The McAlpine T23 is a blank cap fitting that is designed to seal off the end of a pipe or fitting. The T23 blank cap is part of the BSP range of plumbing fittings and pipes made by McAlpine.
The T23 blank cap features a BSP thread on the inside of the cap, which allows it to be screwed onto a pipe or fitting with a corresponding BSP thread. The cap also features a nut, which can be tightened to provide a secure and watertight seal.
The T23 blank cap is made of durable plastic, which is lightweight and corrosion-resistant, and is suitable for use in a range of plumbing applications, including domestic and commercial installations. It's important to note that the T23 blank cap is designed specifically for use with the McAlpine BSP system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T23 blank cap is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine T12E is a coupling fitting that connects a 1 1/2-inch female BSP (British Standard Pipe) threaded pipe to a 2-inch male BSP threaded pipe. This coupling is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
It's important to note that BSP threads are used primarily in Europe and Asia, while the US typically uses NPT (National Pipe Thread) or NPS (National Pipe Straight) threads. Therefore, if you are in the US or another country that primarily uses NPT or NPS threads, you may need to use an adapter or different type of fitting to connect your pipes.
・ Available in 9 sizes
・ Waste Outlet Reducer
The McAlpine STW8B-95 is a 50mm water seal shower trap with a universal outlet. It is designed to be used in conjunction with standard 1½" UK plumbing and is suitable for use with most shower trays and enclosures.
The water seal on the STW8B-95 trap prevents foul odours from escaping from the drainage system, while the universal outlet ensures that it can be connected to a variety of waste pipes. The trap is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install.
The STW8B-95 shower trap features a brass body and chrome-plated cover, which gives it a stylish and modern appearance. The low profile design of the trap makes it ideal for use in shallow shower trays, while the removable trap body makes it easy to clean and maintain.
Overall, the McAlpine STW8B-95 shower trap is a reliable and effective solution for preventing foul odours from escaping from the drainage system. Its universal outlet and stylish design make it a versatile option that can be used in a wide range of shower trays and enclosures, while its high-quality construction ensures that it will provide long-lasting performance.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
The McAlpine STW85CPB is a standard waste designed to be used with McAlpine STW 1½" shower traps. The waste is made from high-quality materials and is designed to be durable and long-lasting.
The STW85CPB waste is designed to be used with a range of plumbing systems and is easy to install. It features a standard 1½" outlet size and can be connected to a variety of different waste pipe configurations.
The waste is an essential component of any shower installation, helping to ensure that water drains effectively and prevents any blockages or unpleasant odors from entering the bathroom.
Overall, the McAlpine STW85CPB Standard Waste for STW 1½" Shower Traps is an excellent choice for anyone looking for a reliable and durable waste solution for their shower. Its compatibility with a range of plumbing systems and easy installation make it a popular choice among plumbers and homeowners alike.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
The McAlpine STW7-RB is a 19mm water seal shower trap with a universal outlet. It is similar to the STW7-M, but features a removable bottom section for easy cleaning and maintenance.
The STW7-RB is made from high-quality materials and is designed to be durable and long-lasting. It features a 19mm water seal to prevent water from flowing back into the shower and helps prevent any unwanted odors from entering the bathroom.
The universal outlet design of the trap allows it to be easily connected to a variety of different waste pipe sizes and configurations, making it a versatile option for any shower installation. The removable bottom section allows for easy access and cleaning, ensuring that the trap remains effective and free from blockages.
Overall, the McAlpine STW7-RB 19mm Water Seal Shower Trap with Universal Outlet is an excellent choice for anyone looking for a reliable and easy-to-maintain shower trap solution. Its removable bottom section makes it particularly well-suited for installations where access is limited or regular cleaning is required.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
The McAlpine STW70CPB is a standard waste fitting designed to be used with McAlpine STW 1½" shower traps. It is designed to be installed between the shower tray or bathtub and the waste pipe and connects to the trap using a compression fitting.
The waste fitting is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and comes with a removable grid for easy access and cleaning.
The STW70CPB is designed to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any potential for standing water or blockages in the drain. It is also designed to be compatible with a variety of plumbing systems, making it a versatile solution for most bathrooms.
Overall, the McAlpine STW70CPB Standard Waste for STW 1½" Shower Traps is a reliable and efficient solution for ensuring that your shower or bathtub remains free from standing water and blockages. It is a great addition to any bathroom using a McAlpine STW 1½" shower trap.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
The McAlpine STW50-TUBE is a dip tube designed to be used with McAlpine STW 1½" shower traps. The dip tube is made of high-quality plastic and is designed to fit inside the trap to prevent debris and hair from entering the drain system. The dip tube also helps to create a water seal, which prevents odors from escaping through the drain.
The McAlpine STW50-TUBE is an important component of the McAlpine STW 1½" shower trap system, as it helps to maintain the proper function of the trap. It is recommended to replace the dip tube periodically to ensure that it is functioning properly and to prevent blockages in the drain system.
Overall, the McAlpine STW50-TUBE is an essential component for the McAlpine STW 1½" shower trap system, ensuring that the trap is functioning properly and preventing blockages in the drain system.
・ Available for 19mm, 50mm and 80mm Shower Traps
・ Suitable of use with STW range of 1½" Shower Traps
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine STW12-M is a resealing shower trap designed to prevent unpleasant odors and gases from entering the bathroom through the waste pipe. It has a water seal of 80mm and a multifit outlet, which can accommodate various plumbing configurations.
The resealing mechanism of the trap ensures that the water seal is maintained even if the trap dries out or the water in the trap evaporates. This prevents foul smells from entering the bathroom and also prevents the build-up of harmful gases such as methane and carbon monoxide.
The trap is easy to install and comes with a removable trap body, making it easy to clean and maintain. The white finish on the plastic components gives it a clean and polished look, which is suitable for modern bathrooms.
Overall, the McAlpine STW12-M is a reliable and effective option for shower installations that require a resealing trap to prevent unpleasant odors and gases from entering the bathroom. Its multifit outlet also allows for easy installation in various plumbing configurations.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 80mm Water Seal
・ 1½" Outlet
・ Waste grid and dip tube removable to facilitate easy cleaning
The McAlpine ST90WH10-HP2 is a high-performance shower trap designed for use with 1½" waste pipe connections. It has a water seal of 90mm x 50mm, which provides an effective barrier against unpleasant odors and gases from the drainage system.
The high-flow design of the trap allows for quick and efficient drainage, ensuring that water does not accumulate in the shower tray. The trap also features a removable 110mm flange, which makes it easy to clean and maintain.
What sets the ST90WH10-HP2 apart from other McAlpine shower traps is that it has a white finish on its plastic components, giving it a cleaner and more polished look in comparison to other models that have exposed black plastic components.
Overall, the McAlpine ST90WH10-HP2 is a reliable and effective option for any shower installation that requires a 1½" waste pipe connection, providing both performance, aesthetics and convenience.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine ST90CPB-P-HP is a high-performance shower trap designed for use in plumbing installations where a high flow rate is required. The trap has a 90mm water seal and a 50mm outlet, which is compatible with 2" pipework. The trap features a removable 110mm flange, making it easy to access and clean.
One of the key features of the ST90CPB-P-HP is its high-performance design. The trap has been engineered to provide a high flow rate, making it ideal for use in showers and other applications where a large volume of water needs to be drained quickly. This is achieved through a combination of factors, including the size and shape of the trap and the materials used in its construction.
The trap is also designed to be easy to install, with a universal outlet that can be connected to a wide range of pipework. The removable flange makes it easy to access the trap for cleaning and maintenance.
Overall, the McAlpine ST90CPB-P-HP is a high-performance shower trap that is designed to provide excellent performance and durability in a range of plumbing applications. Its high flow rate and easy installation make it an ideal choice for anyone looking for a high-quality shower trap.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 2" Universal
The McAlpine 1 1/4" BSP Nut S8A is a plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "BSP Nut" designation refers to the type of threading on the fitting, which is designed to connect to other components with BSP threading.
The "S8A" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" BSP Nut S8A is a specific plumbing fitting that may be useful in certain waste and drainage systems where a threaded connection is required to connect pipes or other plumbing components.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine 11/2" Backnut Washer Pww2 is a plumbing component that is used to create a watertight seal between the backnut and the waste pipe in a plumbing system. Here are some of its features:
Size: The backnut washer has a diameter of 1.5 inches (11/2") and is designed to fit backnuts with a matching diameter.
Material: The washer is made of high-quality rubber material that is durable and resistant to wear and tear.
Watertight seal: The main function of the backnut washer is to create a watertight seal between the backnut and the waste pipe. This prevents water leaks and ensures that the plumbing system is working efficiently.
Easy to install: The backnut washer is easy to install and can be used in both residential and commercial plumbing systems.
Overall, the McAlpine 11/2" Backnut Washer Pww2 is a reliable and efficient plumbing component that is designed to create a watertight seal between the backnut and the waste pipe. It is made of high-quality rubber material and is easy to install, making it a popular choice for plumbers and DIY enthusiasts alike.
The McAlpine OBT1V 75mm Water Seal Adjustable Inlet Offset Basin Trap is a plumbing component designed to connect a basin to a waste pipe. This trap is adjustable to suit different installations and features a 1¼" universal outlet that can be connected to a waste pipe.
The trap has a 75mm water seal that prevents foul odours from entering the building and maintains the water seal even when the trap is not in use. The offset inlet allows for flexibility in installation and can be adjusted to suit different plumbing configurations.
The OBT1V trap also features a removable anti-syphon (Silentrap) valve that prevents backflow and eliminates gurgling noises that can occur when water flows through the trap. The valve can be easily removed for cleaning or maintenance purposes.
The trap is made from high-quality materials, ensuring that it is durable and long-lasting even in challenging plumbing environments. The trap has a sleek and modern design that complements the basin and provides a seamless appearance.
Overall, the McAlpine OBT1V 75mm Water Seal Adjustable Inlet Offset Basin Trap is a reliable and practical plumbing component that can help you to maintain the cleanliness and functionality of your plumbing system. Whether you are working on a large-scale plumbing project or a small DIY job, this trap can help you to ensure that your plumbing connections are secure and leak-free while keeping your system free from unwanted debris and odours.
・ 75mm Water Seal
・ 1¼" Universal Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Anti-Syphon Valve is removable for cleaning purposes
The McAlpine BSW10PR 1½" Centre Pin Sink Waste is a plumbing component designed to connect a sink or basin to a waste pipe. This waste is designed with a 70mm stainless steel flange that is designed to fit over the sink or basin outlet and provide a secure and leak-free seal. The flange also provides a sleek and modern appearance to the sink or basin.
The centre pin design of the BSW10PR allows for easy installation and removal of the waste plug. The waste plug is included with the waste and features a black PVC handle for easy removal and maintenance.
The BSW10PR is suitable for use with sinks or basins with a 1.1/2" BSP (British Standard Pipe) outlet. The waste is made from high-quality materials, ensuring that it is durable and long-lasting even in challenging plumbing environments.
Overall, the McAlpine BSW10PR 1½" Centre Pin Sink Waste is a reliable and stylish plumbing component that can help you to connect a sink or basin to a waste pipe. Whether you are working on a large-scale plumbing project or a small DIY job, this waste can help you to ensure that your plumbing connections are secure and leak-free while maintaining a modern and sleek appearance. The black PVC handle plug also adds a touch of style and makes it easier to remove and clean the waste.
・ 1½" BSP
・ Black PVC handle plug
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The 70mm polished stainless steel flange eliminates the problem of chrome plating deterioration
・ Manufactured in Polypropylene
McAlpine 3"/75mm MAC-EXTC is an adjustable length straight extension WC connector designed to extend the distance between a toilet pan and a soil pipe. The adjustable length feature of the extension piece allows it to be adjusted to fit the required length, which means that it can be used in a wide range of installation situations. The extension piece is easy to install and can be fitted quickly without the need for any special tools or equipment.
The MACFIT technology used in the McAlpine MAC-EXTC connector makes installation quick and easy. The connector simply pushes into the soil pipe and onto the toilet pan without the need for any tools or additional sealing materials. This helps to save time and effort during installation and ensures a secure and watertight connection.
Overall, the McAlpine MAC-EXTC is a reliable and easy-to-install WC connector that can provide a flexible solution to many toilet installation scenarios requiring an adjustable length straight extension.
・ Available for 3"/75mm, 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ Adjustable Length
・ White colour to match sanitaryware
・ Complies with BS 5627:1984
・ Manufactured in EVA, a soft, durable, flexible plastic material
The McAlpine WC-CON8F-BTW is a flexible WC connector designed for back-to-wall WC pan installation in a horizontal position. It has an inlet diameter of 97-107mm and a 90° bend to accommodate different angles of installation. The connector is made of high-quality materials that are durable and resistant to damage caused by chemicals and waste.
The flexible nature of the connector allows it to be bent and adjusted to fit the unique requirements of your installation, making it a versatile option for use in different bathroom setups. The McAlpine WC-CON8F-BTW is designed to provide a watertight seal between the WC pan and the soil pipe, ensuring that there are no leaks or odors escaping from the toilet.
Overall, the McAlpine WC-CON8F-BTW is a reliable and efficient WC connector that is suitable for use in back-to-wall toilet installations in a horizontal position.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
The McAlpine M/Fit 1 1/2" 95 Deg Bend X Bsp Coupling Nut is a plumbing component used in the installation of drainage systems. Here's what each of these terms mean:
McAlpine: McAlpine is a brand that produces plumbing products, including pipes, fittings, and traps, that are used in the construction and maintenance of drainage systems.
M/Fit: M/Fit is a type of fitting made by McAlpine that is designed to connect pipes with different diameters. It is a compression fitting, meaning that it uses pressure to hold the pipes together.
1 1/2": This refers to the diameter of the pipe that the fitting is designed to connect. In this case, it is a 1 1/2" diameter pipe.
95 Deg Bend: This refers to the angle at which the pipe will bend when this fitting is installed. In this case, it will bend at a 95 degree angle.
BSP: BSP stands for British Standard Pipe, which is a type of thread used in plumbing fittings in the UK. It is designed to create a tight seal between the fitting and the pipe.
Coupling Nut: This is the part of the fitting that connects the pipes together. It is a nut that screws onto the threaded end of the fitting, securing the pipes in place.
・ Available in 1¼" and 1½" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine FPKIT-3 WC Frame Connector Kit is a set of components designed to connect a toilet bowl (WC) to a drainage system. The kit includes the following parts:
WC Connector with 90mm plain end: This is a plastic pipe that connects to the bottom of the toilet bowl and allows waste to pass through to the drainage system.
110mm outlet seal: This is a rubber gasket that fits onto the end of the WC Connector and provides a tight seal to prevent leaks.
Flush pipe with finned seal connector: This is a plastic pipe that connects the WC Connector to the drainage system. It has a finned seal connector that fits tightly into the drainage pipe.
Fixing bolts and caps: These are the screws and caps that are used to attach the WC Connector and flush pipe to the toilet bowl and the drainage system.
Overall, the McAlpine FPKIT-3 WC Frame Connector Kit provides all the necessary components for a secure and leak-free connection between a toilet bowl and a drainage system.
・ Suitable for in-wall WC frames
The McAlpine WC-CON6 is a rigid WC connector that is designed to connect a toilet bowl to a 110mm soil pipe with a plain end outlet. The connector has an adjustable length of 97-107mm, making it suitable for a variety of toilet bowl sizes.
The connector also has a 10mm offset, which means it can be installed at a slight angle to help with the installation of the toilet. This can be particularly useful if the soil pipe is not in the ideal location for the toilet installation.
The McAlpine WC-CON6 is made from high-quality materials, ensuring that it is durable and long-lasting. It is also easy to install and can be used with a variety of toilet bowls and soil pipes.
Overall, the McAlpine WC-CON6 is a reliable and versatile WC connector that is well-suited for a range of toilet installations.
・ Available with finned outlets for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
The McAlpine WC-CON5 is a type of rigid WC connector that is designed to connect a toilet pan to a soil pipe with a 97-107mm inlet and a 20mm offset. The connector is adjustable in length to accommodate different installation requirements.
Here are some additional details about the McAlpine WC-CON5:
It is made from high-quality materials that are durable and resistant to corrosion and other forms of damage.
The connector has a unique shape that allows it to fit securely and snugly between the toilet pan and soil pipe, ensuring that there are no leaks or other issues.
The adjustable length feature allows for flexibility in installation, which can be particularly useful in situations where the soil pipe is not in the ideal location.
The 20mm offset is designed to provide extra space between the toilet pan and the soil pipe, which can be useful in situations where there are space constraints or where the soil pipe is not located directly behind the toilet pan.
The McAlpine WC-CON5 is compatible with most standard toilet pans and soil pipes, making it a versatile and reliable choice for a wide range of installation scenarios.
Overall, the McAlpine WC-CON5 is a high-quality, reliable WC connector that is designed to provide a secure, leak-free connection between a toilet pan and a soil pipe. Its adjustable length
・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
The McAlpine CAP100 is a temporary blanking off cap that is designed for use with 110mm diameter soil pipes. It is used to temporarily seal off a soil pipe during construction or maintenance work.
The CAP100 is made from durable and long-lasting materials, ensuring that it can withstand the rigors of use on construction sites. It is also designed to be easy to install, with a simple push-fit mechanism that allows it to be securely attached to the end of a soil pipe without the need for additional tools or fittings.
Once installed, the McAlpine CAP100 provides a reliable and effective seal, preventing any unwanted materials or debris from entering the soil pipe during construction or maintenance work. This helps to ensure that the soil pipe remains clean and free-flowing, reducing the risk of blockages or other issues that can cause problems in the future.
Overall, the McAlpine CAP100 is a high-quality and reliable temporary blanking off cap that is an essential tool for anyone working with soil pipes on construction or maintenance projects.
・ For temporarily sealing 4"/110mm pipe
・ Manufactured in synthetic rubber
The McAlpine Bath Plug & Chain is a reliable and sturdy option for sealing your bathtub drain. The set includes a plug with a durable rubber seal and a sturdy chain to prevent it from being lost down the drain. The plug is designed to fit securely in most standard bathtub drains and is easy to install. The chain is attached to the plug and can be easily removed if necessary. This bath plug and chain set is a must-have for any bathroom renovation or repair project, providing a simple and effective solution for sealing your bathtub.
・ Mounted on Card with Hanging Slot
・ Bath Plug & Chain
・ Available with or without triangle
The McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a durable plumbing accessory designed to reduce the size of a 1 1/2" trap inlet to a 1 1/4" inlet. This high-quality reducer is made from sturdy materials to ensure long-lasting performance and can be used with a variety of plumbing fixtures such as sinks and basins.
The reducer is easy to install and can be used for both commercial and residential applications. It helps to ensure that water flows smoothly through the plumbing system and prevents any blockages that could cause damage or inconvenience.
With its compact size and versatile design, the McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a must-have for any plumber or DIY enthusiast looking to upgrade their plumbing system.
・ Mounted on Card with Hanging Slot
・ 1½" x 1¼" Trap Inlet Reducer
・ Available in 2 sizes
・ Manufactured in White Polypropylene
The McAlpine White Pop-Up Plug is a stylish and functional accessory for your bathroom sink. This product includes a sleek, white-colored pop-up plug that can be easily opened and closed with a simple press.
Crafted from high-quality materials, the McAlpine White Pop-Up Plug is designed to withstand exposure to moisture and chemicals, ensuring its longevity and reliability in your plumbing system. The plug is both durable and easy to clean, making it a practical and hygienic choice for your bathroom.
Installation of the McAlpine White Pop-Up Plug is simple and straightforward. To use, simply insert the plug into your sink's waste opening and push down to close it. To open, simply push down on the plug again to release the water.
The McAlpine White Pop-Up Plug is an ideal choice for anyone looking to upgrade their current sink waste plug accessory or replace a worn-out one. Its high-quality construction, easy installation, and stylish design make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine White Pop-Up Plug is a must-have accessory for any bathroom sink. Its durable construction, easy installation, and stylish design make it a reliable choice for any household. Upgrade your sink waste plug accessory today with the McAlpine White Pop-Up Plug.
・ Mounted on Card with Hanging Slot
・ White Pop-Up Plug
・ Manufactured in White plastic
The McAlpine BSW6PC Centre Pin Sink Waste is a plumbing fitting designed for use with a sink. The waste has an 85mm stainless steel flange that is designed to fit neatly into the sink, and a plug to prevent water from draining away when required.
The centre pin design of this sink waste means that it can be easily installed in a sink with a central waste hole, and the stainless steel construction ensures durability and resistance to corrosion. The waste is also designed to be easy to clean and maintain, helping to keep your sink hygienic and free from blockages.
When installing this sink waste, it is important to follow the manufacturer's instructions carefully to ensure a secure and watertight fit. It is also recommended that you use a professional plumber to install the waste, especially if you are not familiar with plumbing installations.
・ Available in 1¼", 1½" and 2" sizes
・ Black PVC plug
・ Available with or without chain and stay
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a plumbing fixture designed for use in drainage systems. It features a clamp ring and cover plate for secure installation, and a 110mm or 2" vertical solvent spigot outlet for connection to other plumbing components.
The water seal trapped gully is an essential part of a drainage system as it helps prevent foul odours and gases from entering the building by trapping water in the gully. The trapped water creates a seal that stops gases from flowing back into the property. The trapped gully is usually installed in the floor to collect wastewater and prevent blockages in the drain system.
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is made of stainless steel, which provides excellent corrosion resistance and durability. The clamp ring and cover plate ensure a secure fit, and the 110mm or 2" vertical solvent spigot outlet allows for easy connection to other plumbing components.
Overall, the McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a reliable and effective solution for drainage systems, particularly in commercial or industrial applications where durability and reliability are critical.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
McAlpine ST90CPTOP+TUBE is a chrome-plated plastic flange and dip tube designed for use with 90mm shower traps. The dip tube is designed to fit inside the shower trap and prevent debris from entering the drainage system. The flange is designed to fit over the top of the shower tray or bath, providing a neat and tidy finish.
The McAlpine ST90CPTOP+TUBE has a diameter of 113mm and is made from high-quality materials, ensuring durability and longevity. The chrome-plated finish provides an attractive and easy-to-clean surface, making it ideal for use in bathrooms and wet rooms.
Overall, the McAlpine ST90CPTOP+TUBE is a reliable and effective solution for preventing blockages and maintaining good hygiene in your shower or bath drainage system.
・ Suits ST90 Trap
・ Includes Dip Tube
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine ST90CPB-S-53 is a slimline shower trap designed for use with 90mm shower wastes. It has a water seal of 50mm and features a 1½" solvent weld outlet. The trap is designed to prevent foul smells from entering your bathroom by trapping water inside the trap, which creates a seal that prevents gases from passing through.
The trap is made from high-quality materials and is built to last. It is easy to install and can be used with a range of different shower trays and waste pipes. The slimline design means that it can be installed in tight spaces and will not take up too much room under the shower tray.
Overall, the McAlpine ST90CPB-S-53 is a reliable and effective shower trap that is well-suited to a range of different bathroom installations. If you are looking for a high-quality shower trap that will provide reliable performance and help to keep your bathroom smelling fresh, this could be a good option to consider.
・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ Overall height is only 53mm
・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray
・ 25mm Water Seal
The McAlpine ST90CP10-V is a water seal shower trap that is designed to be used with a 2" universal vertical outlet. The trap has a removable 110mm flange, which makes it easy to clean and maintain. The trap has a water seal of 50mm and is designed to prevent foul odors from entering the bathroom.
The trap is made from high-quality materials, which make it durable and long-lasting. The trap is easy to install and comes with clear instructions to guide you through the installation process.
Overall, the McAlpine ST90CP10-V is a reliable and efficient shower trap that is perfect for use in any bathroom. It is important to ensure that you choose the correct size and type of trap for your shower to ensure proper function and prevent issues such as clogs and foul odors.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 2" Universal Vertical Outlet
・ Removable 110mm flange facilitates easy cleaning
The McAlpine R23U ¾" Blanking Cap for Overflow Pipe with Universal connection is a high-quality plumbing accessory designed to provide a quick and easy solution for capping off a ¾" overflow pipe. This blanking cap is a necessary component for any plumbing system that utilizes an overflow pipe, as it helps prevent water damage by keeping the pipe sealed when it is not in use.
The cap is made from durable materials that are resistant to corrosion and chemical damage, ensuring long-lasting performance and reliability. Its universal connection makes it compatible with most standard plumbing systems, and its compact size makes it easy to install even in tight spaces.
The ¾" size of the cap is a common size for overflow pipes, and its design ensures a tight and secure seal to prevent leaks and spills. Its simple and straightforward design makes it easy to use even for those without professional plumbing experience.
Overall, the McAlpine R23U ¾" Blanking Cap for Overflow Pipe with Universal connection is an essential tool for any plumber or DIY enthusiast. Its durable construction, compatibility with most standard plumbing systems, and easy-to-use design make it a versatile and reliable plumbing accessory that can be used in a variety of applications to help prevent water damage and ensure the smooth operation of your plumbing system.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
JG Underfloor Floor Panel is an underfloor heating (UFH) pipe fixing system provides high heat output and response. Suitable for 15mm pipe, it uses a simple grid system to ensure precise layout to enable minimum pipe bending radius. Ideal for new builds and extensions with a screed floor construction, especially ground floor levels.
Fast and simple to install, it comes with a 11mm layer of insulation along with additional thermal insulation.
Screed pipe fixing system
Simple castellated grid system for precise pipe layout
Enables minimum pipe bending radius
11mm layer of insulation and additional thermal insulation
High heat output and response
Ideal for larger regular shaped rooms
Suitable for underfloor heating applications only
JG Speedfit release aid allows a firmer grip on the collet when removing pipes. Designed, manufactured and assembled in the UK.
Provides a firmer grip on the collet demounting pipe
For use with Speedfit fittings
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate ¼ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit service valve with integrated isolation handle
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation.
To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
Integrated ¼ turn handle instantly isolates water
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
