Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life and should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.Outside Diameter:- 1/2inInside Diameter:- 1/4inThickness:- 3/16in
The Faithfull angled bit holder is designed for use with either a cordless or electric powered drill for screwdriving applications where access is restricted. The 360° adjustable drive head may be used in conjunction with any screwdriver bit that has a 1/4in hex shank.
Hard flexibility Turbo grinder pads are recommended for 36+ finer grits. ISO 15636 quality standard featuring air flow ribs which keep the pad and abrasive cooler, making them last longer. Perfect for tougher grinding operations. Made in Great BritainThread Size : M14 x 2.0 Pin Spanner (if Required) Zinc (Optional)
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 171-14MTo suit.178 mm Angle Grinders.Thread. M14 x 2. Abrasive Disc Size 178 mm x 22 mm (7in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, Clarke, ELU, Fein, Felisatti, Flex, Hitachi, Holzher, Kango, Kress, Makita, Manson, Matco, Metabo, Perles, RY061, Stayer, Superstork LH21, Teksan. Pin Spanner - Red
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 116-14MTo suit. 125 mm Mini Grinders.Thread.M14 x 2. Abrasive Disc Size 125 mm x 22 mm (5in). Machine Fitted :-AEG, Black and Decker, Bosch, Casals, ELU, Fein, Flex, Hitachi, Holzher, Kress, Makita, Manson, Metabo, Perlea, Ryobi, Stayer, Teksan. Pin Spanner - Red
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 104 - 14MTo suit. 115 mm Mini Grinders.Thread. M14 x 2. Abrasive Disc Size 115 mm x 22 mm (4.1/2in). Machines Fitted. AEG, Black and Decker P5411, Bosch, Casals, Felisatti, Flex, Hitachi, Kress, Makita, Metabo, Ryobi, Sealy, Skil, Stayer, Taskmaster. Pin Spanner - Red
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 90-10MX.To suit. 100 mm Mini Grinders.Thread. M10 x 1.5. Abrasive Disc Size. 100 mm x 16 mm (4in). Machine Fitted:-Black and Decker, Bosch 1347.0, Broomwade 1009, Clarke, Compare BW10011, CP9110, Felisatti, Hitachi, Perles, Ryobi, Stayer. UT8750. Pin spanner - green
Softer flexibility grinder pads are recommended for 80+ finer grits. ISO 15636 quality standard featuring excellence, resilience and high resistance to distortion making them the worlds ultimate. This range is better suited for use on curved surfaces and edges.Made in Great BritainThread Size M14 x 2.0
The Faithfull Aluminium Wide Track Cutting Guide makes easy work of marking out and cutting sheet materials. Lightweight, rigid design for effortless handling. The easy-to-operate lever action jaws have large, soft grip clamping surfaces that securely lock on to the workpiece. The extra wide and thick reinforced aluminium profile offers increased durability over many other similar products. Two integrated T-slots accept M6 bolt heads to attach workshop accessories. The heat-treated zinc plated clamping bar and glassfibre reinforced nylon jaws ensure the clamp will have a long working life. Ideal for use with plywood, MDF, most other sheet materials, and for cutting doors and worktops to size. It can also be used as a clamp when gluing smaller panels together. They can be used as a guide for jigsaws, routers and circular saws, as well as marking pencils and knives. Available in two sizes with a surface clamping capacity of either 900mm (36in) or 1250mm (50in).1 x Faithfull Aluminium Wide Track Cutting Guide 1250mm (50in)
The tough and sharp high performance aluminium oxide, combined with dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56838 backing pad, sold separately.Pack of 3 Flexovit Aluminium Oxide Fibre Discs 125mm Fine 80g
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 10 Flexovit Aluminium Oxide Fibre Discs 115mm Medium 50g
The Faithfull FAIPINKEY adjustable pin key is for use with locknuts on angle grinders when fitting or removing abrasive discs. It is a fully adjustable pin wrench from 15 to 52mm with a pin diameter 4mm. The stepped spanner handle can be used to undo nuts from 10 to 19mm. The FAIPINKEY is an ideal replacement pin wrench for most angle grinders, bench grinders, mitre saws and circular saws.
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain50 mm P120 to suit Flexipads spindle parts FLE48210 (Hard face) FLE48110 (Soft face).Excellent for woodworking. Type: GRIP® fastening.Size: 50 mmGrade: P60
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain50 mm P120 to suit Flexipads spindle parts FLE48110 (Hard face) FLE48210 (Soft face).Excellent for woodworking. Type: GRIP® FasteningSize: 50 mmGrade: P240
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain25 mm P120 to suit Flexipads spindle parts FLE48105 (Hard face) FLE48205 (Soft face).Excellent for woodworking. Type: GRIP® fasteningSize: 50 mmGrade: P120
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings.Cutters can be combined to form compounded one-off mouldings for individual applications.Tooling T.C.T.1/4in Shank. R = 4.8 mmD = 28 mmd = 25.7 mmB = 16 mm
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm.
Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters.Tooling :TC1/4in Shank. D =22 mmC =12.6 mmR =1/4 inchR =6.3 mmP =9 mm
Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters.Tooling :TC1/4in Shank. D =26 mmC =14.3 mmR =5/16 inchR = 8.0 mmP =9mm
The Faithfull Power Plus 7.4V 8800mAh Li-ion Battery may be used to provide extended running times for the FPPSLLED20TB Cordless LED Site Light to supply continuous illumination. This additional battery allows the battery packs to be cycled as a when they become exhausted and is particularly useful when no other power supply is available. The battery can be independently charged using either the mains or car charger and can also be recharged while the lamp is in use when a power source is available. Specification: Battery: 7.4V 8800mAh Li-ionCharging Time: Approx. 4 hours
Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work.The TRE63127 Collet Sleeve has the following specifications: Diameter: 12.7mm (1/2in)Internal Bore 6.35mm (1/4in)Bore: 8mm.Overall length: 30mm.
