Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 60 x 40mm.Grit: Fine.
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs they also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Size. 127 x 22 x 60g. Medium.
Flap wheels quickly remove paint, varnish and rust, leaving the surface smooth and clean ready for repainting. For use on wood, metal, fibreglass, filler and plastics. Strips and sands in one operation without clogging. Many uses on cars, boats, in the home, in the garage and workshop. 6 mm (1/4 in) shank fits all drills, economical and longlasting.Size: 80 x 30mm.Grit: Fine.
The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with the IRWIN® Impact Performance Series™ magnetic screw-hold attachment. This set contains the following:2 x PZ2 screwdriver bits.2 x PH2 screwdriver bits.1 x T20 screwdriver bit. Supplied in a moulded ABS resin case.
This Faithfull SDS Plus Tile & Floor Scraper for scraping adhesives, paint, scree and soft plaster from floors and walls. It can also be used in other industrial applications such as removing adhesive and caulking membranes.Suitable for use in all hammer drills with SDS-Plus shank from Einhell, Bosch, Milwaukee, DeWalt, Makita, Ryobi, etc.
1 x Faithfull SDS Plus Tile & Floor Scraper 400 x 100mm.
This Faithfull blade has a broad range of applications where a serrated edge is advantageous. This blade saws cardboard, polystyrene, carpet, leather, rubber and similar materials. Compatible with many multi-function oscillating power tools.
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T40S x 25mm
Faithfull Impact Rated Universal Bit Holder for high torque and impact applications. This impact bit holder makes impact screwdriver bits more resistant to shock from impacting. Its optimised SHOCK ZONE absorbs more torque (versus standard bit holders). An internal dual magnets ensuring magnetism to fasteners plus auto-locking allowing one handed bit release. Accepts 25mm, 50mm and double ended bits, as well as all ANSI, JIS, DIN standard 1/4in hex shanks. Specification: Length: 300mm.Shank: 1/4in.
The Faithfull Premium Arc Cut Hardwood Bi-Metal Blade is manufactured from a combination of CrV steel body with HSS steel teeth to provide an extra-long working life. This arc edge saw blade features Japanese style teeth, ground and side set for very fast and coarse cutting. HSS steel blades of this type are particularly suited to work in hardwoods but are also ideal for cutting applications in all other types of wood, blockboard, chipboard and PVC. Applications include: - Cutting hardwood, softwood, plasterboard, plastic and plastic pipes- Precise plunge cuts in all woods and laminated panels- Precise cut outs in all woods- Flush cutting of wood components e.g. dowels and tenonsThis Faithfull Premium Arc Cut Hardwood Bi-Metal Blade has the following specification: Width: 32mmCutting Length: 50mmTPI: 14
This Faithfull Cylindrical Rasp is ideal for enlarging holes and creating shapes in non-ferrous sheet metals. For use with electric drills.Size: 12 x 30mm.Shank: 6mm.
These Faithfull Professional 1/4in Hexagon Drive Star Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: T40 x 25mm.Pack Size: 3.
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 37 mmD = 19 mm 3/4 inOL = 79 mm
This Weller Helping Hands Holder frees up your hands for improved soldering precision and flexibility. It has 4 magnetic gooseneck arms with alligator clamps which are easily positionable for multiple configurations.
IRWIN Scorpion Saw Blade for cutting in wood, chipboard, plastic and PVC up to 100mm. This blade fits the Black Decker model RS890K. Specifications: Overall Length: 224mm.
These Faithfull Router Bits are designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a 2 stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. This rounding over bit produces a rounded profile along the edge of the material it differs from the Ovolo cutter by producing a single step only. Cutting Depth. 15.8 mmCutting Radius R 9.5 mm Shank Diameter. 1/4in
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 20 SKU BT1320GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainThread. M14 x 2.
The Paslode F18 ELECTROGALV Brad Nails provide a discreet, fine finish. The small head size minimises any adverse decorative effect. With a chisel point to help prevent wood splitting. For use with the IM50 machine. Specification: Usage: Indoor, service class 1Nail Surface Treatment: Electro Galvanised <3 µmDiameter Wire: 1.2mmNails Per Strip: 50 These Paslode F18 ELECTROGALV 3µm Brads have the following specification: Size: F18 x 32mmPack Size: 2,000Number of Fuel Cells: 2
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P100 VE25 Xtreme Sandpaper Sheet 100 x 150mm x P 100Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 100
Flex Power Tools D225-30 MF VE12 Xtreme Non-orbital Sandpaper Discs with extraction holes. Extra-fine sandpaper optimised for use with non-orbital sanders. Ideal for sanding drywall filler. A first-class, extra-fine surface quality can be achieved with this sandpaper.
Pack of 12 Flex Power Tools D225-30 MF-P150 VE12 Xtreme Non-orbital Sandpaper Discs 225mm x P 150Suitable for: GE 6 R-EC 230/BS, GE 7 + MH-X, GE 7 + MH-X + SHSpecifications:Diameter: 225mmGrit: P 150
The DEWALT Extreme Diamond Cutting Blade has a 3 x 12mm diamond segment with an aggressive cut pattern giving faster cuts and longer blade life. With an optimised wheel edge design for better debris removal. For cutting through concrete and masonry materials, wet or dry conditions. Ideal for use with the DCS690 FlexVolt XR Cut Off Saw.This DEWALT Extreme Wet & Dry Use Diamond Blade has the following specification: Diameter: 230mmBore Size: 22.23mmSegment Height: 12mmSegment Thickness: 2.6mmMax. rpm: 6,600/min.
The LENOX LumberWolf Reciprocating Saw Blades made with POWER BLAST TECHNOLOGY. This strengthens the blade, increasing durability and reduces breaks. Patented T2 Technology reduces cutting forces on each tooth and optimises chip removal to allow efficient cutting in the widest range of materials. The Tuff Tooth design is reinforced to cut stronger and last longer.Each blade has a unique configuration including an aggressive tang angle and tapered blade shape to allow for cutting in tight areas. Ideal for cutting wood: clean or nail embedded.
Pack of 5 LENOX LumberWolf Reciprocating Saw Blade 152 x 11 x 1.3mm 6 TPI.
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T10S x 25mm
The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 190mm.Bore Size: 30mm.Tooth Count: 4.Kerf Thickness: 1.8mm.Plate Thickness: 1.4mm.Grind: FTOP.Rake Angle: 12°.
Faithfull TCT Cordless Trimsaw Blade with Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance and laser cut expansion slots to reduce heat build-up. Specially designed for use with hand-held cordless saws. This range includes blades for fast cutting and fine finishing on all types of timber and man-made boards.This Faithfull TCT Cordless Trimsaw Blade has the folowing specification: Application: General Purpose.Blade Diameter: 136mm.Bore: 10mm.Teeth: 30.Rake: POS.
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable for other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S811H Sabre Saw Blades are ideal for coarse wood, free of nails (5-100mm) and pruning green wood (up to 100mm). Specification: Length: 150mm (6in)Teeth: 10 TPI
GYS filler metal for MAG welding of non-alloy and low-alloy steels. Suitable for the following applications: automotive, rail, shipbuilding and construction in general.Classification: AWS A5.18 : ER70S-6 EN ISO 14341-A : G 46 4 M21 3Si1.
1 x GYS MAG Wire Reel Steel 0.8mm 5kg.
The LENOX® DEMOLITION CT™ Reciprocating Saw Blade features carbide tipped teeth providing the highest performance in nail embedded wood. Each tooth is precision ground on multiple surfaces to cut through nails with ease. The high-performance carbide teeth are welded to the blade using the latest technology to increase durability and prevent tooth loss. Offering up to 10x longer life than standard bi-metal reciprocating saw blades. They have a tall, thick blade profile for maximum durability in tough demolition applications.1 x LENOX® 656RCT DEMOLITION CT™ Reciprocating Saw Blade 150mm 6 TPI
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 533 x 75mm 40g
DEWALT DT20592 Bonded Abrasive Cutting Disc with aluminium oxide grain. For cutting, grinding, and finishing in inox and metal. Specially design for use with the DEWALT DCS438E2T XR BL Cut Off Tool (DEWDCS438E2T). Pack of 3.
The Bosch Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards.Bosch's diamond competence centre in Switzerland ensures consistent quality.
1 x Bosch Standard for Concrete Diamond Cutting Disc 400 x 25.4mm
The STANLEY FatMax Bit Ratchet Set covers a wide range of applications due to the useful integrated magnetic bit holder and quick change socket wrench screw. These bits are perfect for use in a power drill, cordless drills, impact driver, electric screwdriver, and much more. The modularized storage making pick-up, carrying, and storing of accessories easier. Supplied in a durable case. Contains: 3 x 25mm Phillips Bits: PH1, PH2, PH3. 3 x 25mmPozidriv Bits: PZ1, PZ2, PZ3. 8 x 25mm Torx Bits: T8, T10, T15, T20, T25, T27, T30, T40. 7 x 25mm Tamperproof Torx Bits: T10, T15, T20, T25, T27, T30, T40. 4 x 25mm Slotted Bits: 4, 4.5, 6.5, 8mm. 4 x 25mm Hexagonal Bits: 3, 4, 5, 6mm. 1 x Adaptor. 1 x Magnetic Bit Holder 60mm. 1 x 1/4in Mini Ratchet.
