Monument Basin Wrench for fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths. Manufactured from strong malleable material, and correctly machined jaws to fit standard back nuts 1/2 and 3/4in BSP. The offset design allows you to reach behind sinks & baths easily Overall Length: 260mm
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5685 Universal Brush 225mm (9in)
The Sievert 2295 Easyjet Gas Torch has a unique 1 bar regulator for cartridge pressure control. A fixed medium burner is supplied with the torch and modifications help prevent flare ups when used upside down. It has precise flame adjustment and comes supplied with a 2204 cartridge Propane/Butane mix. It has a 0.9 Kw output for soldering up to 22mm pipe. It will fit EN417 self sealing cartridges and is very compact when used with a 2203 cartridge.
The Monument 781T DIY telescopic adjustable basin wrench is designed for use when tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Extends from 25 - 43cm
The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).
Monument Radiator Spanners Twin Pack with 1 x 10mm and 1 x 12mm square section radiator spanners. Suitable for vent plugs and bleed screws. They are made from zinc plated steel with a slightly offset handle for ease of use.
Monument air testing U-gauge kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4 in) water gauge pressure on any size of drain or pipe. Kit contains: U-Gauge, hand bellows pump, 1/2 in and 1 in BSP nipple caps, tee piece, 3 x 600mm lengths of rubber hose. The kit is housed in a display box with full instructions.
Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools.1 x Monument 501X Spare Flat Tap Reseater Cutter 16mm (5/8in)
The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in body, use parallel bush series.Cutters are case hardened, feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits 1/2in and 3/4in BS5412 bevelled seats. Complete with 17, 20 mm (11/16 in, 13/16 in) Bevelled Cutters. One double bush.
The Monument 4501F Grip+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.
The MON2116N cleans and deburrs 4 different sizes of plastic waste pipe, it is a high quality metal square with each side de-burring a different size of plastic pipe.Will deburr these sizes: 19mm (3/4in), 32mm (1.1/4in), 38mm (1.1/2in) and 50mm (2in). Includes a handy hanging hole and is made in Britain.
Deburring tools are designed to remove burrs from plastic, copper, aluminium and ferrous metal pipes. Model 316-1 is a fixed pen style tool with a single blade.
Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has a easy to read triple scale bar in psi and kPa scales and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems. Can be left on test, while flooring is laid to reveal any nail damage also test hot and cold supplies separately to ensure pipes are not crossed. The Monument 1512 is fitted with a Schrader Valve and 15 mm push fit fitting for quick and easy assembly and has a rubber boot for added protection.
The Stanley 0-70-450 plastic pipe cutter cuts up to 28mm plastic pipe and can also be used for hose, conduit and edge trim. The Stanley plastic pipe cutter has the following features:Precision stainless steel blade;Durable moulded resin body.
The Sievert 8708 Hot Air Burner has been designed for shrinking and paint stripping. It produces a powerful, wind stable hot-air stream. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 38mm.
The Arctic Hayes ZE Spray Pipe Freezer Aero is the safe and professional way to extend or repair pipework in minutes, without draining down or turning off the mains. Allows you to freeze pipes in as little as 2 minutes. Suitable for copper, steel, stainless steel, plastic, lead and iron pipes. It has a non-flammable formula that is also kinder to the environment, with low global warming potential gas. Saves time and money. Arctic Hayes ZE Spray Pipe Freezer Aero Small. Freezes pipes 8-15mm in diameter, for up to 40 minutes.
The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle. The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders. Made in Britain.
The Sievert Turbojet Twin Burner 360° Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.
These Faithfull basin wrenches have adjustable spring action jaws that maintain an automatic grip on pipe fittings. The forged steel jaws turn 180° for greater flexibility. Essential tool for use on compression fittings, copper or polythene, on basins and baths.1 x Faithfull Adjustable Basin Wrench 6mm - 25mm
Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.Monument 2644Q Plastic Pipe Cutter. Maximum Pipe Size: 28mm.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.The Monument Autocut Twin Pack contains the following: 1715C: Size: 15mm.1722Y: Size: 22mm Not for use on stainless steel. Spare wheel to fit is available MON269.
The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.
The Stanley STA0-70-451 mini tube bender is designed for precise bends on 6, 8 and 10mm copper pipe. It has a die cast body for strength and durability, knurled non-slip grips and clear graduations for accurate bends.
The Monument Olive Cutting Tool is designed to remove an olive from copper pipe without damaging the pipe and without producing swarf/debris. NOTE: DO NOT attempt to remove stainless steel olives with this tool. Made in Britain.1 x Monument 2033K Olive Cutting Tool 10mm
Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material. 2350 Made from woven glass fabric (professional quality).2351 Made from HDW graphite material (professional quality).Monument 2350X Soldering & Brazing Pad resists temperatures up to 600º celsius, and does not present any of the hazards associated with asbestos material. Made from woven glass fabric (Professional quality). Size: 300mm² (12in²).
Rocol HYLOMAR JOINTING Compound is a non-setting jointing compound for flanged joints. It forms a permanent but flexible seal that resists vibration and thermal expansion. Non-setting, non-hardening sealantResists vibration & thermal expansionSuitable for pressures up to 35 bar (500psi)Temperature range of -50° C to +250° C Size: 100g tube.
This Faithfull Plastic Pipe Cutter is a handy non-ratcheting plastic pipe cutter, designed for quick and repetitive cutting when installing flexible plastic water pipe up to 28mm. The body of the cutter is manufactured from a hard-wearing Nylon and fitted with a high-performance 53HRC steel blade, to provide an easy clean cut each time. This lightweight tool is ideal for carrying around all day and features a safety lock when stored on a tool belt or work trousers. Capacity: 3-28mm.
Monument galvanised steel wire with gripping handle for clearing sink, shower and bath wastes.Monument 909L Waste Cleaner. Size: 6 x 1.8m (1/4 in x 6ft).
The Sievert 8707 Cyclone Burner has been designed for brazing and soft soldering. It produces an intensive and effective short flame that reaches around the pipe. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 16mm.
Monument 15mm and 22mm copper pipe bender is also capable of bending 15mm stainless steel pipe. Tubular steel handles and a die cast formers, it comes supplied with 15mm and 22mm guides.
The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument MON1715 Autocut Pipe Cutter. Size: 15mm.
