These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 45mm
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4351 Series 60 Circular Saw Blade for smooth cross-cuts in plywood, softwood and all hardwoods. The alternate top bevel and triple chip grind geometry with tuned grinding angles give a good surface finish. It has the following specification: Finish: Extra Fine.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 60.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
The DEWALT DT3502 Twist Knot Wire Wheel offers long-lasting, aggressive brushing action. An innovative internal holding plate construction provides helps to reduced knot movement and helps to increased control and brush life.Specification:Diameter: 115mmBore: 22.23mm
DEWALT DT20735 Wood & Nails Multi-tool Blade.Suitable for a wide range of cutting applications, including wood, wood with nails, drywall and PVC. UNIVERSAL FITMENT™ for adaptor-free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Specifications: Width: 30mm.Length: 43mm.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Galvanised.Size: 2.3 x 55mm.Box quantity: 13,200.
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2213-QZ (T101B) XPC HCS Wood Jigsaw Blades provide fast cuts in wood, chipboard, plywood and MDF.
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 35 SKU BT13350GA Finish GALV Description MINIBRADS 35 GALVA 5M Qty per box 5000
The DEWALT DT2102 Ceramic Cutting Jigsaw Blade has been coated with tungsten carbide grit. Ideal for cutting ceramic tiles, fibreglass and reinforced plastic up to 10mm thick.
The Bahco 59/S54BC Colour Coded Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. Supplied in a durable carry case. Contains: 8 x 25mm Phillips Bits: PH1, PH2(x4), PH3 and PH2G(x2)6 x 25mm Pozidriv Bits: PZ1, PZ2(x4) and PZ32 x 25mm Slotted Bits: 4.5 and 5.5mm16 x 25mm TORX® Bits: TX10(x2), TX15(x2), TX20(x4), TX25(x2), TX27, TX30(x4) and TX405 x 25mm TORX® Tamper-proof Bits: TTX10, TTX15, TTX20, TTX25 and TTX305 x 25mm Hexagon Bits: 3, 4, 5, 6 and 8mm2 x 25mm Robertson Bits: #1 and #22 x 125mm Phillips Bits: PH1 and PH22 x 125mm Pozidriv Bits: PZ1 and PZ23 x 150mm TORX® Bits: TX20, TX25 and TX301 x Magnetic Universal Bit Holder1 x Magnetic Quick-Release Bit Holder1 x Socket Adaptor 1/4in
The BlueSpot Tools Magnetic Nut Driver is manufactured from heat-treated and tempered steel alloy for increased strength and durability. With a blackened carbon coating to protect against corrosion. Strong magnets hold fasteners securely for ease of use. It has a 1/4in drive, ideal for use with electric drills and screwdrivers for the precise driving of nuts, bolts and hex head screws.
DEWALT 2nd Fix 15 Gauge DA Finish Nails have a smooth shank and are compatible with most 15Ga 34° angled nailers for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised (G) and Stainless Steel (S/S) options available. Pack Quantity: 1 x Box 40001 x Box of 4000 DEWALT 15 Gauge Galvanised DA Finish Nails 64mm
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX30Z 18G Galvanised Staples 30mm
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Galvanised.Size: 2.1 x 40mm.Box quantity: 24,500.
The DEWALT Universal DE7023 Leg Stand is an extendable unit and, from its 1.9m base unit, two telescopic extensions expand the working area up to 3.9m in length, which will support work pieces over 5 metres in length. The leg stand has a unique bracket mounting system that takes all DEWALT and most competitive mitre saws. These brackets are also available separately meaning that one mitre saw station can be used in conjunction with a variety of machines. These brackets can also even be used with a board to create a large surface for supporting work. The Mitre saw station also features quick release spring-loaded retractable legs, to create a secure working platform on the work site. A convenient carry handle on the underside of the stand provides easy, balanced single-handed transportation of the stand. Transportation is aided yet further by a shoulder carry strap, which is also available. With the lightweight construction of the leg stand and its compact self contained parts, this is the first mitre saw system that provides the user with a truly portable yet versatile and stable mitre saw workstation for site. Comes with: 2 x work stops / support and mitre saw brackets. Fits the following saws: DW777, DW712, DW717, DW718, DW780. Height: 820mm. Closed Length: 1.7m. Open Length: 3.9m. Max. Loading: 182kg. Weight: 19.8kg.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 38 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 38 mm.Pack : Box of 2500.
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 45 SKU BT1345GA Finish GALV Description MINIBRADS 45-GALVA 5M Qty per box 5000
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 65 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 65 mm.Pack : Box of 2500.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 44 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 44 mm.Pack : Box of 2500.
The Faithfull Fixtec Locking Nut allows angle grinder discs to be changed in seconds without the need for additional tools. Only 8mm thick, enabling more disc surface to be utilised when grinding material.Compatible with all manufacturers angle grinders up to 150mm diameter that have a standard M14 spindle thread. Not suitable for use on angle grinders with a brake or quick stop system. Please note that this product is not for use on any grinder bigger than 150mm.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett SK FB Carbon Bandsaw Blade 1,435 x 6 x 0.35mm x 6T.
This DEWALT Extreme Runtime FlexVolt Circular Saw Blade has been designed for use with the DCS577 FlexVolt Circular Saw and features a unique diamond-shaped bore that drives the blade at a higher torque. Next-generation carbide allows up to 3 regrinds and patented grind angles allow for faster cuts at a lower force. The 1.55mm thin kerf is designed specifically for cordless circular saws that require less push force when cutting. Expansion slots help to dampen noise and reduce vibration.1 x DEWALT Extreme Runtime FlexVolt Circular Saw Blade 190mm x Diamond x 36T.
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.
This DEWALT Multi-Material Drill Bit has the following specifications:Diameter: 8.0mm.Overall Length: 200mm.Working Length: 170mm.
A conical twist knot high tensile steel wire circular brush.Conical Twist knot brushes are ideal for work in hard-to-reach places such as edges or corners and are suitable for the removal of slag, rust, scale or even dried cement.Maximum/min 12,500.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3127 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 5.
Faithfull Professional Circular Saw Blade Anti Kick with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Suitable for use with table saws, radial arm saws and mitre saws, helps eliminate kick due to over feeding. Specification Blade Diameter: 250mm.Bore: 30mm.Teeth: 40.Bush: 25 & 16mm.Rake: POS.
DEWALT DXVA00-4300E Claw Utility Nozzle/Brush with stiff bristles helping to agitates surfaces for more effective debris removal. Optimised for handheld use.Compatible with 32mm (1.1/4in), 48mm (1.7/8in), and 64mm (2.1/2in) vacuum hoses.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 160mm.Bore: 30mm.Teeth: 16.Bush: 20 & 16mm.Rake: POS.
DEWALT High Performance Segmented Diamond Cutting Discs for fast cutting in masonry. Laser welded with a heat treated steel body for increased durability and long life.
1 x DEWALT DT3701 High Performance Segmented Diamond Cutting Disc 115 x 22.23mm.
DEWALT 1/3 Mesh Sanding Sheets last at least four times longer than traditional DEWALT sandpaper sheets. The fibres are drawn away from the surface into the small holes, and don't sit between the material to be sanded and the abrasive grains. This optimises the sanding effect. The dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to distinct holes in traditional sandpaper. Its easier to use mesh sanding sheets, as there is no requirement to match a specific dust extraction hole pattern. The mesh sheets can be cleaned, removing the dust from the holes and bring the sheets back to a nearly new condition. It also makes using a sander quicker and easier by not having to use clip fastening associated with non hook and loop sheets.DEWALT DTM8622 1/3 Mesh Sanding Sheets 120 Grit (Pack of 5).
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping, Crosscutting.Finish: Fine.Blade Diameter: 190mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 180mm.Bore: 16mm.Teeth: 40.Rake: POS.
