The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel.Monument MON1715 Autocut Pipe Cutter. Size: 15mm.
Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process, this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor, 1/2-inch square drive, extension tube and full user instructions. For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the tap tail. Uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Monument Stiffnuts Professional Boxed Kit. 1/2-inch. and 3/4-inch. BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. Complete with 3/8-inch. Cordless drill adaptor, 1/2-inch. Square Drive; Extension tube and full instructions.
The Monument hydro-jet pump safely provides the explosive power of a water jet to unblock sinks, baths, showers, toilets and drains. First you fill the unit with water then hold the unit over the waste and pump down (or hit) the handle to create a powerful water jet to help clear any blockage. To clean the MON1452 simply just flush with clean water. Size: 35cm x 7cm x 7cm.
Ratchet action PVC pipe cutter ideal for PVC, aluminium or plastic pipes, gas pipes, electrical appliance pipes and other plastic pipeline.Maximum working size: 42mm.
The Arctic Hayes Tap Washer Kit contains a large selection of washers that are ideal for general plumbing. The washers are made from fibre and are supplied in a compartment case for easy identification. Contains the following: 55 x Vacca Flat Washers: 3/8in, 1/2in, 5/8in & 3/4in. 15 x Vacca Dome Washers: 1/2in & 3/4in. 30 x Dome Delta / Arm Washers: 1/2in & 3/4in. 20 x Tantofex Tap Washer: 1/2in & 3/4in. 50 x Cap & Lining Fibre Washers: 1/2in & 3/4in.
Monument pipe cutter wheels are made from high quality, heat treated steels.Replacement Wheel to fit both the 15PC and 22PC Copper Pipe Cutters. Will also fit the 28PC 3415C and 3422Y pipe cutters.
The Arctic Hayes Smoke-Sticks™ Kit is the first product on the market offering a pencil thin smoke pattern. The smoke is non-corrosive and not harmful. Ideal for testing for the slightest air-movement, gas spillage. Also for mandatory CO spillage checks of boiler/case sills after fitting/re-fitting and HVAC air-movement/leakage checks. The Smoke-Sticks™ Kit comes with 3 Smoke-Sticks™ providing up to 3 hours of controllable smoke. Refill pack also available.1 x Arctic Hayes Smoke-Sticks™ Refill Pack of 3
Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series.Cutters are case hardened. The feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.
The Monument ratchet handle to suit automatic and autocut pipe cutters. Ideal for use when space is limited it fits where hands or pliers cannot. Made from bright zinc plated stock.The Monument MON15R suit 15PC Automatic Pipe Cutter and 1715 pipe cutters.
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5689 Universal Brush 400mm (16in)
Monument Compression Fitting Spanner double ended spanner for tightening and loosening most 15 and 22 mm compression fitting nuts. Size: 15/22 mm.Twin Pack of Compression Fitting Spanners 15/22mm.
Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general purpose. Head length: 10mm.Total length: 195mm. Pack of 3 + 2 Free.
Monument pipe cutter wheels are made from high quality, heat treated steels.Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm. Pack colour. Red. Packs are colour coded according to use.
Monument heavy-duty Compression Fitting Spanner is double ended has 24mm and 32mm ends for 15 and 22mm compression fitting nuts. Conforms to DIN 895 standards.
The Faithfull Plumber's Soldering Pad is a high temperature, asbestos free protective heat pad for plumbing, brazing and soldering applications. Ideal for professional soft soldering, brazing and most other plumbing applications, this heavy-duty heat pad will provide protection to surfaces against burn marks and heat damage. For best results always insure the white side of the pad is facing towards the heat source and avoid direct flame contact with the surface of the pad for prolonged periods. If the surface of the pad begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. The pad also features an easy wipe clean back and has reinforced edging. Recommended for use with Butane, Propane and MAPP gas. Size: 195 x 300mm.Withstands temperatures of up to 1,200°C.
The Monument MON1368 1368U 2 Piece Test Plug Set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. They cannot be used for air testing purposes by themselves. 2 Plugs supplied: 1 x 1370B 15mm Test Plug. 1 x 1371E 22mm Test Plug.
Monument pipe cleaning tool is the very best and safest way to prepare copper pipe and copper fittings and comes in 15mm and 22mm cutting sizes. Long-lasting double stemmed brushes clean quickly. Quick thorough tubing prep with patented tungsten carbide abrasive technology, they work 3x faster and last 4x longer than conventional tools. Patented ratchet handle makes jobs possible in tight spaces. Eliminates the risk of scrapes or flux burns.Monument MON2922 Copperkey Pipe Cleaning Tool
This Monument AC4P Autocut® Plastic Waste Pipe Cutter is suitable for 1.1/4in Push Fit and Solvent Weld waste pipe. Whilst nominally called 1.1/4in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 30mm I.D. inner diameter to 36mm O.D. outer diameter.
This Monument AC4P Autocut® Plastic Waste Pipe Cutter is suitable for 1.1/2in Push Fit and Solvent Weld waste pipe. Whilst nominally called 1.1/2in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 37mm I.D. inner diameter to 43mm O.D. outer diameter.
The Wiha Pen Shape Switch Cabinet Key contains the most popular keys and profiles in one compact, lightweight tool. A handy clip means you can easily store the key in/on a pocket. Specification: Keys/Profiles: Sqaure Head 5-8, Triangle Head 9, Double Bit (Min.-Max.) 3-5, SL7.0mm, PH2, T20 & T25.
The KNIPEX BiX Clever Pipe Cutter cuts pipes quickly, cleanly, and without shavings. It fits comfortably in the hand with a locking mechanism for safe transport. This Knipex product cuts high-temperature plastic drain pipes, and electrical conduits in next to no time. The cutter can be used to cut sealing sleeves during final assembly, close to the wall, and is standard-compliant. Fitted with a rotatable knife block for cutting plastic pipes, the blade is in the middle, and sealing sleeves with the blade on the outside. Two spare blades are integrated in the tool. Specification: Capacity: HT & Plastic Pipes: Ø 20-50mm, Sealing Sleeves: Ø 20-50mm.
The Faithfull Multi-Function Gasket & Pipe Mitre Shears are designed to cut cleanly and precisely through plastic and rubber. They can be used for cutting rubber gasket, plastic conduit and trunking, window and door seals, decorative trim strips and tile sealing strips. The kit contains a pair of shears with a stainless steel blade and 5 interchangeable aluminium lower jaws. The chrome-plated steel body is fitted with comfortable PVC handle grips and a safety lock. Supplied in a robust plastic storage case with the following jaws: 1 x 17mm & 20mm Pipe Cutter Head for cutting plastic conduit. 1 x 27mm Pipe Cutter Head for cutting plastic conduit. 1 x Triangular Head for cutting square conduit and sealing strips. 1 x Slotted Head for general cutting of rubber and plastic gaskets. Max. Cutting Width: 50mm. 1 x Angle Mitre Head for cutting accurate mitres. Marked with 45°, 60°, 75°, 90°, 105°, 120° angles and graduated to 50mm and 2in.
Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 734D No.2 Beechwood Lead Dresser Face: 50 x 175mm (2 x 7 in).
The Faithfull PDRSNAKE is a labour saving drill auger (snake) designed for use on any variable speed electric or battery drill which is capable of holding a 1/4in hex shank. The auger is easy to use and will remove most types of blockages from household pipes and drains up to 50mm (2in) in diameter. It is ideal for clearing basins, sinks, baths and waste pipes when plungers and chemicals fail to work. The 4.6m 15ft x 6mm/1/4in steel cable is encased in a wipe clean PE sleeve that allows the inner cable to spin freely when attached to a rotary drill, a built in clutch will automatically engage if the cable becomes jammed. Effective length: 4.6m (15ft).No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.
Quick and easy to use and can be used one-handed in confined spaces which eliminates external burrs. The are manufactured from aluminium alloy steel and supplied with one spare cutter wheel.Adjusts automatically to fit 15 mm copper pipe.
The Monument 2036T ;Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives. Made in Britain.
The Monument OMAT® Soldering Mat is a patented cut out mat for soldering copper pipes from 15-22mm in diameter. It reduces the risk of fire, and its unique shape with overlap gives a tight and secure fit. Unlike conventional soldering mats the OMAT® wraps around the pipe offering complete protection to the surrounding surfaces. The OMAT® is constructed from a woven glass fabric and does not present any of the hazards associated with asbestos materials. Additionally, it is stitched all around and will resist temperatures up to 600°C.The Monument 2363L OMAT® Soldering Mat has the following specifications: Size: 150mm² (6in²).Pipe Capacity: 15-22mm.
