The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.
This Pack of 3 Faithfull Aluminium Oxide Flap Discs contains the following:1 x Aluminium Oxide Flap Disc 115 x 22mm 40 Grit1 x Aluminium Oxide Flap Disc 115 x 22mm 80 Grit1 x Aluminium Oxide Flap Disc 115 x 22mm 120 Grit40 grit is suitable for rough grinding and finishing of mild steel, carbon steel and alloys.80 grit is suitable for final grinding of mild steel, carbon steel and alloys.120 grit is suitable for smooth grinding of mild steel, carbon steel and alloys.
The MEXCO Unslotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Unslotted Dry Core Drill X90 Grade 91mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 132mm
This Faithfull robust Cable Reel features a thermal overload protection system to prevent damage to the cable from overheating. It has 4 shuttered sockets with a maximum load of 13A (3,120W) when fully unwound, and 4A (1,000W) when wound. The cable reel is suitable for providing electrical power for both trade and DIY users. Its semi-enclosed case allows fast rewind and helps to prevent damage to the cable when in transit or storage. A flat base keeps the reel upright for easy storage and protects the sockets from contact with wet or damp areas. Manufactured in accordance to BS EN 61242.ASTA approvedCable Length: 20m.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 100 x 16 x 40g. Coarse.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 10.0mm.
RUBI Dry Cut Diamond Drill Bits for dry drilling in ceramic, porcelain, natural stone and other materials. Usable with grinder. Supplied in blister.Specifications:Max. Operating Speed: 14,000 r.p.m.Thread: M14.
1 x RUBI Dry Cut Diamond Drill Bit 8mm.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 100 x 16 x 60g. Medium.
DEWALT HCS Reciprocating Blades for fast cuts in softwood, wood materials, plastics and other soft materials. Highly flexible carbon steel (HCS) construction. With a universal shank, fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.
Pack of 5 DEWALT HCS Reciprocating Blade for Wood, Fast Cuts 152mm x 6 TPI.Specifications:Length: 152mmPitch: 6mmPack Quantity: 5Equivalent Bosch Reference: S611D
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grade steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 300mm.
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.
1 x Faithfull Forstner Bit 16mm.
The DEWALT DXVA19-1300 Utility Nozzle is ideal for cleaning in tight spots thanks to its narrow head (17.5cm width).Compatible with 48mm (1.7/8in) vacuum hoses.
Ovollo and rounding over bearing guided cutters are ideal for curved work, they can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. All cutters supplied with two bearings, larger bearing removes the quirk producing a round over profile.Tooling : T.C.T.1/4in Shank.R = 3.2 mmD = 19 mmC = 9.5 mmBearings = 9.5 and 12.7 mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. 1/2 in Shank.C = 25 mmD = 19.1mm 3/4in
Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal.Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel 1.5-3mm, plastic 1.5-30mm, fiberglass 1-20mm.Length: 132mm.Pitch: 24. Supplied in a pack of 5.
These Blue Spot Sanding Flap Discs are suitable for efficient stripping and sanding of metal and wood surfaces. They are ideal for finishing. This 3 piece set includes the following:40 Grit, 60 Grit and 120 Grit. Each sanding flap disc has the following specifications:Diameter: 115mm.Bore size: 22.2mm.Max speed: 13,300/min, 80m/s.
The IRWIN Impact Stubby Right Angle Head is equipped with long-life, impact resistance gears. Allows you to install screws at an angle of 90 deg;. The holder has a magnet protecting the bits from falling out. Equipped with an additional handle. The 1/4in hex handle allows use in impact screwdrivers and drills. Specifiations: Head Length: 65mm.Head Width: 38mm.
The Bahco 59/S100BC Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. TORX bits are colour coded to easily identify the size of the tip. Supplied in a durable carry case. Contains:17 x 25mm Phillips Bits: PH1(x2), PH2(x9), PH3 and PH2G(x5).12 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x9) and PZ3.50 x 25mm TORX Bits: TX10(x3), TX15(x5), TX20(x15), TX25(x8), TX27, TX30(x15) and TX40(x3).5 x 25mm TORX Tamper-Resistant Bits: TTX10, TTX15, TTX20, TTX25 and TTX30.2 x 25mm Slotted Bits: 4.5 and 5.5mm.9 x 25mm Hexagon Bits: 3, 4(x3), 5, 6(x3) and 8mm.2 x 25mm Robertson Bits: #1 and #2.1 x KM653 Magnetic Universal Bit Holder.1 x KM653-QR Magnetic Quick-Release Bit Holder.1 x Socket Adaptor 1/4in.
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dirt, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity. 1 x Lessmann X-Lock Steel Knot Wheel Brush 125mm Non Spark
The special shape of the bevel brush enables the user to work in hard to reach places. They have been designed for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste. Diameter: 100mm.Width: 10mm.Bore: M14.Wire Gauge: 0.35.Wire Type: Steel STA Crimped.Max. R.P.M.: 12,000.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett RG FB Carbon Bandsaw Blade 1,511 x 6 x 0.35mm x 10T.
This Faithfull Wire Cup Brush has been designed for use with angle grinders that have a compatible thread. Suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Perfect for use on stainless steel. When standard wire brushes are used on stainless steel they can contaminate the material and cause rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification: Diameter: 65mmThread: M14 x 2Wire: Twist Knot Stainless Steel Grade 304, 0.50mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.T.C.T. Tooling1/2in Shank.C = 50 mmD = 12 mm 15/32 in
Faithfull Chisel steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Chisel. Length: 380mm. Width: 25mm.Fitting: 21mm Hex shank, Kango (900/950K).
IRWIN Mouse Sanding Finger Sheets for very detailed sanding. Velcro attachment provides reduced space between the sanding sheet and allows for higher removal rate. Compatible with the sanding finger often supplied separately with a palm sander from the BLACK+DECKER Mouse KA161, KA168, KA1000, KA2000, BEW230 and Bosch Primo. Specification: Grits: 5 x K120, 5 x K180 and 5 x K240.
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 5 x Metal Drill Bits: 2, 3, 4, 5, 6mm. 3 x Masonry Drill Bits: 5, 6, 8mm. 2 x 25mm Phillips Bits: PH1, PH2.3 x 25mm Pozi Bits: PZ1, PZ2, PZ3.2 x 25mm Slotted Bits: 4.0, 6.0mm. 1 x Magnetic Bit Holder.
Faithfull X-LOCK Conical Wire Brush is for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless steel surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. Featuring the X-LOCK quick change system, ensuring a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Specifications: Wire Type: Twist Knot Stainless Steel (304).Diameter: 115mm.Fitting: X-LOCK.Wire Size: 0.5mm.Max. RPM: 12500.
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 104 - 14MTo suit. 115 mm Mini Grinders.Thread. M14 x 2. Abrasive Disc Size 115 mm x 22 mm (4.1/2in). Machines Fitted. AEG, Black and Decker P5411, Bosch, Casals, Felisatti, Flex, Hitachi, Kress, Makita, Metabo, Ryobi, Sealy, Skil, Stayer, Taskmaster. Pin Spanner - Red
Faithfull Professional 1/4in Hexagon Drive Impact Screwdriver Bits are specifically designed and for use in high torque impact drivers. Manufactured from a unique material specially engineered for extreme durability these bits have an increased working life compared to standard screwdriver bits. Impact bits are designed to distribute impacts evenly, preventing energy waste for efficient screw driving and incorporate torsion areas to absorb torque peaks and to reduce stress at the bit tip during heavy loading. All bits feature a precision machined tip to provide an optimum fit helping to prevent screw stripping and cam-out.These Faithfull Impact Screwdriver Bits have the following specification: Size: PZ2 x 50mm.Pack Size: 3.
A conical twist knot high tensile steel wire circular brush.Conical Twist knot brushes are ideal for work in hard-to-reach places such as edges or corners and are suitable for the removal of slag, rust, scale or even dried cement.Maximum/min 12,500.Diameter: 100 mmThread: M14 x 2Wire: 0.5 mm twist knot steelConforms to ISO 9001. and DIN EN1083-1 and 2
