Monument Radiator Spanner Air Release Key made from steel, zinc plated valve spanner and air release key with a slightly offset handle. Size: 12mm (Double Ended).
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.
The Sievert Psi 3380 Portable Soldering Iron made from high quality titanium and aluminium and powered by a single disposable gas cartridge. It is flexible and ideal for many applications. The burner incorporates an effective windshield which totally encases the flame. It has piezo ignition, and the precise valve in the handle makes it easy to obtain the right heat for the copper bit. The ergonomic handle is comfortable to use. Supplied with a copper bit and 2 replacement gas cartridges. Work Time: 60 - 90mins with one cartridge.
Lockfast Drop Scraper glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.Size 150mm (6 in).
Arctic Hayes Classic 9g Smoke Cartridges are encapsulated in a polycarbonate plastic sheath. Perfect for testing air filters, fume hoods, air balancing and fans, as well as for use within mandatory testing of flues, chimneys, pipe and ductwork. White smoke can also be used for photography, special effects and more. Each cartridge supplies approximately 7m³ of dense smoke for 75 seconds. Supplied in a resealable plastic pack. Complies with BS 5440-1.
The Monument MON2059 2059M multi purpose four way key for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, central heating pump cocks, some radiator valves and drain off valves.
The Monument MON2050 2050L Gas Meter & Radiator Bleed Key for releasing the air which can appear in a radiator and for opening gas meter cupboards.Made in Britain from engineering plastic.
The Roughneck Pro Lead Dressing Set is supplied in a fabric roll with carry handle. Contains the following: 1 x Pro Lead Dresser No.2 is for flattening out sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and an air cushioned grip for a more secure hold and greater comfort during use. An integrated lanyard hole allows for safe and secure tethering when working at height. 1 x Pro Bossing Stick made for shaping and forming sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and an air cushioned grip for a more secure hold and greater comfort during use. With integrated lanyard hole for safe and secure tethering when working at height. 1 x Pro Lead Setting In Stick is for creating internal corners and folds in sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and an air cushioned grip for a more secure hold and greater comfort during use. With integrated lanyard hole for safe and secure tethering when working at height. 1 x Pro Lead Chasing Wedge made for sharpening folds in sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and a soft rubberised grip for a more secure hold and greater comfort during use. With integrated hand-guard for overstrike protection and a lanyard hole for safe and secure tethering when working at height.
The Bailey BAI1770 1770 Lockfast Universal Brass Clearing Wheel will help guide drain rods around difficult bends making it an ideal tool for removing minor blockages in sewage pipes by pushing any material clear.
Monument drain auger with a hollow spring 1/4in diameter wire cable with a bulbous head for unblocking sinks, urinals and small drains etc. The rotating crank handle with thumbscrew fits over and locks the cable. Can be entered through strainers.Can also be used without the handle as a refill for the MON3313. Length: 7.5m (25ft) long retractable.Diameter: 6mm (1/4 in).
Baileys Lockfast rods can be rotated in either direction and will remain secure in the most demanding conditions. The rods are manufactured from high grade polypropylene, complete with solid brass joints. The set contains the following: 10 x 3/4 in x 3ft Blue Rods.2 x 12 in Straps.1 x 4 in Plunger.1 x 2 in Double Worm Screw.
Bahco Pipe Slices are automatic tube cutters that fit directly over the pipe and cuts with a simple twist. They are compact in size, making them ideal for work in confined spaces. With orange painted zinc body.Size 15mm.
PlastiKote Trade Leak Detector Spray for the detection of leaks in gas pipes. It has a non-combustible, non-corrosive formula that can be removed with water.
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 100mm (4 in)
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Centre locking drain test plugs with steel plates, brass wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size: 100mm (4in).
Baileys Lockfast rods can be rotated in either direction and will remain secure in the most demanding conditions. The rods are manufactured from high grade polypropylene, complete with solid brass joints. These Rods are generally acknowledged as the best quality cleaning rods available which are specified on a world wide basis and are the preferred choice of professionals. Blue Rods® have earned an international reputation for their reliability, strength, rigidity and the right amount of flexibility.Size 3/4 in x 3ft.
The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3591 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: YellowPart No: 3591Dilution Rates Litres: 10-12,000
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 225mm (9in)
Monument White Tallow is the best quality, hard tallow used as a lubricant when threading conduit pipe and when pulling electric cables through conduit.1 x Monument 261P White Tallow 275g Tub.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Diameter range: 48-62mm. Maximum allowable back pressure: 37psi (2.50bar).1/2 in BSP outlet.
The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.Size 4 metre.
Sievert 8716 Neck and Valve Assembly for direct connection onto the Primus 2000 cylinder giving precise flame control. Back pressure valve to reduce the risk of flare up, it will accept burners of M8 x 0.75 thread from the Sievert Burner range 8725, 8719, 8720, 8842.
RIDGID Pipe and Bolt Dies for Machine Die Heads. Requires British model die head. Pipe dies for use in British Universal die heads (NOS. 504A, 811A, 815A, 816, 817, 856, 911 & 913).RIDGID Threading Machine Dies Size: 1 - 2in BSPT.Die Material or Type: Alloy RH.
High quality adjustable, copper pipe cutter tool that ensures a square even cut.All parts liable to wear are heat treated.For copper, brass, aluminium and polyethylene, the fluted handle contains a spare wheel.It also has an integrated pipe-deburrer. No.1. Capacity 4 to 28mm. Spare wheel number MON273.Capacity: 12 - 43mm.
Monument Disposable deburring tool. The swivelling blade rotates freely to allow allsorts of deburring operations to be carried out inside tubes, on sheet materials, inside holes etc. Suitable for use on steel, copper, brass, plastics, wood and castings.
Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 503D Spare Flat Tap Reseater Cutter 19mm (3/4in)
The Monument 4534X Grip+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G Grip plus shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access.
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.The Monument MON1377 1377W Drain Testing Plug comes with the following specifications:Size: 75mm (3 inch).Capable of sealing against pressures of up to 2.24 bar / 33 psi.
The IRWIN Record 200-30C Copper Tube Cutter is a compact and accurate cutter with steel wheel and roller mounted in precision die-cast body. Strong and lightweight, it is designed to cut copper, brass, aluminium or thin walled steel. Features a steel de-burrer, which folds into the body when not in use. A spare cutter wheel is located in the handle. Capacity: 3-30mm (1/8in - 1.1/8in) Copper Tube.
