The McAlpine Sink Overflow Stopper is a simple and effective accessory designed to prevent water from overflowing through the sink's overflow hole. It is an essential accessory for any sink that does not have an overflow prevention system built-in, as it provides a backup measure against water damage.
Made from high-quality materials, the McAlpine Sink Overflow Stopper is durable and built to last. It is designed to fit securely into most standard sink overflow holes, ensuring that water won't leak through the opening. The stopper features a convenient handle, making it easy to insert and remove from the overflow hole.
The McAlpine Sink Overflow Stopper is also incredibly easy to use. Simply place it into the sink's overflow hole and push down to create a seal. To remove it, just pull it out using the handle. It's that simple!
The McAlpine Sink Overflow Stopper is an essential accessory for anyone looking to prevent water damage from sink overflows. Its high-quality construction, ease of use, and compatibility with most standard sink overflow holes make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine Sink Overflow Stopper is a reliable and practical accessory for anyone looking to prevent water damage from sink overflows. Its durable construction, easy-to-use design, and compatibility with most standard sink overflow holes make it a must-have accessory for any sink without an overflow prevention system built-in. Upgrade your sink today with the McAlpine Sink Overflow Stopper!
・ Mounted on Card with Hanging Slot
・ Sink Overflow Stopper
・ Black Plastic overflow grid
The McAlpine BSW10P Centre Pin Bath Waste is a plumbing accessory designed for use in bathtubs. Here's a breakdown of its key features:
Centre Pin: The centre pin refers to the mechanism that controls the flow of water through the waste. In this case, it's a "pop-up" style waste, meaning that when you push down on the centre pin, the waste will open and allow water to drain out of the bathtub. When you push down on the pin again, it will pop back up and close the waste.
Bath Waste: A bath waste is a plumbing component that connects the drain in the bathtub to the plumbing system of the building. It's designed to allow water to drain out of the bathtub, while also preventing any debris or other items from clogging the pipes.
70mm Stainless Steel Flange: The flange is the part of the waste that sits on top of the bathtub and secures the waste in place. In this case, the flange is made of stainless steel, which is a durable and corrosion-resistant material.
Black PVC Plug: The plug is the part of the waste that seals the drain when the waste is closed. In this case, the plug is made of black PVC, which is a type of plastic that's known for its strength and durability.
Overall, the McAlpine BSW10P Centre Pin Bath Waste is a high-quality plumbing accessory that's designed to provide reliable performance and long-lasting durability.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is a plumbing component designed for use in drainage systems. It features a removable grid that can be easily taken out for cleaning, and is suitable for use with tiles or gratings. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing for easy installation with compatible pipes.
The water seal in the gully prevents foul odors from escaping into the air, making it an important component in any plumbing system. The trapped gully is typically installed in areas where there is a risk of water collecting, such as in showers, wet rooms, or other areas where water is likely to accumulate.
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to meet all relevant plumbing standards, ensuring that it is safe and reliable to use in a wide range of applications.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine STW4-65 is a slimline shower trap designed to be installed in a shower waste pipe. It has a 20mm water seal which helps prevent foul odours and gases from entering the bathroom. The trap has a solvent weld outlet, which means it can be securely joined to a waste pipe using a solvent weld adhesive.
The slimline design of the trap means it takes up less space under the shower tray, making it ideal for installations where space is limited. The trap is made from high-quality materials, ensuring it is durable and long-lasting.
It is important to ensure that the trap is installed correctly and in accordance with the manufacturer's instructions to ensure it functions correctly and prevents any potential issues with odours or blockages in the waste pipe.
・ Chrome Plated Plastic Flange
・ Suitable for shower trays with a 50mm waste hole
・ Overall height is only 65mm
・ 20mm Water Seal
・ Supplied with 1½" loose nut x solvent weld adaptor
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow.John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications.
All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications.Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
McAlpine 1�" White Anti-Syphon adaptor whose valve neutralises negative syphonic pressure and eliminates gurgling. Can be used with a bottle trap on it's own. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling Multifit Compression Outlet suits all plastic, copper and lead pipes AAV Trap Adaptor makes any Trap Anti-Syphon Manufactured in ABS Available in Black or White
Adjustable offset WC Connector. 97mm-107mm inlet with a 4"/110mm outlet. Cuttable and adjustable up to 400mm pipe centres. Manufactured in high quality ABS to be used in conjunction with Solvent Cement.
Simplify your plumbing projects with the McAlpine Offset 6cm WC Connector. Crafted from robust ABS plastic, this essential connector enables a seamless 6cm offset, perfect for aligning WC pans with soil pipes when a direct connection isn't feasible. Ideal for both professional plumbers and DIY enthusiasts, this product ensures reliable performance and durability, making your installation process smoother and more efficient. Don't let installation challenges hold you back – choose the McAlpine Offset WC Connector for a hassle-free solution.
The McAlpine Offset 8cm WC Connector is designed to provide a secure, offset connection for WC pans. Manufactured from high-quality ABS, this connector is both durable and easy to install � making it ideal for installations where a standard connection won�t align.
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 3
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Pack of 7
Main Product Description:
The FloPlast Niagara External Right Hand Stopend Black is a high-quality, durable fixture designed to cap off the right-hand open ends of Niagara gutter lengths. Made from uPVC material, it forms part of the Niagara Ogee guttering system and is suitable for various applications such as new builds, refurbishments, conservatories, and extensions in areas with heavy rainfall. It offers easy installation, good flow capacity, and comes with a 10-year performance and colour guarantee.
Features:
- Ornate (K-style) profile
- Clip system for fast and easy installation
- Designed for right-hand ends only
- Compatible with FloPlast 65mm square or 68/80mm round downpipe systems
- Manufactured to BS EN 607 standards
- Kitemarked under KM501316
Benefits:
- Traditional ogee style profile
- High capacity PVC-U domestic rainwater system
- Revolutionary moulded water-tight seal and retaining clip pre-fitted for user-friendly installation
- Suitable for all properties, old and new
- Outlet connects to square or round downpipes
- Available in various colours: black, white, brown, caramel, and FloPlast Cast Iron Effect guttering
- Fast delivery options available
Main Product Description:
The FloPlast Solvent Weld Soil 90 Degree Spigot Bend is a versatile plumbing component designed for creating a sharp 90-degree turn in soil piping systems. Available in both black and olive grey finishes, this bend features a long spigot tail that can be easily connected to other fittings using a solvent weld technique. It provides a reliable solution for changing directions in pipe layouts without compromising flow rate or system integrity.
Features:
- Constructed from durable materials suitable for soil piping applications
- Long spigot tail for secure connection to other fittings
- Solvent socket at one end for easy installation
- Available in two popular colors: black and olive grey
- Designed for use with solvent weld techniques
Benefits:
- Enables precise changes of direction in pipe layouts
- Compatible with various piping systems and materials
- Provides a seamless transition between different sections of piping
- Adds flexibility to the design of pipe networks
Main Product Description:
The FloPlast Solvent Weld Soil Branch Grey SS191 is a high-quality component for soil pipe systems, designed to join horizontal and vertical pipes with ease. With its unique 92.5-degree angle, it ensures a self-cleaning fall while providing a secure connection for all three connections using solvent sockets.
Features:
- Resistant to inorganic acids, alkalis, and boiling water
- Made from robust PVC-U material
- Available in olive grey color
- Suitable for use with plain-ended pipes or other fittings
- Self-cleansing due to its angled design
Benefits:
- Enhanced durability against various chemicals and heat sources
- Versatile fitting suitable for various pipe configurations
- Aesthetically pleasing olive grey finish
- Improved water flow due to self-cleansing angle
Main Product Description:
The FloPlast Solvent Weld Soil 92.5 Degree Bend Grey is a versatile plumbing component designed for use with PVC soil pipes. It features solvent sockets on both ends that allow it to be connected to plain ended pipes or other fittings using solvent welding techniques. The 92.5-degree angle provides a smooth transition in changing the direction of the pipe, making it suitable for use in various applications without compromising water flow and drainage efficiency.
Features:
- Constructed from high-quality PVC material for durability and resistance to corrosion
- Designed for use with standard PVC soil pipes
- Solvent sockets on both ends enable easy connection to plain ended pipes or other fittings
- Available in different sizes, including 50mm and 110mm diameters
Benefits:
- Promotes efficient water flow and drainage by reducing turbulence caused by sharp angles
- Ensures seamless integration with existing plumbing systems due to its universal compatibility
- Offers long-term performance and reliability, even under harsh environmental conditions
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
Connects a supply to a tap or other fixture or appliance
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
The McAlpine Multifit Straight Connector 1.1/2" T28M-BL is a plumbing fitting used to connect two pipes with a diameter of 1.1/2 inches. It is designed for use with solvent weld waste pipes and is commonly used in domestic and commercial plumbing systems.
The "Multifit" part of the name stands for "Multi Fit," which is a type of fitting made by McAlpine, a UK-based plumbing company. The "Straight Connector" refers to the straight connection between the two pipes, rather than a 90-degree angle or other configuration.
The "T28M" part of the name is a reference to the specific model number of the fitting. It is important to ensure that the fitting is compatible with the pipes you are working with and that it is installed correctly to avoid leaks or other plumbing issues. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine MultiFit 90 Deg Bend 1.1/2" MT4-BL is a plumbing fitting used for redirecting the flow of water or waste through a plumbing system. The bend is made of durable and lightweight material, making it easy to handle and install. The fitting is designed with a multifit connection, which means it can fit a range of different pipe sizes and types, including copper, plastic, and lead pipes. The 90-degree bend allows for a smooth change in direction of the plumbing system, reducing the risk of blockages or leaks. This McAlpine MultiFit 90 Deg Bend 1.1/2" MT4-BL is a high-quality plumbing fitting designed for use in a variety of domestic and commercial plumbing applications.
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020, copper pipe and lead pipe
Introducing the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – Streamlined Efficiency and Hygiene for Your Kitchen Plumbing!
Upgrade your kitchen with the McAlpine FSW2PC-70, an innovative 1.5" Combined Sink Waste and Overflow designed to optimize functionality and maintain cleanliness. Expertly crafted with precision engineering, this combined waste and overflow system sets a new standard for efficiency and reliability in your kitchen plumbing.
Key Features:
Integrated Waste and Overflow: The FSW2PC-70 ingeniously combines waste and overflow functions within a single, efficient unit. This integrated design not only simplifies your kitchen plumbing setup but also ensures consistent water drainage and overflow prevention with a single, reliable solution.
Optimal 1.5" Size: With a 1.5" size, this combined waste and overflow system provides ample capacity for efficient water flow in your kitchen sink. The optimal size guarantees quick drainage, preventing water buildup and maintaining a hygienic and clean kitchen environment.
Hygienic Trap Seal: The FSW2PC-70 features a trap seal that effectively blocks foul odors and sewer gases from entering your kitchen. This hygienic design promotes a pleasant and fresh atmosphere in your kitchen space.
Durable Construction: Crafted from high-quality materials, this combined waste and overflow system ensures durability and longevity. The robust construction is resistant to corrosion and wear, providing a dependable solution that withstands the rigors of daily kitchen use.
Effortless Installation: Designed for user-friendly installation, the McAlpine FSW2PC-70 simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your kitchen plumbing with the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – where efficiency meets hygiene. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your sink but also provide a durable and reliable component for years to come. Elevate your kitchen experience with the FSW2PC-70, setting a new standard in combined waste and overflow excellence.
Sink Combined Waste and Overflow: Stainless Steel Flange: Chrome Plated Overflow Grid: Black PVC Plug and Chrome Plated Chain: Centre Pin Model
Available in 1.25” and 1.5” sizes
Available with 70mm or 85mm flange
Chrome Plated Plastic overflow grid
Black PVC plug and CP chain
Flexible overflow tube has OD of 25mm
Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
The polished stainless steel flange eliminates the problem of chrome plating deterioration
Manufactured in Polypropylene
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 2
The McAlpine PUS70-CP 1½" Pop-Up Sink Waste is a plumbing fitting used to drain water from a sink. It features a 70mm stainless steel flange, a chrome-plated plastic command knob, and a center pin model.
The pop-up waste mechanism allows the user to easily control the flow of water from the sink. The chrome-plated plastic command knob is used to open and close the pop-up waste mechanism. The center pin model is designed to ensure a secure and leak-free connection between the sink and the plumbing system.
The McAlpine PUS70-CP is made from high-quality materials, which are durable and resistant to corrosion. The stainless steel flange and chrome-plated plastic command knob give it a sleek and modern look that can complement a range of bathroom and kitchen styles.
Installation of the McAlpine PUS70-CP is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of sink models and can be easily installed using standard plumbing techniques.
Overall, the McAlpine PUS70-CP 1½" Pop-Up Sink Waste is a reliable and efficient solution for draining water from a sink. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between the sink and the plumbing system. The pop-up waste mechanism and chrome-plated plastic command knob make it easy to use and control the flow of water from the sink.
・ Available with or without flexible overflow and CP Plastic grid
・ 1½" BSP
・ 70mm Stainless Steel flange
・ Chrome Plated plastic command knob
・ Manufactured in Polypropylene
The McAlpine 2" X 2" Self Sealing Valve is a plumbing fitting used to provide a secure and reliable connection between two pipes of the same size. The valve is designed to be self-sealing, which means that it automatically seals when the connection is broken, preventing the flow of water or other fluids.
The valve is commonly used in plumbing systems where a quick and easy shut-off is required, such as in washing machines or other appliances. The self-sealing feature of the valve prevents leaks and minimizes the risk of water damage in the event of a malfunction or repair.
The McAlpine 2" X 2" Self Sealing Valve is made from high-quality materials such as brass or plastic, depending on the specific model. The materials used are durable and resistant to corrosion, ensuring that the valve will last for many years.
Installation of the McAlpine 2" X 2" Self Sealing Valve is straightforward and can be done by a qualified plumber. The valve is designed to fit pipes of the same size, and the self-sealing feature ensures a watertight connection without the need for additional sealing materials.
Overall, the McAlpine 2" X 2" Self Sealing Valve is a reliable and efficient solution for plumbing systems that require a quick and easy shut-off. It is a durable and long-lasting product that can help to prevent leaks and minimize the risk of water damage in the event of a malfunction or repair.
・ Can be fitted in the horizontal or vertical position
・ The Internal Membrane opens under water pressure to
allow the discharge to flow freely and then closes to
form a seal to prevent foul odour or sewer gas
entering the building
・ 2" x 2" Universal Compression Connections
・ The Non-Return Valve shall prevent problems with
waste backflow or back pressure in the discharge pipe
system
・ Easily removed for maintenance of the discharge
pipework
The McAlpine HCUP50UK is a syphonic trap designed to suit continental style syphonic urinal bowls. It creates a 75mm water seal trap and has an inlet to suit the urinal bowl. The outlet is designed to suit 2" BS EN 1329-1:2020 solvent weld pipe.
・ 75mm Water Seal
・ Outlet to suit 2" BS EN 1329-1:2020 Solvent weld pipe
・ Suits Continental Style Syphonic Urinal Bowl
・ Manufactured in polypropylene
・ Conforms to BS EN 274-2:2002
The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is a plumbing fitting designed to connect a 1.1/4 inch solvent weld pipe to a push fit pipe. The "S18-Abs" in the description refers to the specific model of the adaptor, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The adaptor is designed with a straight configuration, meaning that it forms a straight connection between the two pipes. The solvent weld end of the adaptor is designed to fit inside a 1.1/4 inch solvent weld pipe, while the push fit end of the adaptor is designed to fit onto a push fit pipe.
The push fit end of the adaptor is made with ABS, which is a type of plastic commonly used in plumbing applications due to its durability and resistance to chemical corrosion. The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is designed to provide a secure, leak-free connection between solvent weld and push fit pipes, making it a useful fitting for a variety of plumbing applications.
・ Available in 1¼" and 1½" sizes
The McAlpine ST90CB10-HP2 is a 90mm x 50mm water seal shower trap designed for use in showers. It features a 1½" outlet and a removable 110mm flange, which makes it easy to install and maintain.
The ST90CB10-HP2 model features a high-flow, high-performance trap design that allows for rapid and efficient drainage of water. This is particularly useful for showers that produce a high volume of water, such as power showers or multi-jet shower systems.
Like the standard ST90CB10 model, the ST90CB10-HP2 also features a water seal trap design that prevents foul odours from entering the bathroom by trapping water in the trap. The 90mm x 50mm size is suitable for most standard shower installations.
The removable 110mm flange is a useful feature that allows for easy access to the trap for cleaning and maintenance purposes. This makes it easy to keep the trap clean and free from blockages, ensuring that the shower continues to function properly.
Overall, the McAlpine ST90CB10-HP2 shower trap is a reliable and practical choice for anyone looking for a high-flow, high-performance shower trap. Its water seal design prevents foul odours from entering the bathroom, while the removable flange makes it easy to maintain and keep clean. The high-performance trap design ensures efficient drainage of water, making it a suitable option for power showers or multi-jet shower systems.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 1½" Universal
The McAlpine CBW70-CB is a 1½" bath waste with a chrome plated brass construction, designed for use in baths. It features a 70mm flange with a spring-loaded mushroom plug and a backnut model.
The 70mm flange is the visible part of the waste that is attached to the bathtub, while the spring-loaded mushroom plug is the component that blocks water from draining out of the bathtub. The backnut model refers to the design of the waste, which includes a threaded backnut that is used to secure the waste in place.
Overall, the McAlpine CBW70-CB bath waste is a durable and reliable option for anyone looking to install or replace a bath waste in their bathroom.
・ 1½" BSP
・ Spring loaded mushroom plug
・ Chrome Plated Brass Backnut
・ 70mm flange
・ Manufactured in Chrome Plated Brass
The McAlpine ABSCON-32X1.25 is an ABS solvent weld adaptor designed to convert chrome plated brass compression fittings to plastic solvent weld waste pipes that conform to the BS EN 1329-1:2000 standard. The adaptor is designed to be used with waste pipes and fittings made of ABS (Acrylonitrile Butadiene Styrene) material.
The purpose of this adaptor is to allow for the connection of waste pipes and fittings made of ABS material to chrome plated brass compression fittings. The adaptor is designed to provide a secure and reliable connection between the two different materials, ensuring that the waste system is watertight and free from leaks.
The McAlpine ABSCON-32X1.25 is designed to be used with McAlpine waste fittings and is compatible with a wide range of different pipes and fittings. The ABS solvent weld adaptor is easy to install, and once in place, it provides a durable and long-lasting connection.
Overall, the McAlpine ABSCON-32X1.25 ABS Solvent Weld Adaptor is a high-quality, reliable fitting that is well-suited to a variety of plumbing and waste applications where the connection of ABS waste pipes and fittings to chrome plated brass compression fittings is required.
・ Available in 3 sizes
・ Use with McAlpine Chrome Plated Brass Waste Pipe and Fittings
The McAlpine STWGR-GP 1½" Shower Grid is a plumbing accessory that is designed to fit over the waste outlet of a shower tray to prevent debris from entering the waste pipe and causing blockages. The grid features a 1½" diameter and is designed to fit a range of shower waste traps, including those made by McAlpine.
The shower grid is made from high-quality, durable materials that are resistant to corrosion and damage from water and chemicals commonly found in bathrooms. The grid is easy to install and can be easily removed for cleaning and maintenance.
The STWGR-GP shower grid features a stylish, modern design that complements most bathroom décor. It is also available in a range of finishes, including chrome and gold, to match other fixtures and fittings in the bathroom.
In addition to preventing blockages, the shower grid also helps to improve hygiene by preventing debris and bacteria from accumulating in the waste pipe. This can help to prevent unpleasant odours and reduce the risk of bacterial growth.
Overall, the McAlpine STWGR-GP 1½" Shower Grid is a high-quality and practical plumbing accessory that can help to improve the performance and hygiene of shower waste systems. It is an ideal choice for use in both residential and commercial bathroom installations.
・ Available in White, Chrome Plated or Gold Plated Plastic
The McAlpine WCTRAP4P is a 50mm Water Seal Pushfit 'P' Trap designed for use in plumbing systems to prevent foul odors from entering a building or property. It is typically used in conjunction with sinks, baths, and other sanitaryware.
The 'P' trap design allows for a water seal to be maintained within the trap, which prevents foul smells and gases from traveling up through the plumbing system and into the building. The water seal also helps to prevent blockages by trapping debris within the trap, rather than allowing it to pass through the system.
The pushfit design of the McAlpine WCTRAP4P makes it easy to install without the need for any additional fittings or tools. The trap simply pushes onto the waste pipe and locks in place, providing a secure and reliable connection.
Overall, the McAlpine WCTRAP4P 50mm Water Seal Pushfit 'P' Trap is a high-quality plumbing component that is suitable for a wide range of applications in both commercial and residential settings.
The McAlpine CONFLEX-300 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. The purpose of this connector is to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-300 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
In addition to its flexibility and durability, the CONFLEX-300 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Overall, the McAlpine CONFLEX-300 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes. Its flexible design, corrosion-resistant materials, and built-in backflow prevention make it a popular choice among HVAC professionals and homeowners alike.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The McAlpine GWU20 is a 2" urinal waste with an 85mm plastic domed flange and a 42mm tail with a backnut model. It is designed for use in commercial or public restrooms where urinals are installed.
The 2" diameter of the waste pipe is suitable for handling the larger volume of water and waste that is produced by urinals. The 85mm plastic domed flange provides a secure and watertight seal between the waste pipe and the floor or wall, preventing any leaks or water damage.
The removable dome on the flange makes it easy to access and clean the waste pipe, while the backnut model allows for easy installation and removal of the waste pipe as needed. The 42mm tail of the waste pipe is designed to connect to standard plumbing fixtures and pipes, making it easy to integrate into existing plumbing systems.
When installing the McAlpine GWU20 urinal waste, it is important to follow the manufacturer's instructions carefully and use appropriate tools and materials. The waste pipe should be securely fastened and any excess sealant or debris should be cleaned away to ensure a reliable and leak-free installation.
Overall, the McAlpine GWU20 urinal waste is a reliable and durable option for use in commercial or public restrooms where urinals are installed.
・ Available with grey or white plastic tail
・ 2" BSP
・ 85mm Domed Flange with removable dome
・ Removable dome with 42mm tail
・ Manufactured in Polypropylene
The McAlpine FLEX-JKS is a flexible fitting designed for use in plumbing systems. It is manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The FLEX-JKS features a BSP (British Standard Pipe) coupling nut on one end and a BSP male thread on the other end. This design allows the fitting to be easily installed in a variety of plumbing applications, including those that require a flexible connection between two pipes.
The flexible design of the fitting allows for some movement between the pipes, which can help to reduce stress on the plumbing system and prevent leaks or damage. The FLEX-JKS is made from high-quality materials and is designed to be durable and long-lasting, providing reliable performance over time.
Overall, the McAlpine FLEX-JKS is a versatile and reliable component of a plumbing system, particularly in situations where a flexible connection is required. Its BSP coupling nut and BSP male thread make it easy to install and compatible with a wide range of plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Offers complete flexibility for any required angle or offset
・ Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000
・ Approximate adjustable lengths below
The McAlpine Z23 Blank Cap with nut is a plumbing fitting designed to seal off an unused or open pipe end. It features a BSP (British Standard Pipe) thread and comes with a nut for easy installation and removal.
The Z23 blank cap is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The cap is designed to provide a secure and watertight seal, preventing any leaks or water damage that could occur if a pipe end is left open.
The cap is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is compatible with other BSP threaded fittings and pipes, and its simple design makes it easy to install and remove.
Overall, the McAlpine Z23 Blank Cap with nut is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal for unused or open pipe ends. It is easy to install and compatible with a range of other fittings and pipes, making it a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine WS3 1½" Shower Waste is a plumbing fitting designed for use in shower systems. It features an 85mm white plastic flange and a 3½" tail with a backnut model for easy installation.
The WS3 waste is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in shower systems. The white plastic flange provides a neat and tidy finish that is suitable for a wide range of bathroom designs.
The 3½" tail of the waste is designed to fit into standard sized pipes and provides a secure and watertight seal to prevent leaks. The backnut model of the waste makes it easy to install and remove as needed, allowing for simple maintenance and repairs.
The WS3 shower waste is suitable for use in both domestic and commercial shower systems, and is capable of handling the demands of high-flow water systems. It is compatible with a range of shower trays and floor surfaces, making it a versatile and reliable choice for any shower installation.
Overall, the McAlpine WS3 1½" Shower Waste is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in shower systems. It is easy to install and maintain, making it a popular choice for both professional and DIY plumbers.
・ 1½" BSP
・ 85mm White Plastic flange
・ White plastic Backnut
・ 1½" Tail
・ Manufactured in Polypropylene
