The Makita DCM501 Cordless Coffee Maker is compatible with 60mm coffee pods as well as ground coffee. Its boil dry protection function prevents the machine from burning out: if water empties and temperature inside increases, the sensor will turn off power supply automatically. The body features battery ports for LXT and CXT batteries and comes with a protection cover for empty battery terminal. There is also a carry handle for easy transport. Supplied with a dedicated 240ml cup that has been designed to fit in the machine without leaving a gap, which protects against splash and dirt entry. Commercial cups up to 90mm height will also fit the machine. Bare Unit, No Battery or Charger. Specification: Voltage: 10.8-18VBrew Capacity: Single CXT Battery: 260ml, Single 14.4V Battery (3.0Ah): 260ml, 18V Battery: 3.0Ah: 320ml, 6.0Ah: 640mlBrew Time (160ml): CXT: 7 min., 14.4/18V: 5 min.Compatible Coffee Pod: 60mm typeWeight: 2.2kg
Makita DHS782 Brushless LXT Circular Saw with Automatic Torque Drive Technology that automatically changes the cutting speed according to load condition for optimum operation. Its magnesium die-cast base plate provides increased durability. Fitted with an ergonomic soft grip. For added user safety there is an overload warning lamp, soft start feature and an electric brake. It also features a positive stop at the 45° bevel angle and an LED job light. Supplied with 1 x Type 4 MAKPAC Connector Case. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed; 6,000/min.Blade: 190 x 20/30mm BoreMax. Cut: @0° 62.5mm, @45° 44.5mm, @48° 42mmWeight: 4.5kg36v (18v x 2)
The Evolution DWP1000 Evo-System Dirty Water Pump has been designed to use with the Evo-System EVO200 Engine. It has a robust, potable design that is protected by a sturdy steel frame, which also enhances the pump's portability. Features a 3in (75mm) diameter inlet and outlet ports, it pumps up to 1000 litres of water per minute. The perfect solution when you need to move water quickly and efficiently. Supplied with an inlet filter which helps prevent unwanted debris from entering the pump. Specification: Flow Rate: 1000l/min.Max. Solids: 8mmInlet & Output Diameter (Inlet Filter): 75mmPump Lift: 28mSuction Height: 8mDimensions (H x D x W): 395 x 345 x 300mmWeight: 10.7kg
The Evolution F210SMS Multi-Material Sliding Mitre Saw utilises patented Evolution multipurpose cutting technology and will cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. Laser guidance provides optimum accuracy and the robust outer casing enhances durability. The F210SMS Mitre Saw is safer, faster and more economical than abrasive metal cutting saws. When cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish. Supplied with: 1 x FURY® Multipurpose TCT Circular Saw Blade 210 x 25.4mm x 24T, 1 x F255SMS Work Piece Top Clamp, 1 x Dual Ended (Blade Change) Allen Key 4 & 6mm & 1 x Dust Bag. Specification: Input Power: 1,200WNo Load Speed: 3,750/min.Cutting Capacity (W x D): Cross Cut (0° x 0°): 230 x 65mm, Bevel Cut (0° x 45°): 230 x 38mm, Mitre Cut (45° x 0°): 150 x 65mm, Compound Cut (45° x 45°): 150 x 38mmBlade Size: 210 x 25.4mm BoreMax. Mitre Left/Right: 50°/50°Max. Bevel Left: 45°Dust Port Ø: 35mmCable Length: 2mWeight: 11.2kg
The Evolution Hulk Electro Paving Pad is an essential accessory for finishing a block paving or patio job. The pad is fitted to the underside of the machine (Evolution Hulk Compaction Plate). It can then be used directly on to the flag stones or paving blocks for a perfectly even finish.
This Evolution R165CCS-Li EXT Circular Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 165 x 20mm Bore x 18T1 x Parallel Edge Guide1 x Hex Key1 x Instruction Manual
The Evolution R185CCSX Circular Track Saw is ideal for both trade and DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-20CS blade (supplied) it can cut through a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. The saw features an adjustable cutting depth and 0-45 _ bevel capabilities for versatile cutting in any material. It also features channelled air flow and a vacuum extraction port, that helps to keep the cutting line visible. The electric blade brake and blade guard (that closes in 0.4 seconds) improves user safety and reduces exposure to a spinning saw blade. Supplied with 1020mm of track which is perfect for making straight cuts in long or sheet materials with ease. The saw is also compatible with the Evolution ST1400 and ST2800 tracks (sold separately). These saws have been developed to be compatible with most leading brands of circular saw tracks. Specification: Input Power: 1,600WNo Load Speed: 240V: 3,900/min., 110V: 3,700/min.Capacity: Mild Steel Plate/Box Section 3mmMax. Cutting Thickness With/Without Track: 0°: 64/59mm, 45°: 47/42mmBlade: 185 x 20mm Bore, 16TBevel Capacity: 0-45°Cable Length: 3mWeight: 5.1kg Evolution R185CCSX Circular Track Saw 185mm 110V Version
The Evolution R185CCSX Circular Track Saw is perfect for trade or DIY users thanks to its powerful motor and optimised gearbox. When combined with the Evolution R185TCT-16CS blade (supplied) it can cut a variety of materials such as mild steel, aluminium, wood (even with embedded nails), plastic, copper, PVC and more. When cutting mild steel the saw produces a square, ready-to-weld cut with no heat, no burrs and virtually no sparks, far superior to abrasive cutting methods. Advanced safety features such as channelled air flow and vacuum extraction port help keep the cutting line visible, whilst the electric blade brake and blade guard, that closes in 0.4 seconds, reduce the time the user is exposed to a spinning saw blade. Supplied with: 1 x Multi-Material Blade 185 x 20mm Bore x 16T, 3 x 340mm Cutting Tracks, 1 x Connector Bar, 4 x Screws, 1 x Hex Key, 1 x Parallel Edge Guide, 1 x Dust Hose Connector, 1 x Instruction Manual. Specification Input Power: 1,600WNo Load Speed 240V/110V: 3,900/3,700/min.Cutting Capacities: Mild Steel Plate/Box Section: 3mmMax. Cutting Thickness:0° 64mm/59mm with track45° 47mm/42mm with trackMax. Blade Bevel Angle: 45°Blade: 185 x 20mm x 16TPower Cable Length: 3mWeight: 5.1kg Evoultion R185CCSX Circular Track Saw Kit 185mm 240V Version.
This Evolution R185CMS-Li EXT Compound Mitre Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 185 x 20mm x 20T1 x Dust Bag1 x Dust Port Adaptor1 x Top Clamp1 x Hex Key1 x Instruction Manual
The Evolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw can cut a variety of materials, such as mild steel, aluminium, wood with embedded nails, plastic, copper and more. Cuts mild steel with no heat, no burrs and virtually no sparks, leaving ready-to-weld cuts making it perfect for efficient on-site use. This invaluable tool for the home and professional workshop slices through reclaimed timber with ease and even through embedded nails, screws and staples. Dual quick-release clamps for additional accuracy and faster adjustments. Whilst the slide rail protector protects against damage and prevents dust ingress. It has a dust collection bag and a dust port adaptor for use with vacuum extraction for a cleaner working environment. The integrated carry handles make it easy to carry and transport around the workplace. Supplied with: 1 x R185TCT-20MS Multi-Material Blade, 1 x 3 Piece Hold Down Clamp, 1 x Dust Collection Bag and 1 x Dust Port Adaptor Specification: Input Power: 1,200WNo Load Speed: 3,700/min.Max. Mitre (Left/Right): 50°/50°Max. Bevel (Left/Right): 0û-45ûBlade: 185 x 20mm BoreDust Port Ø: 36mmCable Length: 3mWeight: 8.9kg Cutting Capacity: Max. Thickness Mild Steel Plate: 6mmMax. Wall Thickness Mild Steel Box Section: 3mm (50mm mild steel box section)Max. Section Wood: 210 x 56mmMin. Work Piece Size: L125 x W:30 x D:3mm Max. Cutting Angles (Width x Depth):Cross Cut (0° x 0°): 210 x 56mmBevel Cut (0° x 45°): 210 x 38mmMitre Cut (45° x 0°): 145 x 56mm Compound Cut (45° x 45°): 145 x 38mmEvolution R185SMS+ 185mm Multi-Material Sliding Mitre Saw 240V Version
This Evolution R185SMS-Li EXT Sliding Mitre Saw is supplied with: 1 x 18V 4.0Ah Li-ion Battery1 x Rapid Charger1 x Multi-Material Blade 185 x 20mm Bore x 20T1 x Dust Bag1 x Dust Port Adaptor1 x Top Clamp1 x Hex Key1 x Instruction Manual
This Evolution R18BAT-Li2 EXT Battery has the following specification: Amperage: 2.0AhVoltage: 18VChemistry: Li-ionNumber of Cells: 5Weight: 440gCharge Time: 30 min.
The Evolution R18RCH-Li1 Single Dock Rapid Charger is a smart, ultra quick lithium-ion battery charger that is designed to maximise productivity and keep you working all day long. It will fully charge a 2.0Ah battery in just 30 minutes, and a 5.0Ah battery in just 60 minutes. Compatible with all Evolution EXT li-ion batteries, this charger uses intelligent battery management to monitor cell temperature and health for extended battery life. It has a lightweight and compact design with a long cable makes it easy to transport use around site. Voltage: 18VBattery Chemistry: Li-ion
The Evolution R18RCH-Li2 Double Dock Rapid Charger is a twin port, ultra quick lithium-ion battery charger that is designed to maximise your productivity and keep you working all day long. Packed with two internal charging circuits, the charger allows two batteries at the same time while maintaining the rapid charge times of the single dock charger. It will fully charge a 2.0Ah battery in just 30 minutes, and a 5.0Ah battery in just 60 minutes. Compatible with all Evolution EXT li-ion batteries, this charger uses intelligent battery management to monitor cell temperature and health for extended battery life. Lightweight and compact design with a long cable makes it easy to transport use around site. Voltage: 18VBattery Chemistry: Li-ion
The Evolution R230RCP Multi-Material Reciprocating Saw has been designed to cut a wide range of materials from green wood to metal. Comes fitted with an ergonomic, soft grip, 180û rotating handle for maximum control and versatility without having to adjust the blade. Fully tool-less blade changes and adjustments for quick and easy use. The LED light improves visibility and precision for accurate work in low-light conditions, whilst the 3m cable length gives freedom within the workspace. Supplied with 4 single-purpose blades for the dedicated cutting of thin steel, green wood and general wood, along with a multi-material blade to increase productivity, allowing you to cut through a range of materials including plastic, copper, wood and metal. Specification: Input Power: 850WNo Load Speed: 0-2,400/min.Stroke Length: 28mmRear Handle Rotation: 180°Weight: 3.2kg
The Evolution RAGE7-S Corded Jigsaw is powerful and versatile and is capable of cutting many different materials. Its variable speed trigger increases user control and ease of operation. An ergonomic, soft-grip handle gives superb operator comfort and control. Supplied with an adjustable parallel edge guide, which acts as a useful aid when cutting and trimming laminate flooring, where accurate parallel cuts are often needed. The jigsaw also has an adjustable footplate (up to 45° right and left) which allow bevel cutting. Positive stops are provided at 45°, 30° and 15° both left and right and at 0°. Fitted with a quick-release, tool-less chuck for quick and easy blade change. It is also equipped with an air blower to blow dust away from the blade and the working area, allowing cutting lines to be kept clear and readily visible. The supplied adaptor tube allows connection to a vacuum cleaner Supplied with a multipurpose blade which is capable of cutting steel, aluminium, wood and plastics. Specification Input Power: 710WStrokes at No Load: 0-3,000/min.Bevel Capacity: 45°Capacity: Metal: 8mm, Wood: 80mmWeight: 4.1kg
