Monument Pro Gas Torch is suitable for soldering and brazing of copper, brass and aluminium, and for use with propane and MAPP® gas. It has interchangeable tips. The Gas Torch features Piezo ignition for ease of use, and produces a hot turbine flame, which can be locked via a lock button. The size of the flame can be altered by an adjustable valve. An ergonomic hand grip improves user comfort.Monument 3475g Pro Gas Torch EN12205. Supplied with a Super Turbine Tip.
Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.Monument Plastic Pipe Cutter. Maximum Pipe Size: 60mm.
The Monument 2117Q Pro Deburring Tool is ideal for deburring inside copper pipe. Its swivelling blade rotates freely to enable allsorts of deburring operations to be carried out on the inside of pipes, on sheet materials, inside holes etc. The blade is replaceable. The deburrer is suitable for use on steel, copper, brass, plastics, wood and castings.
The Monument 2035Q ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm copper pipe. This puller simply engages with 14tpi thread of the compression fitting to remove the olive from the tube. With a 1/2in square drive for attachment to a ratchet. Made in Britain.
Monument Semi-Automatic Pipe Cutter enables 8-22 mm diameter copper and thicker walled plastic pipes such as those used in Central heating to be cut automatically once it has been sized and tightened. Thin walled plastic pipes may collapse too easily unless an internal support is given to pipes. After tightening no further adjustment or feeding of the wheel into the tube is required. Soft copper can also be cut without crushing if the tool is used like a conventional Cutter by feeding the wheel into the tube.Ideal for use in confined spaces. Capacity 8 to 22mm. Replacement wheel number MON301.
Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 75mm (3 in)
Monument Adjustable Fitted 2 Jaw Wrench (DIY) is an adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Round cross section steel handle with removable tommy bar. Size: 15 and 22mm (1/2 and 3/4 in).
The Faithfull PDRAUG25 is an easy to use drum auger that is designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage. The auger has a sturdy plastic body manufactured from PE and ABS wipe clean plastic and features both an integral winding and pistol grip handle that help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.
Designed for optimised performance on stainless steel tube, the Ridgid 65S cutter has a specially designed cutter wheel, with six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube. The cutter has a quick-acting mechanism, which rapidly adjusts to different sized tubing.An oversized, easy-to-grip knob allows for quick and easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut. Capacity: 6-65mm.
Designed for cutting plastic and metal tubing, this Ridgid cutter is quick-acting with an I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. It also features a fold-away reamer.Capacity: 6-66mm. Supplied with spare cutting wheel.
The RIDGID Stainless Steel Tubing & Conduit Cutter has been designed for optimised performance on Stainless Steel tubes. The cutter has a contoured frame that allows for easy alignment, even whilst adjusting the cutter to make a cut. It is fitted with an ergonomic, X-CEL knob that allows for easy and quick adjustments. There are six individual bearings in the 15-SI, that replace the traditional rollers. The bearings create a smoother cut, and allow for increased speed and reduced drag around the tube when cutting. Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: E-1525.Weight: 0.68kg.
The RIDGID Chain Wrenches has a sturdy, cast-iron housing with an I-beam handle and a double jaw that gives fast, ratchet-like action in either direction. It is ideal for use in close quarters. The heavy-duty models have replaceable alloy steel jaws.RIDGID C-18 Heavy-Duty Chain Wrench Size: 450mm (18in).Rated Pipe Capacity: 60mm (2.1/2in).Actual O.D. Capacity: 125mm (5in).Chain Length: 500mm (20.1/4in).Weight: 2.7kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.
Bahco 370-4 Chain Strap Wrench with high strength, positive grip for tightening big tubes without the removal of the chain. Length: 300mm (12in).Capacity: 110mm (4 1/4in).
The Faithfull Cranked Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. The cranked head allows access to heaters that are surrounded by insulation or recessed. Manufactured from high-quality steel.
Bahco Pipe Slices are automatic tube cutters that fit directly over the pipe and cuts with a simple twist. They are compact in size, making them ideal for work in confined spaces. With orange painted zinc body.The Bahco BAH306PACK twin pack contains sizes 15mm and 22mm.
The Sievert Turbojet Single Burner 360° Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5684 Universal Brush 200mm (8in)
Lockfast blue polypropylene drain rod setContents:10 x 3/4 in x 3ft Blue Rods.2 x 12 in Straps.1 x 4 in Plunger.1 x 2 in Double Worm Screw.1 x Clearing Wheel.1 x 4 in Drop Scraper.
Arctic Hayes Classic 3g Smoke Cartridges with an easy-to-use finger grip base. Perfect for testing air filters, fume hoods, air balancing and fans, as well as for use within mandatory testing of flues, chimneys, pipe and ductwork. Each cartridge supplies approximately 5m³ of dense smoke for 45 seconds. Supplied in a resealable plastic pack. Complies with BS 5440-1.Tub of 50 Arctic Hayes Smoke Cartridges Classic 3g White. White smoke can also be used effectively for photography, special effects and more.
The Ridgid 238-P Powered Soil Pipe Cutter cuts cast iron soil pipe quickly and easily in tight spaces. It is designed to cut to to 200mm (8in) soil pipe when driven by an impact driver (minimum 340Nm torque) or 100mm (4in) with the included ratchet. The 238-P is lightweight and - at only 6.1kg - it is easy to mount in difficult places. It has a compact design and low profile cutter wheels to fit into tight places in both overhead and below ground applications. The pipe cutter allows two-directional operation to allow scoring of the pipe for a clean cut. A patent pending torque limiter protects the tool from overloading. Capacity (Ratchet / Impact Driver): No-Hub Soil Pipe: 32-100mm / 32-200mm.Clay Pipe: 50-100mm / 50-200mm.Concrete Pipe: 100mm / 100-150mm.
The Bahco 9-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical securing chain and snap-hook. The key profiles are zinc die-cast for increased durability. The Master Key has 8 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a 5mm square key suitable for aerating radiator valves and a 1/4 inch magnetic bit holder. It has the following functions: 4 x Square: 5, 6, 7-8 & 9-10mm. 3 x Triangular: 7, 8-9 & 10-11mm. 1 x Two-way: 3-5mm. 1 x Half-moon: 6mm.
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 450mm (18in)
A deburring tool, designed to remove burrs from plastic, copper, aluminium and ferrous metal pipes.Style 316-2 includes two interchangeable blades stored in the body of the handle. Replaceable blade type.
Monument Professional Power Plunger comes with 3 adaptors which should fit most shower, bath, basin and bidet wastes just place over the waste that is blocked and pump the lever to pressurise the unit, it is also fitted with a pressure relief valve. When Pumping the MON2161 unit in situ, it will build up pressure which is then activated via the trigger to blast away the blockage.
The Record Irwin T850026 Plastic Pipe Cutter features a V shaped blade which allows for an off-centre motion, reducing tube deformation. The blade provides increased cutting pressure whilst remaining easy to use. The slicing motion of this specially hardened steel blade means that it is sharpened every time a cut is made. Capacity: 26mm.
The 302-35 tube cutter is capable of cutting diameters from 8mm to 35mm and can cut copper, bronze, aluminium and steel tubes. The heavy knob allows a fast adjustment from one diameter to another with the body in cast aluminium and the knob in cast aluminium covered with TPE to get a firm and comfortable grip.
The Arctic Hayes Plumbers Washer Kit contains a selection of rubber and fibre washers of the most popular sizes in a handy storage/carry case. Supplied with 12 pieces of each size: 16.5x6, 24x11, 19.5x5, 15.5x4, 12x4, 32x5, 19x10, 19x11, 24x15, 22x12, 18x15 & 24x20mm.
ROCOL RAPIDSEAL is a fluorescent yellow compound for use as a thread sealant on industrial metal pipework (including stainless steel) up to 3in diameter. Rapid-cure speed minimises down time in breakdown or repair situations It precision applicator improves working conditions and minimises waste. With a thread locking action that eliminates vibration induced loosening. Can replace traditional paste/hemp combinations. Suitable for use with stainless steel, glycol, etc. Meets requirements of EN 751 - 1. NSF P1 registered. Solvent free.
Knipex TubiX XL Pipe Cutter with a spring-loaded QuickLock mechanism, holds the tool on the pipe once locked in place. Its cutting wheel is made of high-grade ball-bearing steel. High-quality needle-bearings enable the cutting wheel and four guide rollers to cut with ease. The lightweight and durable aluminium housing incorporates a removable, precision-ground deburring tool. It Is quick and easy to replace the cutting wheel, no tools required, a spare cutting wheel can be stored in the handle.The Knipex TubiX XL Pipe Cutter is suitable for plumbing, heating and air conditioning: easily cuts gas and water pipes made of copper, brass and stainless steel. The Cutter is also handy for the electrical trade: it cuts rigid steel conduits and is useful for stripping steel wire armoured cables. Specification: Cuts Pipes: Ø 6-76mm (1/4-3in).Max. Wall Thickness: 2mm.
The RIDGID Chain Wrenches has a sturdy, cast-iron housing with an I-beam handle and a double jaw that gives fast, ratchet-like action in either direction. It is ideal for use in close quarters. The heavy-duty models have replaceable alloy steel jaws.RIDGID C-14 Heavy-Duty Chain Wrench Size: 350mm (14in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 125mm (5in).Chain Length: 460mm (18.1/2in).Weight: 1.2kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.
The Maun Olive Cutter Tool has been designed to quickly remove a compression olive, ring, or ferrule without damaging the copper pipe. Its high-quality steel cutting blades are hardened and tempered to HRC 45. They provide a reliable cut every time, with minimal hand pressure. Multiplies hand force by 15 times for less cutting effort. Its zinc-plated handles are fitted with soft plastic grips for added comfort and feature a reliable return-spring handle action. Ideal for professional plumbers, especially when moving radiators and serious DIYers tackling similar jobs. Comes with a standard 12-month warranty. Register your tool to extend this to 2 years. Made in England. 1 x Maun Olive Cutter Tool 22mm
Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator.Size: 4 in.
