These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 50mm
Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. T.C.T. Tooling1/2in Shank.C = 25 mmD = 25 mm 63/64 inOL = 65 mm
The DEWALT reciprocating bi-metal construction blades combine HCS and HSS for increased flexibility, durability and have been designed for use with cordless machines. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil and these blades are ideal for fast cutting of metals, wood and plastics.The DEWALT DEWDT2346QZ reciprocating blades are ideal for use with ferrous and non-ferrous metals up to 3mm thick.
The DEWALT DT20591 Diamond Tile Blade 76mm for dry and wet cutting in all types of tile and ceramics. Its fine diamond grit provides a precise chip free finish. Specially design for use with the DEWALT DCS438E2T XR BL Cut Off Tool (DEWDCS438E2T).
The DEWALT SDS Max steel flat chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long life and have a flat end.The DEWALT DEWDT6825QZ SDS Max steel flat has the following dimensions:Width: 80mmLength: 300mm
This DEWALT Multi-Tool Blade is specifically designed for flush cutting applications. It has a bi-metal construction for improved durability. The blade is quick and easy to change and fits all common oscillating tools. Suitable for use on the following materials:Wood with nails.Wood.Drywall.PVC. Specifications: Blade length: 23mm.Blade width: 100mm.
2 piece screwdriver bit holder set with 1/4in hex shanks. With magnetic bases to hold bits in place.The longer bit holder is ideal for working in awkward places where space is tight. Sizes: 60mm and 150mm.
Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 32mm.
This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork. Manufactured to EN 13236 Standards.This Faithfull Contract Diamond Blade has the following specification: Size: 115mmBore Size: 22.2mmPack Quantity: 3
Designed for use with angle grinders with a compatible thread and are suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Wire: High tensile twisted steel Type: CupFace Diameter: 65mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 12,500.
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diameter: 75mm.
These Faithfull Professional 1/4in Hexagon Drive Star Screwdriver Bits are manufactured from high strength, heat treated ‘S2’ grade steel. Bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.These Faithfull S2 Grade Steel Screwdriver Bits have the following specification: Size: T30 x 25mm.Pack Size: 3.
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 12.0 mm 15/32in. Cutting Length: 19 mm. Shank Diameter: 1/4in.
Tungsten carbide cutting edges, suitable for DIY and Professional use. The guide bearing can follow complex and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood.Supplied with 2 bearings 9.5 and 12.7 mm to enable use as either ovolo or rounding over bits.Diameter 32 mmRadius 9.5 mmDepth 16 mmShank 1/4in
The DEWALT DT70703 Screwdriving Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 1 x 25mm Slotted Bit: 6mm8 x 25mm Phillips Bits: PH1, PH2(x5) & PH3(x2)22 x 25mm Pozi Bits: PZ1(x3), PZ2(x14) & PZ3(x5)5 x 25mm TORX Bits: T20, T25(x2) & T30(x2)6 x 25mm TORX Security Bits: T10, T15, T20, T25, T30 & T40 1 x 50mm Phillips Bit: PH22 x 50mm Pozi Bits: PZ2 & PZ31 x 50mm TORX Bit: T25 1 x Bit Holder Plus a pair of Tinted Safety Glasses.
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work Don't use Depressed Centre cutting discs as grinding wheels1 x Faithfull Depressed Centre Metal Cutting Disc 180 x 3.2 x 22.23mm
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work Don't use Depressed Centre cutting discs as grinding wheels1 x Faithfull Depressed Centre Metal Cutting Disc 125 x 3.2 x 22.23mm
A conical twist knot high tensile steel wire circular brush.Conical Twist knot brushes are ideal for work in hard-to-reach places such as edges or corners and are suitable for the removal of slag, rust, scale or even dried cement.Maximum/min 12,500.Type: Knot conical Diameter: 115 mmThread: M14 x 2Wire: 0.5 mm twist knot steelConforms to ISO 9001. and DIN EN1083-1 and 2
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 610 x 100mm 80g
Bostitch Stanox staples are also known as 84 series. For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5 mm x 1mm, 12.3 mm crown staple with 12 mm leg length.
Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 50 21° Collation AngleProfile RING Finish BRIGHT Description RH STICK 2.80-50 RING 2M Qty per box 2000 Will Fit F21PL-E, N79RH-2
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 4,500
Thie Faithfull Bit Holder is designed to hold a screw via the magnetic sleeve to allow for hands free operation and is ideal for drywall applications. Length: 58mm.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett RG FB Carbon Bandsaw Blade 1,638 x 13 x 0.65mm x 14T.
The Bosch PRO SDS Max-7 Drill Bit punches into tough materials with its robust carbide 4-cutter head. Its flutes have a special design helps you reduce vibrations and remove dust effectively. This means you can enjoy the drill bit's performance for a long time. Fits all SDS max rotary hammers.Specifications:Diameter: 35mmWorking Length: 1200mmOverall Length: 1320mm
MEXCO SDS Chuck Adaptor Pack for use with diamond core drills. Includes:1 x SDS to 1/2in BSP Male Adaptor 250mm1 x A-Taper Pilot Drill 175mm1 x Drift Key
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 171-WTo suit. 178 mm Angle Grinders.Thread. 5/8 x 11UNC Abrasive Disc Size. 178 mm x 22 mm (7in). Machine Fitted. Atlas Copco, Desoutter, Ingersoll Rand, Wolf. Pin Spanner - Red
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.1 x Faithfull Cloth Sanding Belt 915 x 100mm 120g
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 50 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 50 mm.Pack : Box of 2500.
The Flexipad Medium Density Pads are suitable for polishing and grinding, these will accept GRIP® and hook and loop backed sanding discs. The super polyurethane backing pad is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane and with internal thread to suit sanders and polishers. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great Britain.Size: 178mm.Thread: M14 x 2.Max RPM: 4500.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: General Purpose.Blade Diameter: 230mm.Bore: 30mm.Teeth: 30.Rake: POS.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fine Cross Cut.Blade Diameter: 230mm.Bore: 30mm.Teeth: 30.Rake: POS.
This Freud Wood Circular Saw Blade built for cordless circular and plunge saws. The thin-kerf tooth design reduces friction for maximised battery runtime and ease of cut. Made from a specially formulated, highly compact Titanium Cobalt Carbide (TiCo). Provides a sharper edge and flawless finish with a longer cutting life.Permashield provides a non-stick coating to withstand the toughest applications. provides thermal insulation, protects from corrosion and eliminates resin build-up, reducing downtime for cleaning. Ideal for cutting hard wood, soft wood, plywood, chipboard and MDF.
This Freud Wood Circular Saw Blade has the following specifications:Blade Diameter: 160mmBore Diameter: 20mmKerf: 2.2mmBlade Thickness: 1.6mmTooth Count: 48
The Freud Wood Mitre Saw Blade is made from a specially formulated, highly compact Titanium Cobalt Carbide (TiCo). Provides a sharper edge and flawless finish with a longer cutting life. Permashield provides a non-stick coating to withstand the toughest applications. provides thermal insulation, protects from corrosion and eliminates resin build-up, reducing downtime for cleaning. Ideal for cutting hard wood, soft wood, plywood, chipboard and MDF.
This Freud Wood Mitre Saw Blade has the following specifications:Blade Diameter: 260mmBore Diameter: 30mmKerf: 2.4mmBlade Thickness: 1.8mmTooth Count: 60
This Freud Wood Circular Saw Blade built for cordless circular and plunge saws. The thin-kerf tooth design reduces friction for maximised battery runtime and ease of cut. Made from a specially formulated, highly compact Titanium Cobalt Carbide (TiCo). Provides a sharper edge and flawless finish with a longer cutting life.Permashield provides a non-stick coating to withstand the toughest applications. provides thermal insulation, protects from corrosion and eliminates resin build-up, reducing downtime for cleaning. Ideal for cutting hard wood, soft wood, plywood, chipboard and MDF.
This Freud Wood Circular Saw Blade has the following specifications:Blade Diameter: 190mmBore Diameter: 20mmKerf: 2.4mmBlade Thickness: 1.6mmTooth Count: 48
