The Einhell TE-DA 18/760 Li Solo Drain Cleaner with a durable zinc coated coil and sprial that won't rust. Entering and exiting the pipe is easy thanks to the powered feed and results in a neat and tidy cleaning solution. The direction of rotation can be reversed for clearing even major blockages. For user-friendly cleaning the drum has an inlet, outlet and locking mechanism. An LED illuminates the work area. Its ergonomic design and soft grip result in exceptionally easy handling. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This drain cleaner comes as a Bare Unit, NO battery or charger. Specifications: Cable Length: 7.6m.Cable Diameter: 7mm.Min./Max. Pipe Diameter: 16/55mm.Rotation Speed: 560/min.Weight: 3.69kg.
The Monument 4527C Grip+ T6 Three Pin Sink Rose Tool is for holding a sink strainer rose in position whilst tightening and loosening nut. Used with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.
Arctic Hayes Classic 3g Smoke Cartridges with an easy-to-use finger grip base. Perfect for testing air filters, fume hoods, air balancing and fans, as well as for use within mandatory testing of flues, chimneys, pipe and ductwork. Each cartridge supplies approximately 5m³ of dense smoke for 45 seconds. Supplied in a resealable plastic pack. Complies with BS 5440-1.Pack of 10 Arctic Hayes Smoke Cartridges Classic 3g Grey.
Arctic Hayes Silicone Grease lubricates rubber, plastics and other materials for use on valves, taps and rubber O-rings, making it an ideal plumbers grease. Complies with UK water fittings by-laws. WRAS approved.1 x Arctic Hayes Silicone Grease 500g Tub
Arctic Hayes Gas Leak Spray is non-flammable and non-corrosive. Use to detect leaks in joints, connections, etc. Safe for use on oxygen pipes. Complies with BS EN 14291:2004.
The Arctic Hayes Drain Down Hose will suit most plumbing system drain downs. Made from flexible and tough, natural red rubber. Will not kink or tear with regular use. Supplied with a thumb screw hose clip. Specification: Internal Diameter: 12.7mm (1/2in)Outer Diameter: 19.05mm (3/4in)1 x Arctic Hayes Drain Down Hose 15m
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 75mm (3 in)
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5685 Universal Brush 225mm (9in)
Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.Size: 6 in.
The RIDGID Chain Wrenches has a sturdy, cast-iron housing with an I-beam handle and a double jaw that gives fast, ratchet-like action in either direction. It is ideal for use in close quarters. The heavy-duty models have replaceable alloy steel jaws.RIDGID C-36 Heavy-Duty Chain Wrench Size: 900mm (36in).Rated Pipe Capacity: 110mm (4.1/2in).Actual O.D. Capacity: 185mm (7.1/2in).Chain Length: 725mm (29in).Weight: 7.1kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.
The Ridgid Head Folding Pipe Stand has a locking ring that allows for quick vertical height adjustments. It has folding legs, making it easy to transport and requiring 70% less area to store. Suitable for use with threading machines, roll groovers etc. Specifications: Height adjustment: 70 - 134cm (28 - 53in).Max. pipe capacity: 300mm (12in).Max. weight capacity: 1,134kg (2,500lb).Weight: 21kg (47lb).
These RIDGID Top Screw Bench Chain Vices are fitted with a crank handle that is firmly anchored to the base of the vice. It also features a pipe rest and bender. The heavy-duty cast iron base has jaws especially designed for gripping and bending pipes.RIDGID BC410 Top Screw Bench Chain Vice Capacity: 6-100mm (1/8 - 4in).Weight: 6.7kg.
Universal Drain Rod and Tool Set.Complete with four tools, for clearing and cleaning drains. Contents:10 x 3/4 in x 3ft Blue Rods.1 x Clearing Wheel.1 x 4 in Drop Scraper.1 x 4 in Plunger. 1 x 2 in Double Worm Screw.2 x 12 in Straps.
IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4 in).
RIDGID Chain Tongs are designed and sized to provide extra leverage for the toughest jobs. All chains are tested to 2/3 of its breaking strength. Model 3215 is a single-end tong but all other models feature double-end jaw styles which can be reversed.RIDGID Chain Tong - Double Ended Total Length: 1,117mm (44in).Pipe Capacity: 33-168mm (1-6in).Chain Length: 813mm (32in).Chain Breaking Load: 9,117.0kg.Weight: 13kg.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series.Cutters are case hardened. The feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.
Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 737M No.5 Beechwood Lead Dresser.Face: 75 x 225mm (3 x 9 in).
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).
Monument automatic pipe cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any strain. Easy to use it cuts once the gate of the tool is closed over the pipe. Cuts in two directions. To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel. Replacement Wheel Number MONW15PC.Monument Automatic Copper Pipe Cutter. Size: 22mm.
Monument pipe cutter wheels are made from high quality, heat treated steels.Replacement Wheel to fit both the 15PC and 22PC Copper Pipe Cutters. Will also fit the 28PC 3415C and 3422Y pipe cutters.
The Monument 2117Q Pro Deburring Tool is ideal for deburring inside copper pipe. Its swivelling blade rotates freely to enable allsorts of deburring operations to be carried out on the inside of pipes, on sheet materials, inside holes etc. The blade is replaceable. The deburrer is suitable for use on steel, copper, brass, plastics, wood and castings.
