The Starrett BU232-5 Metal Cutting Jigsaw Blades with Unified Shank™. These blades will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied in a pack of 5. Specification Length: 50mm.Width: 7.5mm.Thickness: 1mm.TPI: 32.Tooth: Regular.Set: Wavy. Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.
Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Finish: Galvanised.Size: 2.8 x 65mm.Box quantity: 7500.
The Faithfull TLDB4L is capable of converting the power from a single cable input into a four way output making it ideal for running multiple power tools and site lighting. The Faithfull TLDB4L is a 110 volt 4 way splitter box and comes with a 5 metre cable with 110 volt socket plug that can be used in conjunction with Faithfull 110 Volt cable reels. This unit has a strong metal construction for daily site usage, and the 4 outlets are protected from debris with flip up plastic covers which also protect the outlets when not in use. Note: Total load applied must not exceed 1760 watts (16 amps) If a transformers is in use always check its capacity before linking a distribution box to ensure an overload does not occur. 110 Volt4 x 110 Volt outlets Load must not exceed 1760 watts (16Amps)
Irwin Phillips insert screwdriver bits engineered for use in hand-driving applications or with power tools, designed for use in insert holder with C-clip for retaining ring notch. Compact and versatile with a 1/4 inch hex body and made from high grade S2 Steel.The Irwin IRW10504388 Screwdriver Bits come in the following:Pack of 2 Phillips PH2 x 25mm long.
Perforated 1/3 sheet orbital sanding sheets. The perforated holes have two banks of three parallel dust extractions holes with one at either end of the sheet. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. These tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. Suitable for use on: wood, paint & metal Size : 93 mm x 230 mm (1/3 Sheet Size) 8 Hole Configuration. Packed in 10sFlexovit 1/3 perforated sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 93 mm x 230 mm (1/3 Sheet Size) 8 Hole Configuration.
The Faithfull range of open drum cable reels come in a choice of 25m or 50m cable lengths (1.5mm diameter cable) plus a 25m heavy-duty (2.5mm diameter cable) version for larger site applications - all of which are fitted with thermal overload protection and are manufactured to British Standard BS EN 61242 All reels feature a sturdy steel frame construction with carry handle for easy movement around the worksite. They are fitted with 2 outlet sockets to run 1 or more power tools etc, the sockets are protected with spring loaded flaps to keep unwanted debris out when not in use and a winding knob for easy and tangle free reel-in. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.110VFully Unwound 1760W (16 amp)Fully Wound 660W (6 amp)Twin sockets and 50m of cable with fitted plug1.5mm cable diameter
Irwin Speed Hammer flat chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The Irwin IRW10502187 Speedhammer Max flat chisel has the following dimensions:Size: 25 x 280mm
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Metal Cut Off Disc 355 x 2.8 x 25.4mm
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainType: GRIP® fastening - Use with Flexipad foam support pads 36350 (M14), 36355 (5/8).
Soft sponge, open cell, for polishing and compounding of cellulose, acrylics etc. An all purpose foam with a medium grade density. Type. BCH - 14m.Diameter: 150mm x 50mm. Made in Great BritainThread. 5/8 UNC.
Compressed composite wood biscuits for joining. The Faithfull wood biscuits are available in 3 sizes.Also available is a box of 375 assorted biscuits (sizes 0, 10, and 20) which contains a glue bottle and spreader.The Faithfull FAIDOWBIS20 wood biscuits come in a tub of 100, size no. 20. Dimensions: 56mm x 23mm
The IRWIN Bi-Metal Reciprocating Blade Set contains a selection of blades that cover the most popular cutting applications. Wood cutting blades are great for roughing-in work and nail-embedded wood. Metal cutting blades cut all metals including non-ferrous pipe conduit, stainless steel and sheet metals. Contains the following: 5 x Nail Embedded Wood Bi-Metal Blades 152mm x 6 TPI4 x Thick Metal Bi-Metal Blades 152mm x 14 TPI1 x Medium Metal Bi-Metal Blade 203mm x 18 TPI1 x Nail Embedded Wood Bi-Metal Blade 228mm x 6 TPI
The Faithfull Bi-Metal Flush Cut Wood/Metal Blade is manufactured from a combination of CrV steel with HSS steel teeth to produce an extra-long working life and the ability to cut a wider range of materials including metals. This saw blade features milled and side set teeth for fine and flush cutting operations. HSS steel blades of this type are very versatile and are suited to work in a wide variety of materials including hardwoods, softwoods, PVC, aluminium, non-ferrous metal and sheet steel.1 x Faithfull Bi-Metal Flush Cut Wood/Metal Blade 44mm
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainTo suit. 100 mm Mini Grinders.Thread. M10 x 1.50.Abrasive Disc Size 100 mm x 16 mm (4 in)Machine Fitted.New Makita Pin Spanner - Green
Softer flexibility grinder pads are recommended for 80+ finer grits. ISO 15636 quality standard featuring excellence, resilience and high resistance to distortion making them the worlds ultimate. This range is better suited for use on curved surfaces and edges.Made in Great BritainThead size M14 x 2.0
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 90-UTo suit. 100 mm Mini Grinders.Thread. 3/8 x 24 UNF. Abrasive Disc Size. 100 mm x 16 mm (4in). Machines Fitted:- Atlas Copco.Cp9110/854E (Later models Desoutter 308, 355, 370, Myton). Pin spanner - Green
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 900mm (36in)
Compressed composite wood biscuits for joining. The Faithfull wood biscuits are available in 3 sizes.Also available is a box of 375 assorted biscuits (sizes 0, 10, and 20) which contains a glue bottle and spreader.The Faithfull FAIDOWBIS10 wood biscuits come in a tub of 125, size no. 10. Dimensions: 53mm x 20mm
This Stanley 31 piece set of 1/4in drive bits is supplied in a plastic case and contains: 3 x Phillips Bits: PH1, PH2 & PH33 x Pozi Bits: PZ1, PZ2 & PZ33 x Slotted Bits: 4, 4.5 & 5mm11 x TORX Bits: T10, T15, T20(2), T25(2), T27(2), T30(2) & T405 x TORX Security Bits: T10, T15, T20, T25 & T304 x Hex Bits: 3, 4, 5 & 61 x 1/4in Drive Adaptor Bit1 x 60mm Magnetic Bit Holder
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil. The blades have an aggressive shank angle for longer cutting life with sharper tooth geometry for faster cutting in ferrous and non ferrous metal, sheet metal, pipes and profiles.This DEWALT Bi-Metal Metal Cutting Reciprocating Blade has the following specification: Application: Cuts in metal, sheet metal, pipes and profiles.Material Thickness: 3mm.Length: 152mm.Pitch: 1.4mm.Pack Quantity: 5.
The Faithfull Bi-Metal Flush Cut Wood/Metal Blade is manufactured from a combination of CrV steel with HSS steel teeth to produce an extra-long working life and the ability to cut a wider range of materials including metals. This saw blade features milled and side set teeth for fine and flush cutting operations. HSS steel blades of this type are very versatile and are suited to work in a wide variety of materials including hardwoods, softwoods, PVC, aluminium, non-ferrous metal and sheet steel.Pack of 5 Faithfull Bi-Metal Flush Cut Wood/Metal Blades 44mm
The Faithfull Bi-Metal Flush Cut Wood/Metal Blade is manufactured from a combination of CrV steel with HSS steel teeth to produce an extra-long working life and the ability to cut a wider range of materials including metals. This saw blade features milled and side set teeth for fine and flush cutting operations. HSS steel blades of this type are very versatile and are suited to work in a wide variety of materials including hardwoods, softwoods, PVC, aluminium, non-ferrous metal and sheet steel.Pack of 5 Faithfull Bi-Metal Flush Cut Wood/Metal Blades 32mm
