GYS filler metal for MAG welding of non-alloy and low-alloy steels. Suitable for the following applications: automotive, rail, shipbuilding and construction in general.Classification: AWS A5.18 : ER70S-6 EN ISO 14341-A : G 46 4 M21 3Si1.
1 x GYS MAG Wire Reel Steel 0.6mm 5kg.
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
1 x MEXCO XCEL Grade Diamond Tile Drill Bit 14mm
These Faithfull SDS-plus Chisel Bits are made from drop forged Chrome Molybdenum with a heat treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiseling, stripping plaster, mortar chasing, channeling and breaking through brickwork.1 x Faithfull SDS-plus Chisel Bit Angled 40mm Length 250mm
These Irwin Jigsaw Blades are carbide tipped for long life and are especially suited for abrasive materials. They are ideal for use on glass fibre reinforced plastics (5-50mm), plasterboard and fibre cement boards (<80mm).This blade has the following specifications: Popular Reference: T341HM. Length: 132mm. 6 TPI.
These Faithfull SDS-plus Chisel Bits are made from drop forged Chrome Molybdenum with a heat treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiseling, stripping plaster, mortar chasing, channeling and breaking through brickwork.1 x Faithfull SDS-plus Chisel Bit 40mm Length 250mm
This Faithfull Triangular Sanding Pad has a micro hook and loop fastening system. It is used in conjunction with the correct abrasive sheet to sand wood, metal, plastic or fillers. Compatible with many multi-function oscillating power tools.
The Faithfull Magnetic Bit Holder, Finder & Guide is designed for use with standard 1/4 hex shank screwdriver bits and can be used with any variable speed drill or cordless screwdriver. The outer sleeve or finder slides over the screw head and helps keep the bit in place. This is especially useful when driving or removing slotted screws. The combination of both the outer finder and a magnet holds the screw firmly in position making for easy starting. The extra length bit and finder also extend the reach of a driver drill for hard to reach places. Extendable from 76 - 115 mm.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 5.0 mm 13/64in. Cutting Length: 16 mm. Shank Diameter: 1/4in.
This Faithfull Magnetic Bit Holder is manufactured from stainless steel and fitted with a quick release chuck, allowing the bit to be change without opening the drills chuck. A powerful integral magnet holds the screw firmly in place while being positioned ready for driving. Size: 1/4in female by 1/4in male.
The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes including setting up. The jig has the following features: Left and right hand corners, 400mm radius peninsular joint, 45° end cut with slight radius, 45° trade corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Engraved lines for 65mm bolts and worktop cross-cut. 6 x 10mm diameter ABS plastic pins with tapered shoulders for a tight fit and 3 point pin contact to ensure ease of setting up.This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 19 mmD = 12 mm 15/32 in
This Faithfull saw blade has a broad range of applications with its carbide grit edge. It will cut out damaged tile joint and cuts grooves in plaster, porous concrete and similar construction materials. Compatible with many multi-function oscillating power tools.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 1.6 mmD = 15.9 mmC = 7.9 mmBearings = 9.5 and 12.7 mm
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 9.5 mm 3/8in. Cutting Length 25 mm Shank Diameter: 1/4in.
The Faithfull impact grade bit holders, featuring a versatile quick release chuck, accepts all standard 1/4in hex shank bits of 25mm & 50mm length or double ended format. Engineered to withstand the extreme pressures and torque exerted by modern impact drivers and drill drivers, these holders give outstanding performance in all screw driving applications. Available in 75mm or 150mm long shafts, they help provide accessibility to the most awkward to reach places.The chuck accepts all international hex shank sizes including ANSI, JIS and DIN standard screw bits and accessories.The FAISBMBH150U is 150mm long
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.5mm.Tooth Config: ATB.Machine: Table & Mitre.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 127 x 22 x 60g. Medium.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 80 x 30mm.Grit: Fine.
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN® Impact Performance Series™ magnetic screw-hold attachment. This set contains the following:2 x PZ2 screwdriver bits.2 x PH2 screwdriver bits.1 x T20 screwdriver bit. Supplied in a moulded ABS resin case.
This Faithfull SDS Plus Tile & Floor Scraper for scraping adhesives, paint, scree and soft plaster from floors and walls. It can also be used in other industrial applications such as removing adhesive and caulking membranes.Suitable for use in all hammer drills with SDS-Plus shank from Einhell, Bosch, Milwaukee, DeWalt, Makita, Ryobi, etc.
1 x Faithfull SDS Plus Tile & Floor Scraper 400 x 100mm.
This Faithfull blade has a broad range of applications where a serrated edge is advantageous. This blade saws cardboard, polystyrene, carpet, leather, rubber and similar materials. Compatible with many multi-function oscillating power tools.
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T40S x 25mm
Faithfull Impact Rated Universal Bit Holder for high torque and impact applications. This impact bit holder makes impact screwdriver bits more resistant to shock from impacting. Its optimised SHOCK ZONE absorbs more torque (versus standard bit holders). An internal dual magnets ensuring magnetism to fasteners plus auto-locking allowing one handed bit release. Accepts 25mm, 50mm and double ended bits, as well as all ANSI, JIS, DIN standard 1/4in hex shanks. Specification: Length: 300mm.Shank: 1/4in.
The Faithfull Premium Arc Cut Hardwood Bi-Metal Blade is manufactured from a combination of CrV steel body with HSS steel teeth to provide an extra-long working life. This arc edge saw blade features Japanese style teeth, ground and side set for very fast and coarse cutting. HSS steel blades of this type are particularly suited to work in hardwoods but are also ideal for cutting applications in all other types of wood, blockboard, chipboard and PVC. Applications include: - Cutting hardwood, softwood, plasterboard, plastic and plastic pipes- Precise plunge cuts in all woods and laminated panels- Precise cut outs in all woods- Flush cutting of wood components e.g. dowels and tenonsThis Faithfull Premium Arc Cut Hardwood Bi-Metal Blade has the following specification: Width: 32mmCutting Length: 50mmTPI: 14
This Faithfull Cylindrical Rasp is ideal for enlarging holes and creating shapes in non-ferrous sheet metals. For use with electric drills.Size: 12 x 30mm.Shank: 6mm.
These Faithfull Professional 1/4in Hexagon Drive Star Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: T40 x 25mm.Pack Size: 3.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 37 mmD = 19 mm 3/4 inOL = 79 mm
This Weller Helping Hands Holder frees up your hands for improved soldering precision and flexibility. It has 4 magnetic gooseneck arms with alligator clamps which are easily positionable for multiple configurations.
IRWIN Scorpion Saw Blade for cutting in wood, chipboard, plastic and PVC up to 100mm. This blade fits the Black Decker model RS890K. Specifications: Overall Length: 224mm.
These Faithfull Router Bits are designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a 2 stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. This rounding over bit produces a rounded profile along the edge of the material it differs from the Ovolo cutter by producing a single step only. Cutting Depth. 15.8 mmCutting Radius R 9.5 mm Shank Diameter. 1/4in
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 20 SKU BT1320GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainThread. M14 x 2.
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P100 VE25 Xtreme Sandpaper Sheet 100 x 150mm x P 100Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 100
Flex Power Tools D225-30 MF VE12 Xtreme Non-orbital Sandpaper Discs with extraction holes. Extra-fine sandpaper optimised for use with non-orbital sanders. Ideal for sanding drywall filler. A first-class, extra-fine surface quality can be achieved with this sandpaper.
Pack of 12 Flex Power Tools D225-30 MF-P150 VE12 Xtreme Non-orbital Sandpaper Discs 225mm x P 150Suitable for: GE 6 R-EC 230/BS, GE 7 + MH-X, GE 7 + MH-X + SHSpecifications:Diameter: 225mmGrit: P 150
