Bostitch Stanox staples are also known as 84 series. For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5 mm x 1mm, 12.3mm crown staple with 14mm leg length.
This Trend CraftPro Cordless Saw Blade Triple Pack contains: 1 x CSB/16524T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 24T 1 x CSB/16540T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 40T 1 x CSB/16552T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 52T Not for use with Bosch GSK 24.
The Faithfull Wheel Dresser has been designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheels. Heat treated body with powder coated finish. Cast iron handle ergonomically designed for a comfortable grip. Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels. Suitable for wheels up to 20in
Zenith Tripomax Polishing Bar is used for the first stage polishing of brass, copper, aluminium or plastics. Use with stitched cotton mops. Colour: Brown. Supplied in a pack of 2.Size (L x H x W): 102 x 20 x 35mm.
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size.3.5 metre (9/64in).Screw Size. No.10
Faithfull Chisel steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Chisel.Length: 450mm. Width: 25mm.Fitting: 21mm Hex shank, Kango (900/950K).
Bosch PRO Stainless Steel T118EFS Jigsaw Blades are made form bi-metal with a high-speed steel (HSS) tooth strip bonded with a more elastic high-carbon steel (HCS) body. This means it has strength and flexibility you need to tackle stainless steel. The blade’s milled wavy-set and fine-pitched teeth effectively cut stainless steel sheets between 1.5 and 4mm thick. The PRO Stainless Steel T118EFS Jigsaw Blade will be a long-lasting addition to any metal shop. Fits all T-shank jigsaws.
The Bosch SDS plus-3 Drill Bits offer durability whilst drilling concrete. The 4-flute dura design provides effective dust removal for increased endurance. Made from high-alloy steel with optimised hardening technology to withstand wear. Indented cutting edges made from a Bosch-controlled carbide blend provide additional resistance.The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings.
1 x Bosch SDS plus-3 Drill Bit 6 x 100 x 160mm
The Blue Spot Tools Circular Saw Blades are manufactured from carbon steel for increased durability. The carbide tipped teeth have a 15° positive rake. Ideal for many materials including hardwood, softwood, chipboard and other composite materials. This 3 piece set includes: 1 x TCT Circular Saw Blade 210 x 30mm Bore x 24T. 1 x TCT Circular Saw Blade 210 x 30mm Bore x 40T. 1 x TCT Circular Saw Blade 210 x 30mm Bore x 48T. 3 x Reducing Rings: 25mm, 20mm and 16mm.
RUBI TVA 115 SUPERPRO Turbo Viper Diamond Blade for cutting hard materials such as granite, rustic tiles, klinker, refractory, slate, quartzite and porcelain tile. This diamond band offers greater speed of cutting harder materials without sacrificing finish quality. Only for straight cuts, not suitable for mitring.Specifications:Diameter: 115mm.Bore: 22.2mm.Thickness: 1.4mm.
The DEWALT Black Gold HSS Drill Bits are made with a tapered web design for extreme durability. The black and gold coating helps to prevent rust and wear. A 135 deg; split point tip helps to reduce walking. While the bits also incorporate a 3-flats shank to reduce spin-out in the chuck. Suitable for drilling in plastic, wood, and metal. 1 x DEWALT BLACK GOLD HSS Drill Bit 3.2mm.
Three heavy-duty 14 meter 110V trailing leads available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. All leads are fitted with an industrial plug and socket to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. 110VLength: 14m110V 16 amp socket110V 16 amp plug1.5mm cable
The Faithfull 240 volt open drum cable reels have a heavy-duty plastic drum on a sturdy steel frame with carry handle and a thermal overload protection system to prevent overheating damaging the cable. They are fitted with twin 240 volt sockets and the 1.25mm² cable is with fitted with a standard 240 volt plug. When using a 240v cable reel outdoors, or in the vicinity of a machine with mechanism which could damage the cable, it is recommended that an RCD device (FPP RCD) is used at the power source in conjunction with the reel. Always check that the power supply matches the voltage on the reel’s rating plate. Never attempt to connect a 240 volt appliance to a 110 volt supply and vice versa. If you need to use a cable reel, select one suitable for the power input of the appliance. Complies to BS EN 61242. NOTE: All cable reels should be fully unwound before they are used to carry their recommended maximum load.This Faithfull Power Plus Open Drum Cable Reel has the following specification: Cable Length: 25 Metres.Voltage: 240 Volt.Fully Unwound: 3120 Watt (13 Amps).Fully Wound: 1000 Watt (4 Amps).
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of sizes and wire styles are available.Diameter.80mm.Wire Height. 22mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 8,500.
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1632GZ 16 Gauge 20° Finish Nails have the following specification: Length: 32mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
Flexipads FINE CUT Liquid Shine quickly and easily removes marks from P2000 sanding papers and moderate oxidation to create a high gloss finish. It is free of silicone, wax and glaze and removes problems rather than hides them. FINE CUT Liquid Shine is designed for Ceramic and scratch-resistant Clearcoat and is excellent for the final finish on Gelcoat. It should be used on fresh or fully cured paints. Suitable for use with foam and wool pads and works at low speed. It does not require water and will not mark plastics. FINE CUT Liquid Shine is free of silicone for better health and safety and is biodegradable. Size: 500ml.
This Trend 3/2 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.0mm (15/64in)C: 16mmOL: 48mmShank Diameter: 1/4in Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length 18 SKU 1061800SE Finish STANOX (Copperwash)Description Mini Pin 18mm Stanox 20m Qty per box 20000 Suits: TU216-2330 Tacker
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc 115 x 3.2 x 22.23mm
Faithfull Professional Security Screwdriver Bits are designed for use with tamper-resistant, security TORX (Star) head fixings which have a small pin inside their drive recess to prevent the use of a standard TORX driver, tamper-proof fixings of this type are often found on electrical appliances. Manufactured from high-strength, heat treated ‘S2’ grade steel. These bits are shock and wear resistant and feature precision machined tips to provide an optimum fit, helping to prevent screw stripping and cam-out and provide a long working life.Pack of 3 Faithfull Security S2 Grade Steel Screwdriver Bits T15S x 25mm
Faithfull SDS Max chisel steels are produced to provide high performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular machines used in the UK. Type: Chisel.Fitting: SDS Max.FAIMAXC400Length: 400 mm Width: 25 mm
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbide, brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 10.0 mm 3/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.
Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc.Compared to dowelling, biscuit joinery is faster and more precise.The biscuits are made of laminated beech which is then compressed before being die cut.Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e.g. PVA Glue).Trend BSC/20/1000 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 1000.
1/3 Sanding Sheets made from aluminium oxide on a flexible E-Weight paper backing, these sheets are cut to the correct size and shape. Suitable for Black & Decker Sanders: Clip On, Holed.Size: 93 x 230mm.
Faithfull E-Weight Aluminium Oxide floor sanding discs are for use with edge sanders for renovating, sanding, and the finishing of wooden floors. Heavy-duty aluminium oxide sanding disc on E-Weight paper backing. Diameter: 178mm.Bore: 22mm.Floor Disc E-Weight Aluminium Oxide Grit: 24g.
This Stanley Magnetic Bit Holder has been precision machined. The magnetic recess holds 1/4in insert bits securely when in use. Sold singularly or as a box of 5 bits. Length: 60mmBox of 5 Stanley Magnetic Bit Holder 1/4 Hex Bits
This Faithfull Mounted Stones Set comprises 5 miniature grinding wheels, ranging from 13mm to 24mm in diameter with 6mm (1/4 inch) shanks for compatibility with most electrical and cordless drills. The grinding wheels are ideal for sharpening and grinding steel, metals, glass, ceramics and plastics. Shapes include tree, cone, large cone, cylindrical and ball. Maximum speed: 30,000 / min.
GYS Filler Wire for welding carbon steels and manganese carbon steels without gas. It is mainly used for thin pieces of metal (Applications: General construction, Metal frame, Shipbuilding, Extraction industry, Agriculture construction and maintenance, Tanks and boilers.Classification: AWS A5.20: E71T-GS, EN ISO 17632-A: T 42 Z W N 1 H15.Specifications:Wire Diameter: 0.9mm.Weight: 0.9kg.
The Bosch Extra Hard Screwdriver Pozi Bit is a good choice for universal use. Made using S2 Modified Steel and an optimised heat treatment process for an 'extra-hard' quality for an adequate performance. The tapered torsion zone copes easily with torque peaks, fulfilling all tasks. The hex shank provides a strong connection and maximum torque transmission in three-jaw chucks and 1/4in internal hex tool holders. Suitable for use with rotary drills/drivers.
Pack of 25 Bosch Extra Hard Screwdriver Bits PZ2 x 25mm
