacuuming liquids, once the maximum fill level is reached the vacuum automatically turns off. An automatic trailing mechanism empties the suction hose completely. Supplied with: 1 x Quick Suction Hose (Ø 32mm, 3.2m).1 x Quick Coupling Bush Ø 28/35mm.1 x Quick Professional Handle Adaptor.3 x Plastic Suction Tubes.1 x Fleece Filter Bag.1 x Crevice Nozzle.1 x Floor Nozzle (300mm wide).1 x Suction Nozzle (120mm wide). Specifications: Voltage: 240V.Input Power: 1,200W.Capacity: Wet/Dry: 20 litres.Max. Air Flow: 4,200 L/min.Filter Surface: 3500cm².Suction Hose Diameter: 32mm.Hose Length: 3.2mCable Length: 5.5m.Weight: 10kg.
The Evolution GEN2800 Evo-System Generator has been designed to use with the Evo-System EVO200 Engine. Features switchable voltages, with the flick of the switch you can choose between 110 and 240 Volt. It also features Automatic Voltage Regulation, ensuring the voltage level is always consistent and accurate. Fitted with a robust and sturdy steel frame that provides essential protection in transportation and makes it easier to carry. Ideal for a huge range of industries including: Construction, Agriculture, Automotive, Motorsport, Mobile Catering, Equestrian, Special Events and more. Specification: Constant Power @50Hz: 2.4kw / 3kVAMax Power @50Hz: 2.8kw / 3.5kVAC Output Sockets: 1 x 110V & 1 x 240VType: Self-Exciting, 2-PoleWeight: 20.1kg
TheMetabo DS 200 Plus Bench Grinder is a powerful machine, ideal for sophisticated sharpening, grinding and deburring tasks.Fitted with a low-noise and low-vibration, maintenance-free induction motor.High-quality mounting flanges provide smooth running and long tool life of the discs. The large, tilting workpiece support features practical V-groove for sharpening welding needles. It can be adjusted without the use of additional tools.The extra-large, stable spark protection glasses provide a high level of work safety. There is also a integrated LED light for optimal illumination of the working area. Supplied with: 2 x Regular Aluminium Oxide Grinding Discs 36 P and 60 N, 2 x Spark Protection Glasses, 1 x Work Piece Support and1 x Hexagonal Wrench. Specifications: Input Power: 600W. No Load Speed: 2,980/min. Grinding Wheels (Ø x thickness x bore): 200 x 25 x 32mm. Breakdown Torque: 2.7Nm. Cable Length: 1.8m. Weight: 17.5kg.
Metabo 200 Watt FMS-200 Intec Palm Tri Sander is a small lightweight machine perfect for one-handed use. It has the Intec dust filter unit to help aid dust containment. It has a very good power to weight ratio making it perfect for getting the job done quickly and professionally in those tight, awkward places. Carry case included. Specification Input Power: 200WOscillating Speed: 26,000/min.Oscillating Diameter: 1.4mmBase Plate: 100 x 147mmWeight: 1.25kg
The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Bare Unit, No Battery or Charger Supplied. Specification: Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg
The Einhell TE-BD 750 E Bench Drill is a powerful precision tool that no tool kit should be without. Comfortable operation is ensured by the smooth-running and quiet induction motor. Its speed is infinitely adjustable and the current speed is indicated by an LCD display. Suitable for fitting all standard sizes of drill bit the quick-action chuck has a range of 1 to 16mm. In addition, the Einhell TE-BD 750 E pillar drill has an MK2 chuck for morse taper bits. Optimum conditions for all desired drilling operations are ensured by the height-adjustable drill table with tilt and swivel function, which also has width extension elements. An LED light illuminates the drill table to optimum effect. The drilling spindle with ball bearings ensures long-lasting use. Additional safety is provided by the emergency stop switch and the safety spindle protection. Specifications: Input Power: S2 750W.Speed: 450-2,500/min.Drill Bit Diameter: 1-16mm.Drilling Depth: 80mm.Projection: 152mm.Rotating Range (Drill Table): 90 degree.Weight: 44.4kg.
The Flex Power Tools ORE 3-150 EC 230/BS Random Orbit Sander has a brushless motor with greater efficiency and longer service life. The sanding speed can be adjusted to the task at hand thanks to electronic speed adjustment. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.Its ergonomic design incorporates a special balancing system for low-vibration operation. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work.The hook & loop backing pad with multi-hose system provides optimum extraction, suited to all standard 150mm diameter abrasives. It provides effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. The impact-resistant filter cartridge features an exchangeable PES filter allowing simple dust disposal or cleaning of the filter as well as maximum service life. There is also an external dust extraction Ø 27mm, adaptor SAD-C 27 AS or antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Specifications:Input Power: 400WNo Load Speed: 4,000 - 10,000/min.No Load Orbital Stroke Rate: 8,000 - 20,000/opm.Stroke: 3mmBacking Pad: Ø 150mmCable Length: 4.0mDust Extraction Connection: Ø 27mmWeight: 1.4kg
This Einhell Power-X-Change Starter Kit contains the following: 1 x 18V 2.5Ah Power X-Change Li-ion Battery that features a 7-in-1 ABS: Active Battery Management System and a 3-Step LED battery control. The microprocessor controls key parameters like temperature and voltage, and even a deeply discharged battery can be charged in repair mode, which offers a long working battery life. The high-quality Li-ion battery cells provide nearly no self-discharge and the rubber-coated housing gives high impact protection and a high grip. It also has a recessed grip that ensures good ergonomic handling. 1 x Power X-Fastcharger. Charges all batteries from the Einhell Power X-Change system. 4 amp fast-charging technology ensures shorter charging times. For optimum charging and maximum safety, the battery is permanently monitored by an intelligent charging management system. A refresh mode reactivates exhaustively discharged batteries. All up-to-the-moment information is provided by the 6-stage charging level LED indicator. The body features integrated suspension eyelets to easily hang on the wall.
The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Complete with: 1 x Delta Sanding Disk, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood, 1 x Hex Key and 1 x Storage Case. Specification Input Power: 200 Watt.Oscillating Speed: 30,000-42,000/min.Oscillating Angle: 3°.Sandpaper Size: 93 x 93 x 93mm.Weight: 1.0kg.
The Evolution EVO200 Evo-System Engine has a professional, robust and reliable design, with a recoil start. Offers superb value and ample power to the entire selection of outputs in the Evo-System range. The wheel kit provides excellent mobility, even in tough site enviroments and the manual foot brake locks the unit in to position for secure operation. Also features a folding handle and output frame for convenient storage. Specification: Engine: Evolution 4-Stroke (Single Cylinder)Engine Displacement: 200ccEngine Power: 6.5hpFuel Tank Capacity: 3.1 LitresSize:Folded & Wheels Attached (HxDxW): 520 x 600 x 540mmUnfolded & Wheels Attached (HxDxW): 805 x 600 x 690mmWeight: 29.1kg
The Einhell TE-CS 18/165-1 Li-Solo Power X-Change Circular Saw is compact, lightweight and easy to work with. The cutting depth and tilt angle can be adjusted quickly and easily without any tools. A spindle lock makes it easy to swap saw blades with a 20mm bore. High-quality LEDs give you a clear view and a dust vacuum attachment keeps the work area clean. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 4,200/min.Cutting Depth: @90 degree 54mm, @45 degree 35mmSaw Blade: Ø165 x 20mm boreWeight 2.6kg (without battery)
Einhell Power X-Change Multi-Ah Battery features high-quality Li-ion cells with no memory effect, low self-discharge and high, constant power. This cell technology delivers 100% more power for maximum performance. With Multi-Ah technology: 6Ah for maximum charge level or 4Ah to protect the battery for 3x longer total lifetime. The charge level is precisely indicated as a % on the digital display. PLUS-technology provides increased power for intensive operation. The ABS process-controlled battery management system stands for maximum safety, optimum performance, operating time and lifetime. Covered with a rubber-coated housing that provides increased impact protection and protects against dust, corrosion and mechanical damage. Compatible with all Power X-Change chargers, machines and for twin battery use in demanding 36V power applications.
The Einhell TE-CD 18/44 Li-i Power X-Change Combi Drill is a versatile all-rounder for any DIY enthusiast. Its rugged 2-speed transmission delivers up to 44Nm of torque and is suitable for powerful drilling and screwing tasks. Speed electronics, 21 torque settings conventional and percussion drilling modes ensure the tool can be matched to the material and task at hand.The integrated percussion drilling feature means the power tool can also drill into harder materials such as brick and stone. However, the torque adjustment also allows the tool to deliver lower speeds for screwing and drilling into softer materials if required. Screwdriver and drill bits can be installed in the single-sleeve, 13mm quick-action chuck in a matter of seconds.Fitted ergonomic handle with softgrip inserts, ensures a comfortable grip even for more time-consuming jobs. It also feature an integrated LED light and a belt clip so it can be kept within quick and easy reach between uses.Supplied with: 1 x 18V 2.5Ah Li-ion Battery and 1 x Charger.Specifications:Chuck: 13mmNo Load Speed: 0-400/0-1,500/min.Impact Rate: 6,400/24,000/bpmMax. Torque: 44Nm, 21 SettingsWeight: 1.59kg
The Einhell TC-SS 406 E Scroll Saw is the perfect tool for model making and intricate sawing jobs. The model saw works with 120 watts of power and a maximum cutting height of 50mm. The performance and speed can be optimally adapted to the respective material with the help of speed regulation. The solid frame ensures a secure stand, while the 12.15kg saw is also suitable for flexible, mobile use thanks to its compact design.Thanks to the robust steel work table, which can be tilted up to 47°, even angled cuts can be carried out quickly and easily. The practical workpiece holder ensures safe and precise guidance of the workpiece to be sawed and holds it reliably on the saw table. With the clamping device, the saw blades can be changed quickly and easily. Both cross pin and circular saw blades are suitable for use with the scroll saw. The integrated blower ensures a clear view of the working area and thus facilitates the execution of precise cuts. Thanks to the connection for dust extraction (36mm diameter), the workplace can be kept clean effortlessly, for example, with the help of an Einhell wet/dry vacuum cleaner. For stationary operation, the scroll saw can also be screwed to a workbench. Supplied with: 2 x Saw BladesSpecifications:Cutting Height: 50mmSuction Adapter Diameter: 36mmTable Inclination Left/Right: 47°/2°Weight: 9.3kg
The Einhell TE-DH 12 SDS Max Demolition Hammer is equipped with a rugged SDS-max tool chuck. The ideal helper for really tough jobs when performing home construction work such as demolishing parts of walls or tearing out floor and wall coverings.For low-vibration operation it has a vibration-absorbing handle and an adjustable additional handle. In spite of its impact force this tool is also easy to handle and, thanks to the extra-long and robust rubber cable, is also highly versatile. Equipped with a pointed chisel and a flat chisel, the TE-DH 12 demolition hammer from Einhell is ready for immediate action. Supplied in transport and storage case E-Box.Specifications: Input Power: 1,050W.Impact Rate: 4,100/bpm, 12 joules.Chuck: SDS Max.Power Cord: 400cm H07RN-F.Weight 6.75kg.
The Makita DMR116 Job Site Radio comes with easy to read digital tuner and LCD display. Runs on both an AC adaptor and Makita Li-ion batteries. Its compact and lightweight design incorporates a carry handle for easy transportation. IP64 rated for water and dust resistance, suitable usage on job sites. There is also an AUX input. Compatible with all Makita 14.4-18V Li-ion batteries and 14.4V/18V G-batteries. Comes as a Bare Unit, No Battery or Charger. Specifications: Frequency Range: AM 522 - 1710 kHz, FM 87.5 - 108 MHz.Battery: Type Lithium-ion, Range 14.4-18V.Weight: 4.1kg.
The Makita DJR187RTE Brushless LXT Reciprocating Saw is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x DC18RC Fast Charger2 x 152mm Reciprocating Saw Blades (6TPI and 18TPI)1 x Carry Case
The Metabo ASA 30 M PC All-Purpose Vacuum built for liquids and dry solids with commercial registration. Integrated PressClean filter cleaning allows for versatile application. Manually clean the filter using strong air flow by activating the switch on the extraction unit during breaks. Ideal for mobile use due to low weight and compact construction. It can also be used as an extractor for power tools and to clean construction sites, workshops etc. Fitted with a power socket for a power tool use. The vacuum will automatically start/shut down when attached to a power tool. Certified in accordance with EU standard for M class dust. For added safety there is a suction stop when vacuuming liquids, once the maximum fill level is reached the vacuum automatically turns off. An automatic trailing mechanism empties the suction hose completely. There is also a warning signal on shortfall of the minimum volume flow to protect the user. Easy transport thanks to cable and hose bracket as well as having a case for pipes and nozzles. You can also attach metaBOXes to the vacuum cleaner for easy change of location. Supplied with: 1 x Quick Antistatic Suction Hose (Ø 32mm, 4m).1 x Quick Coupling Bush Ø 28/35mm.1 x Quick Coupling Bush Ø 40/45mm.1 x Quick Premium Handle Adaptor.3 x Chrome-plated Suction Tubes.1 x Fleece Filter Bag.1 x Crevice Nozzle.1 x Floor Nozzle (360mm wide).1 x Suction Nozzle (120mm wide).1 x Brush Nozzle.1 x PE Disposal Bag. Specifications: Input Power: 1,200W.Capacity: Wet/Dry: 30 litres.Max. Air Flow: 4,200 L/min.Filter Surface: 3500cm².Suction Hose Diameter: 32mm.Hose Length: 4m.Cable Length: 8m.Weight: 10.8kg. 1 x Metabo ASA 30 M PC All-Purpose Vacuum with Power Tool Take Off 30 litre 240V Version.
The HiKOKI UC18YSL3 Rapid Smart Charger is suitable for slide type Li-ion batteries. It provides the industry's fastest charging time of approx. 32 minutes for 5.0Ah battery and 38 minutes for 6.0Ah battery. Cutting edge 3-way protection technology prevents battery from overcharging and overheating. It has a large charge indicator lamp with 4-colour LED status lights. Capable of a low-temperature charge, from -10°, it also has a USB port (5V, 2A) for charging small portable devices such as smart phones etc.
The Makita DGA513 125mm Grinder is fitted with a brushless motor and has a feature that lets the user adjust the torque and speed according to the load condition. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for an optimum operation. There is also a variable speed control dial, lock-on function and an electronic current limiter for overload protection. The body of the grinder is covered with an ergonomic soft grip for increased comfort and control. There are a number of safety features on this model, including: an anti-restart function, electric brake and Active Feedback Sensing Technology (AFT) that shuts down the tool to protect the user if the rotation speed suddenly slows down. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Disc Diameter: 125mmMax. Wheel Thickness: 7.2mmBore Diameter: 22.23mmWeight: 2.4kg
The DEWALT DCS353 XR Brushless Multi-Tool has a dual-grip variable speed trigger, with a lock-on feature that allows greater control when cutting/scraping/sanding. A quick-change accessory system allows blades and attachments to be changed quickly. Its universal accessory adaptor enables use with most oscillating tool accessory brands. The compact, lightweight design allows improved access into confined spaces. Fitted with an airlock compatible dust adaptor for quicker/more secure dust extraction connection/performance. There is also a bright LED light that illuminates dark work surfaces for accurate cutting. Specification: No Load Speed: 0-18,000/min.Oscillation Angle: 1.6 degreeWeight: 0.86kg (without battery)The DEWALT DCS353N XR Brushless Multi-Tool is supplied as a Bare Unit - No Battery or Charger.
The DEWALT DCD703L2T XR Multi-head Drill Driver has a brushless motor for efficient performance and run time. Its compact, lightweight design incorporates an ergonomic grip handle. Supplied with 4 different heads: Off Set head allows the user to get into very tight areas, Right Angle head, Traditional Chuck for day-to-day drilling and a Drop & Load Screwdriver head. Specification: No Load Speed: 1,500/min.Max. Torque: 57.5NmCapacity: Wood 20mm, Metal 10mmWeight: 0.7kg
