DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Crosscutting.Finish: General Purpose.Blade Diameter: 216mm.Bore: 30mm.Teeth: 36.Kerf Thickness: 2.16mm.Plate Thickness: 1.60mm.Grind: ATB+R.Rake Angle: 7°.
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 160mm.Bore: 20mm.Teeth: 18.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 136mmBore Size: 10mmTooth Count: 24Tooth Config: ATBKerf: 1.66mmPlate Thickness: 1.0mmHook Angle: +20°
These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges. The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.
This DEWALT Multi-Material Drill Bit has the following specifications:Diameter: 10.0mm.Overall Length: 200mm.Working Length: 170mm.
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc 300 x 3.5 x 20mm
The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications. Compatible with many multi-function oscillating power tools.
Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angleType - 15 gauge angled finish nail.Finish - Galvanised.Length - 50mm.QTY - Box 3655.
The Faithfull SK7 Wavy Edge Insulation Cutter Blade is perfect for making fast, precise and deep cuts. It is specially designed for cutting insulation board, but can also be used on foam and other soft materials. Manufactured from high-carbon SK7 steel for a long life. Compatible with many multi-function, oscillating power tools. Specification: Cutting Length: 100mmWidth: 8-28mmMaterial: SK7 blued steel
Stanley Phillips bits are one of the most commonly used 1/4-inch screwdriver bit. These Stanley screwdriver bits come in 25, and 50mm lengths and can be packed in quantities of 3's, 10's, or 25's. All Stanley screwdriver bits are precision machined for the perfect fit, forged for added tip strength and ground for long life and durability. The Stanley range of screwdriver bits are suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Tip size: No. 1 Phillips.Length: 25mm x 1/4-inch hex. Box of 25.
This Evolution Stainless Steel Cutting Circular Saw Blade has the following specification: Diameter: 230mmBore: 25.4mmTeeth: 60Kerf: 1.8mmMax. Speed: 3,000/min.
The Dormer P813 Solid Carbide Rotary Burr Bright with pointed tree ball nose geometry for skip flute grinding and increased strength at the centre. With a reduced chance of swarf congestion and improved cutting action closer to the centre. Produces double cuts, making it a good first choice for general machining. With an improved ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reduces vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Bright Rotary Burr Pointed Tree has the following specification: Diameter: 12.70mm.Shank Diameter: 6mm.Working Length: 25mm.Overall Length: 70mm.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX25Z 18G Galvanised Staples 25mm
The Faithfull Bi-Metal Flush Cut Wood/Metal Blade is manufactured from a combination of CrV steel with HSS steel teeth to produce an extra-long working life and the ability to cut a wider range of materials including metals. This saw blade features milled and side set teeth for fine and flush cutting operations. HSS steel blades of this type are very versatile and are suited to work in a wide variety of materials including hardwoods, softwoods, PVC, aluminium, non-ferrous metal and sheet steel.Pack of 5 Faithfull Bi-Metal Flush Cut Wood/Metal Blades 32mm
The Faithfull Keyless Chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes and features a non-slip locking system for impact drilling and holesaw applications. Capacity 0.8 -10mm3/8in x 24 UNF thread. Suitable for use on rotary drills and drill drives.
The BlueSpot Tools 3/8 Drive Impact Stud Extractor is manufactured from carbon steel for increased durability. Its jaws are manufactured from chrome molybdenum. Ideal for removing broken, stripped and rusted studs. Suitable for use with a 3/8in square drive air impact wrenches. Specification: Fit Studs: 1/4in to 1/2in (6-12mm).
The DEWALT PH2 Drywall Screwdriver Bits have a modified Phillips No.2 head. They are made from heat treated steel for hardness and durability. The bits are 152mm in length and have a unique fitment that has been designed for use with the DEWALT Drywall tool DCF6201. They are perfect for screw driving applications into Drywall.DEWALT DT7206 PH2 Drywall Screwdriver Bit 152mm Pack of 5.
Irwin Sabre Saw Blades 966R Demolition offer superior construction and design, making them faster cutting and longer lasting. For use on heavy-duty and demolition applications in wood and metal. Suitable for use with materials 5mm (3/16in) and thicker. Length: 225mm.Teeth: 6 tpi. Supplied in a pack of 5.
A flat twist knot high tensile steel wire circular brush compatible with 115 mm (4 1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Conforms to ISO 9001 and DIN EN1083-1 and 2. Specification: Type: CircularDiameter: 115 x 12mm faceThread: M14 x 2Wire: 0.35mm Twist Knot SteelMax. RPM: 12,500
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depressed centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Stone Cutting Disc 230 x 3.2 x 22.23mm
The DEWALT EXTREME T Shank Metal Cutting Blades deliver superior surface finish & precision with long cutting life. The blade is 50% stronger reducing blade breakage and wandering with a reinforced tooth design for greater precision and longer blade life. The bi-metal construction provides enhanced flexibility and durability. Supplied in a pack of 3.DEWALT DT2150 EXTREME T Shank Metal Cutting Blades for fast cuts in steel up to 3mm thick. Also for aluminium, copper, brass and other soft metals to 3mm thick.
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 65mm Thread: M10 x 1.5 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
The DEWALT Torsion Pozi Bits have a hardened core for extra strength and durability. They have a flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits.DEWALT DT7225 Torsion Bit PZ1 50mm Pack of 5
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 184mmBlade Bore: 20mmTooth Count: 24Tooth Config: ATBKerf: 1.79mmPlate Thickness: 1.13mmHook Angle: +18°
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1638GZ 16 Gauge 20° Finish Nails have the following specification: Length: 38mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
The DEWALT DEWDT2054QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals and are made from fully hardened high speed steel for increased durability. This Longer life metal cutting blade can be used on thin sheet metal between 1.5 - 4mm especially when curved cuts is required. The DEWALT DEWDT2054QZ blades have the following specifications:Overall Length: 82mm Length: 55mm Tooth Pitch: 1.5mm Max Doc: 4mm Equivalent Ref: T118EOF Pack Quantity: 5
DEWALT Extreme Tri-Flute Spade Bits with 3 cutting edges for up to 6x faster cutting, combined with a tri-flute for optimum chip removal and less binding. There are 3 cutting spurs for cleaner and faster holes, the spurs also extend drilling life. Its full screw tip allows the bit to self-feed, for ease of use and pull through.Fitted with a quick-change shank, fits standard quick-change extensions and 1/4in hex bit adaptors. For use with corded and cordless drills. Suitable for drilling holes in wood up to 100mm deep.
1 x DEWALT Extreme Tri-Flute Spade Bit 28 x 152mm.
The Faithfull Multi-Cut Cutting Discs will cut a wide range of materials used in the construction and fabrication industries. At only 1mm thick they are able to provide a fast cutting action with less waste and dust. Multi-Cut discs solve the problem of cutting several different materials at once and are ideal for cutting modern day composite materials used throughout industry. Will cut sheet metal, stainless steel (inox), pipes and profiles, brick, stone, ceramic tiles and other building materials along with plastics/ PVC. These versatile discs are available in the three most popular sizes and are supplied in a sturdy metal storage tin of ten for safe keeping.Pack of 10 Faithfull Multi-Purpose Cutting Disc 125 x 1.0 x 22.23mm
The DEWALT PH2 Drywall Screwdriver Bits have a modified Phillips No.2 head. They are made from heat treated steel for hardness and durability. The bits are 152mm in length and have a unique fitment that has been designed for use with the DEWALT Drywall tool DCF6201. They are perfect for screw driving applications into Drywall.DEWALT DT7207 PH2 Drywall Screwdriver Bit 152mm Pack of 20.
