A deburring tool, designed to remove burrs from plastic, copper, aluminium and ferrous metal pipes.Style 316-2 includes two interchangeable blades stored in the body of the handle. Replaceable blade type.
Knipex TwistCut Corrugated Pipe Cutter for cutting empty or ready-assembled corrugated pipes to length, with a diameter of 13-32mm. The recessed blades prevent injuries and provide an exact flush cut, without damaging the internal cables. Cut on the outside of fluting, no sharp raw edge inside the corrugated pipe. The body is made from a stable polyamide compound plastic. With a slim and ergonomic shape for work in poorly accessible areas. Double-sided guide for a precise cut. Simple insertion of the corrugated pipe for reliable and simple cutting, no waste. In the case of thick-walled corrugated pipes, reapply after the circular cut just behind the cut and break off the corrugated pipe. Ideal for use in the electrical and construction trades and for plumbing work. Specification: Length: 100mmCutting Capacity Ø: 13-32mm
The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification Capacity: 12-32mm (1/2-1.1/4in).Length: 240-425mm (10-17in).Weight: 1.2kg (2.5lbs).
This Ridgid 118 AUTOFEED® 2-in-1 Midget Cutter is designed for hard and soft copper, aluminium, brass and plastic tubing. It is ideal for use in restricted spaces on small diameter pipes. It is fitted with a feed assisting spring mechanism for controlled and automatic advance and has strong, lightweight slide and wheel housing.Capacity: 6-28mm.Supplied with spare cutting wheel.
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5687 Universal Brush 300mm (12in)
Universal type blue polypropylene drain rods set. Contains the following: 10 x 3ft x 3/4in Blue Rods.2 x 12in Straps.1 x 4in Plunger.1 x 2in Double Worm Screw.
The Record Irwin T850026 Plastic Pipe Cutter features a V shaped blade which allows for an off-centre motion, reducing tube deformation. The blade provides increased cutting pressure whilst remaining easy to use. The slicing motion of this specially hardened steel blade means that it is sharpened every time a cut is made. Capacity: 26mm.
IRWIN Record 202 Roller Pipe Cutter 50mm (2in) is a high quality robust cutter for all kinds of steel and cast iron pipe. Guaranteed against breakage with thin section specially hardened cutting wheel. Roller ensures cutter is set and kept square to the pipe and rolls down burr. Head includes safety stop to prevent the cutting wheel being damaged by the rollers. Capacity: 3 - 50mm (1/8 to 2in).
The RIDGID K-400 Drum Machine offers several unique, user-friendly features to make the toughest drain cleaning jobs easier and hassle-free. Designed with a sleek profile, the Model K-400 is a great fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies. The integrated transport cart allows for easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs. There is also an integrated telescoping handle that provides high-handle height during transport. It is fitted with AUTOFEED®, a patented, automatic cable feed that powers the cable in and out of the drain. Reverse the direction of the Autofeed and the cable feeds back into the drum A cable control system causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to the operator when blockages are encountered. Solid Core Cable uses a tough 3⁄8in (10mm) Integral Wound (IW) cable that is rugged and kink resistant. Comes with 1 x C-32IW 3/8in (10mm) x 75ft (23m) Integral Wound Solid Core Cable, 1 x Pair of Gloves, 1 x T-260 Tool Kit (T-202 Bulb Auger, T-205 C Cutter, T-211 Spade Cutter & A-13 Pin Key) and 1 x AUTOFEED® Attachment. Specification Input Power: 380 Watt, 230/240 Volt. Cable Spin Speed: 165 RPM.Drum Capacity: 3/8in (10mm) Diameter Cable: 100ft (30.5m). Length: 24in (61cm).Height: 23in (58.5cm).Width: 17in (43.2cm).Weight Machine Only: 20.4kg.Cable Weight: 11.8kg.
These RIDGID Top Screw Bench Chain Vices are fitted with a crank handle that is firmly anchored to the base of the vice. It also features a pipe rest and bender. The heavy-duty cast iron base has jaws especially designed for gripping and bending pipes.RIDGID BC210 Top Screw Bench Chain Vice Capacity: 6-60mm (1/8 - 2.1/2in).Weight: 3.5kg.
Inflatable rubber bladder with canvas protective case which can be used for blocking off pipes during maintenance and similar applications.Supplied with 1/4 in brass tap and 1.8 metres (6 ft) of tubing.Size. 100mm (4 in)Max inflation pressure 0.68 bar / 10 psi
The Roughneck Pro Bossing Stick is made for shaping and forming sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and an air cushioned grip for a more secure hold and greater comfort during use. With an integrated lanyard hole for safe and secure tethering when working at height.
The Sievert 8710 Soft flame burner is designed for cable shrinking and heating jobs. It produces a wind stable soft flame. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 24mm.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.
The Sievert Turbojet Twin Burner 360° Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.
Bahco Pipe Slices are automatic tube cutters that fit directly over the pipe and cuts with a simple twist. They are compact in size, making them ideal for work in confined spaces. With orange painted zinc body.Size 12mm
The Roughneck Pro Lead Setting In Stick is made for creating internal corners and folds in sheet lead, copper, zinc and aluminium. Tough, impact resistant polypropylene construction ensures a longer working life and an air cushioned grip for a more secure hold and greater comfort during use. With an integrated lanyard hole for safe and secure tethering when working at height.
Monument Drain Cutter & Beveller is suitable for use by right or left-handed users. It will cut and bevel plastic soil and drain pipes as short as 100 mm. Removal of the leg enables the cutter to be used in a confined space or alternatively screwed or bolted to a heavy board or timber on muddy sites. Supplied complete with a replaceable long-life steel cutting blade. For cutting and bevelling 110 mm plastic soil and drain pipes.
The Monument 4501F Grip+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.
