The McAlpine Offset 8cm WC Connector is designed to provide a secure, offset connection for WC pans. Manufactured from high-quality ABS, this connector is both durable and easy to install � making it ideal for installations where a standard connection won�t align.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified
Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.
If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 10Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 3
Plugs an unused port on a John Guest push-fit fitting
John Guest push-fit acetal plug is for plugging unused connection ports on a John Guest fitting. All John Guest fittings are manufactured and assembled in the UK.
Pack of 5
Main Product Description:
The FloPlast Niagara External Right Hand Stopend Black is a high-quality, durable fixture designed to cap off the right-hand open ends of Niagara gutter lengths. Made from uPVC material, it forms part of the Niagara Ogee guttering system and is suitable for various applications such as new builds, refurbishments, conservatories, and extensions in areas with heavy rainfall. It offers easy installation, good flow capacity, and comes with a 10-year performance and colour guarantee.
Features:
- Ornate (K-style) profile
- Clip system for fast and easy installation
- Designed for right-hand ends only
- Compatible with FloPlast 65mm square or 68/80mm round downpipe systems
- Manufactured to BS EN 607 standards
- Kitemarked under KM501316
Benefits:
- Traditional ogee style profile
- High capacity PVC-U domestic rainwater system
- Revolutionary moulded water-tight seal and retaining clip pre-fitted for user-friendly installation
- Suitable for all properties, old and new
- Outlet connects to square or round downpipes
- Available in various colours: black, white, brown, caramel, and FloPlast Cast Iron Effect guttering
- Fast delivery options available
Main Product Description:
The FloPlast Solvent Weld Soil 90 Degree Spigot Bend is a versatile plumbing component designed for creating a sharp 90-degree turn in soil piping systems. Available in both black and olive grey finishes, this bend features a long spigot tail that can be easily connected to other fittings using a solvent weld technique. It provides a reliable solution for changing directions in pipe layouts without compromising flow rate or system integrity.
Features:
- Constructed from durable materials suitable for soil piping applications
- Long spigot tail for secure connection to other fittings
- Solvent socket at one end for easy installation
- Available in two popular colors: black and olive grey
- Designed for use with solvent weld techniques
Benefits:
- Enables precise changes of direction in pipe layouts
- Compatible with various piping systems and materials
- Provides a seamless transition between different sections of piping
- Adds flexibility to the design of pipe networks
Main Product Description:
The FloPlast Solvent Weld Soil Branch Grey SS191 is a high-quality component for soil pipe systems, designed to join horizontal and vertical pipes with ease. With its unique 92.5-degree angle, it ensures a self-cleaning fall while providing a secure connection for all three connections using solvent sockets.
Features:
- Resistant to inorganic acids, alkalis, and boiling water
- Made from robust PVC-U material
- Available in olive grey color
- Suitable for use with plain-ended pipes or other fittings
- Self-cleansing due to its angled design
Benefits:
- Enhanced durability against various chemicals and heat sources
- Versatile fitting suitable for various pipe configurations
- Aesthetically pleasing olive grey finish
- Improved water flow due to self-cleansing angle
Main Product Description:
The FloPlast Solvent Weld Soil 92.5 Degree Bend Grey is a versatile plumbing component designed for use with PVC soil pipes. It features solvent sockets on both ends that allow it to be connected to plain ended pipes or other fittings using solvent welding techniques. The 92.5-degree angle provides a smooth transition in changing the direction of the pipe, making it suitable for use in various applications without compromising water flow and drainage efficiency.
Features:
- Constructed from high-quality PVC material for durability and resistance to corrosion
- Designed for use with standard PVC soil pipes
- Solvent sockets on both ends enable easy connection to plain ended pipes or other fittings
- Available in different sizes, including 50mm and 110mm diameters
Benefits:
- Promotes efficient water flow and drainage by reducing turbulence caused by sharp angles
- Ensures seamless integration with existing plumbing systems due to its universal compatibility
- Offers long-term performance and reliability, even under harsh environmental conditions
Introducing the FloPlast ABS Solvent Weld 92.5 Degree Cross Tee 40mm White (Product Code: 225430) – a reliable and versatile solution for your plumbing needs. This cross tee is designed to provide a secure and seamless connection in your plumbing system.
Key Features:
Size: Tailored for 40mm pipes, the ABS Solvent Weld 92.5 Degree Cross Tee (225430) ensures a precise fit in your plumbing configuration.
Angle: Featuring a 92.5-degree cross tee, this component facilitates complex plumbing layouts, allowing for efficient direction changes in your system.
Material: Crafted from high-quality ABS (Acrylonitrile Butadiene Styrene), this cross tee offers durability and resistance to impact, ensuring long-lasting performance.
Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics.
Solvent Weld Connection: Engineered for secure solvent weld connections, providing a reliable and leak-free joint for your plumbing setup.
Versatile Application: Suitable for a variety of plumbing installations, this cross tee offers flexibility in adapting your plumbing system to different configurations.
Benefits:
Precise Fit: Tailored to 40mm pipes, this cross tee ensures a precise and secure fit, contributing to the efficiency of your plumbing system.
Efficient Direction Changes: The 92.5-degree angle facilitates complex plumbing layouts, allowing for efficient and smooth direction changes in your system.
Durable Construction: Crafted from high-quality ABS, this tee is built to withstand the demands of plumbing applications, ensuring longevity and resistance to impact.
Corrosion Resistance: The ABS material is resistant to corrosion, ensuring a clean and unobstructed water flow through your plumbing system.
Aesthetic Appeal: The white finish adds a clean and professional look to your plumbing setup, enhancing the overall aesthetic of your installation.
Versatility: The cross tee's design allows for versatile application, making it suitable for various plumbing configurations and installations.
Upgrade your plumbing system with the FloPlast ABS Solvent Weld 92.5 Degree Cross Tee 40mm White (225430) – a reliable and versatile solution that combines durability with ease of installation, ensuring efficient and secure plumbing connections in your network.
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
Connects a supply to a tap or other fixture or appliance
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
The McAlpine Multifit Straight Connector 1.1/2" T28M-BL is a plumbing fitting used to connect two pipes with a diameter of 1.1/2 inches. It is designed for use with solvent weld waste pipes and is commonly used in domestic and commercial plumbing systems.
The "Multifit" part of the name stands for "Multi Fit," which is a type of fitting made by McAlpine, a UK-based plumbing company. The "Straight Connector" refers to the straight connection between the two pipes, rather than a 90-degree angle or other configuration.
The "T28M" part of the name is a reference to the specific model number of the fitting. It is important to ensure that the fitting is compatible with the pipes you are working with and that it is installed correctly to avoid leaks or other plumbing issues. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
Introducing the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – Streamlined Efficiency and Hygiene for Your Kitchen Plumbing!
Upgrade your kitchen with the McAlpine FSW2PC-70, an innovative 1.5" Combined Sink Waste and Overflow designed to optimize functionality and maintain cleanliness. Expertly crafted with precision engineering, this combined waste and overflow system sets a new standard for efficiency and reliability in your kitchen plumbing.
Key Features:
Integrated Waste and Overflow: The FSW2PC-70 ingeniously combines waste and overflow functions within a single, efficient unit. This integrated design not only simplifies your kitchen plumbing setup but also ensures consistent water drainage and overflow prevention with a single, reliable solution.
Optimal 1.5" Size: With a 1.5" size, this combined waste and overflow system provides ample capacity for efficient water flow in your kitchen sink. The optimal size guarantees quick drainage, preventing water buildup and maintaining a hygienic and clean kitchen environment.
Hygienic Trap Seal: The FSW2PC-70 features a trap seal that effectively blocks foul odors and sewer gases from entering your kitchen. This hygienic design promotes a pleasant and fresh atmosphere in your kitchen space.
Durable Construction: Crafted from high-quality materials, this combined waste and overflow system ensures durability and longevity. The robust construction is resistant to corrosion and wear, providing a dependable solution that withstands the rigors of daily kitchen use.
Effortless Installation: Designed for user-friendly installation, the McAlpine FSW2PC-70 simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your kitchen plumbing with the McAlpine 1.5" Combined Sink Waste and Overflow with 70mm Flange FSW2PC-70 – where efficiency meets hygiene. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your sink but also provide a durable and reliable component for years to come. Elevate your kitchen experience with the FSW2PC-70, setting a new standard in combined waste and overflow excellence.
Sink Combined Waste and Overflow: Stainless Steel Flange: Chrome Plated Overflow Grid: Black PVC Plug and Chrome Plated Chain: Centre Pin Model
Available in 1.25” and 1.5” sizes
Available with 70mm or 85mm flange
Chrome Plated Plastic overflow grid
Black PVC plug and CP chain
Flexible overflow tube has OD of 25mm
Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
The polished stainless steel flange eliminates the problem of chrome plating deterioration
Manufactured in Polypropylene
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 2
The McAlpine 2" X 2" Self Sealing Valve is a plumbing fitting used to provide a secure and reliable connection between two pipes of the same size. The valve is designed to be self-sealing, which means that it automatically seals when the connection is broken, preventing the flow of water or other fluids.
The valve is commonly used in plumbing systems where a quick and easy shut-off is required, such as in washing machines or other appliances. The self-sealing feature of the valve prevents leaks and minimizes the risk of water damage in the event of a malfunction or repair.
The McAlpine 2" X 2" Self Sealing Valve is made from high-quality materials such as brass or plastic, depending on the specific model. The materials used are durable and resistant to corrosion, ensuring that the valve will last for many years.
Installation of the McAlpine 2" X 2" Self Sealing Valve is straightforward and can be done by a qualified plumber. The valve is designed to fit pipes of the same size, and the self-sealing feature ensures a watertight connection without the need for additional sealing materials.
Overall, the McAlpine 2" X 2" Self Sealing Valve is a reliable and efficient solution for plumbing systems that require a quick and easy shut-off. It is a durable and long-lasting product that can help to prevent leaks and minimize the risk of water damage in the event of a malfunction or repair.
・ Can be fitted in the horizontal or vertical position
・ The Internal Membrane opens under water pressure to
allow the discharge to flow freely and then closes to
form a seal to prevent foul odour or sewer gas
entering the building
・ 2" x 2" Universal Compression Connections
・ The Non-Return Valve shall prevent problems with
waste backflow or back pressure in the discharge pipe
system
・ Easily removed for maintenance of the discharge
pipework
The McAlpine CPTSG Conversion Cover Plate is a plumbing accessory that is designed to be used with the McAlpine TSG1, TSG50, TSG52, and TSG2 shower gullies for sheet flooring. It allows the gullies to be converted for use with a 1½" waste pipe.
The Conversion Cover Plate features a 1½" universal pipe boss that can be easily inserted into the gully to create a connection for the waste pipe. It is made from high-quality PVC material and is designed to provide a secure and watertight connection.
The Conversion Cover Plate is easy to install and provides a high level of performance and functionality. It is suitable for use with a range of sheet flooring materials, including vinyl, tiled, and concrete floors. It is also suitable for use in both domestic and commercial plumbing installations.
Overall, the McAlpine CPTSG Conversion Cover Plate is a reliable and durable plumbing accessory that allows the TSG1, TSG50, TSG52, and TSG2 shower gullies for sheet flooring to be used with a 1½" waste pipe. It is an excellent choice for those who are looking for a simple and effective solution for converting their shower gullies to work with a larger waste pipe.
・ Used to seal off Gully or to convert to a drain connection to allow for installation of bath waste
・ Supplied with 135° Bend - BSP coupling nut x 2" Multifit
・ Can be used with any TSG1, TSG50, TSG52 and TSG2 Shower Gullies for sheet flooring
The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is a plumbing fitting designed to connect a 1.1/4 inch solvent weld pipe to a push fit pipe. The "S18-Abs" in the description refers to the specific model of the adaptor, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The adaptor is designed with a straight configuration, meaning that it forms a straight connection between the two pipes. The solvent weld end of the adaptor is designed to fit inside a 1.1/4 inch solvent weld pipe, while the push fit end of the adaptor is designed to fit onto a push fit pipe.
The push fit end of the adaptor is made with ABS, which is a type of plastic commonly used in plumbing applications due to its durability and resistance to chemical corrosion. The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is designed to provide a secure, leak-free connection between solvent weld and push fit pipes, making it a useful fitting for a variety of plumbing applications.
・ Available in 1¼" and 1½" sizes
The McAlpine CBW70-CB is a 1½" bath waste with a chrome plated brass construction, designed for use in baths. It features a 70mm flange with a spring-loaded mushroom plug and a backnut model.
The 70mm flange is the visible part of the waste that is attached to the bathtub, while the spring-loaded mushroom plug is the component that blocks water from draining out of the bathtub. The backnut model refers to the design of the waste, which includes a threaded backnut that is used to secure the waste in place.
Overall, the McAlpine CBW70-CB bath waste is a durable and reliable option for anyone looking to install or replace a bath waste in their bathroom.
・ 1½" BSP
・ Spring loaded mushroom plug
・ Chrome Plated Brass Backnut
・ 70mm flange
・ Manufactured in Chrome Plated Brass
The McAlpine ABSCON-32X1.25 is an ABS solvent weld adaptor designed to convert chrome plated brass compression fittings to plastic solvent weld waste pipes that conform to the BS EN 1329-1:2000 standard. The adaptor is designed to be used with waste pipes and fittings made of ABS (Acrylonitrile Butadiene Styrene) material.
The purpose of this adaptor is to allow for the connection of waste pipes and fittings made of ABS material to chrome plated brass compression fittings. The adaptor is designed to provide a secure and reliable connection between the two different materials, ensuring that the waste system is watertight and free from leaks.
The McAlpine ABSCON-32X1.25 is designed to be used with McAlpine waste fittings and is compatible with a wide range of different pipes and fittings. The ABS solvent weld adaptor is easy to install, and once in place, it provides a durable and long-lasting connection.
Overall, the McAlpine ABSCON-32X1.25 ABS Solvent Weld Adaptor is a high-quality, reliable fitting that is well-suited to a variety of plumbing and waste applications where the connection of ABS waste pipes and fittings to chrome plated brass compression fittings is required.
・ Available in 3 sizes
・ Use with McAlpine Chrome Plated Brass Waste Pipe and Fittings
The McAlpine CP2H Chrome Plated Plastic Plug with Handle and Rubber Seal is a plumbing fitting that is designed to provide a secure and watertight seal for waste pipes or other plumbing applications.
The plug has a chrome-plated plastic construction, which provides a durable and corrosion-resistant finish that is easy to clean. The handle on the top of the plug allows for easy installation and removal, making it a convenient option for maintenance or cleaning tasks.
The rubber seal on the bottom of the plug provides a secure and leak-free seal, ensuring that water and other fluids do not leak out of the pipe. The seal is designed to be durable and long-lasting, providing reliable performance over time.
Overall, the McAlpine CP2H Chrome Plated Plastic Plug with Handle and Rubber Seal is a high-quality and reliable plumbing fitting that is easy to install and provides a secure and leak-free seal for waste pipes or other plumbing applications. Its chrome-plated plastic construction and easy-to-use handle make it a popular choice among plumbing professionals and DIY enthusiasts.
・ Available in 1½" or 1¾"
・ CP Plastic
The McAlpine OBT1-CO is a plumbing component, specifically a multifit outlet offset trap with a 75mm water seal. It is designed for use with appliances such as dishwashers and washing machines, as well as other types of domestic and commercial equipment that discharge waste water.
The OBT1-CO features a 19/23mm inlet and outlet, making it compatible with a range of pipe sizes. It has a unique offset design, which allows it to be installed in tight spaces and where there are existing pipework or obstructions. The trap is made from high-quality polypropylene plastic, which is lightweight and durable.
The multifit outlet of the OBT1-CO allows it to be connected to a range of pipework, including push-fit and solvent weld systems, making it a versatile option for a variety of plumbing applications. The trap also features a removable, easy-to-clean seal, which helps to prevent blockages and keep the system running smoothly.
Overall, the McAlpine OBT1-CO is a reliable and efficient offset trap that is suitable for use in a wide range of plumbing applications. It is a popular choice among plumbers and builders for its versatility, durability, and ease of installation.
・ 19/23mm Inlet and Outlet
・ Trap receives discharge from condensing boiler
・ Supplied with Support Clip
・ Conforms to BS EN 274-1:2002, BS 6798:2009 and Building Regulations Approved Document H
The McAlpine STWGR-GP 1½" Shower Grid is a plumbing accessory that is designed to fit over the waste outlet of a shower tray to prevent debris from entering the waste pipe and causing blockages. The grid features a 1½" diameter and is designed to fit a range of shower waste traps, including those made by McAlpine.
The shower grid is made from high-quality, durable materials that are resistant to corrosion and damage from water and chemicals commonly found in bathrooms. The grid is easy to install and can be easily removed for cleaning and maintenance.
The STWGR-GP shower grid features a stylish, modern design that complements most bathroom décor. It is also available in a range of finishes, including chrome and gold, to match other fixtures and fittings in the bathroom.
In addition to preventing blockages, the shower grid also helps to improve hygiene by preventing debris and bacteria from accumulating in the waste pipe. This can help to prevent unpleasant odours and reduce the risk of bacterial growth.
Overall, the McAlpine STWGR-GP 1½" Shower Grid is a high-quality and practical plumbing accessory that can help to improve the performance and hygiene of shower waste systems. It is an ideal choice for use in both residential and commercial bathroom installations.
・ Available in White, Chrome Plated or Gold Plated Plastic
The McAlpine BT1 19mm Water Seal Adjustable Inlet Tubular Swivel 'P' Trap with Multifit Outlet is a plumbing component used for connecting the waste pipe from a sink, basin, or bath to the drainage system. The 'P' trap is named after its shape, which resembles the letter 'P'.
The McAlpine BT1 'P' trap features an adjustable inlet that can be rotated and adjusted to fit a range of positions and angles. This allows for greater flexibility in installation and helps to ensure a secure and watertight connection.
The 19mm water seal is designed to prevent foul odours and gases from escaping from the drainage system and entering the living space. The water seal also helps to prevent blockages by trapping debris and preventing it from entering the drainage system.
The multifit outlet allows for easy connection to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications.
Overall, the McAlpine BT1 19mm Water Seal Adjustable Inlet Tubular Swivel 'P' Trap with Multifit Outlet is a reliable and flexible plumbing component that is commonly used in residential and commercial plumbing installations.
・ Available in 1¼" and 1½" sizes
・ 19mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Manufactured in polypropylene
The McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap with 1¼" Universal Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a basin.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" universal outlet, which allows for easy installation with a range of different waste pipe materials.
The adjustable inlet on the trap allows for easy installation in situations where the waste pipe is offset from the basin outlet. This helps to ensure a secure and reliable connection between the basin and the waste pipe.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap, simply connect the trap to the basin waste outlet using the adjustable inlet, ensuring a secure connection. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine OBT1 75mm Water Seal Adjustable Inlet Offset Basin Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 75mm Water Seal
・ 1¼" Universal Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Includes Cleaning Eye
・ Manufactured in polypropylene
The McAlpine X10 75mm Water Seal Straight Through Trap with 1¼" Multifit Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a variety of different appliances, such as sinks, baths, and showers.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" multifit outlet, which allows for easy installation with a range of different waste pipe materials.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine X10 75mm Water Seal Straight Through Trap, simply attach the trap to the waste outlet of the appliance using the 1¼" multifit outlet. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine X10 75mm Water Seal Straight Through Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 1¼" Inlet and Outlet
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Includes Cleaning Eye
・ Inlet and outlet connections are directly in-line allowing for neat plumbing behind basin pedestals
The McAlpine C10AV is a bottle trap designed for use with washbasins or sinks. It features a 75mm water seal and an adjustable inlet that allows it to be easily fitted to a variety of waste pipe sizes. The trap also includes a multifit outlet, making it compatible with a wide range of plumbing systems.
What sets the McAlpine C10AV apart is its anti-siphon or "silentrap" function. This means that the trap is designed to prevent the loss of the water seal and the ingress of foul air, even in the event of negative pressure or vacuum in the drainage system. This is particularly important in buildings with high-rise plumbing systems, as negative pressure can cause water to be sucked out of the trap, breaking the water seal and allowing unpleasant odours and gases to enter the building. The anti-siphon function of the McAlpine C10AV ensures that the water seal remains intact, preventing the ingress of foul air and maintaining the integrity of the plumbing system.
The McAlpine C10AV is a high-quality bottle trap that is easy to install and offers reliable performance. Its adjustable inlet and multifit outlet make it a versatile choice for a range of plumbing applications. The anti-siphon function ensures that the trap continues to function correctly, even in buildings with high-rise plumbing systems, making it an ideal choice for commercial or residential properties where maintaining the integrity of the plumbing system is critical.
・ Available in 1¼" and 1½" sizes
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
The McAlpine WCTRAP4P is a 50mm Water Seal Pushfit 'P' Trap designed for use in plumbing systems to prevent foul odors from entering a building or property. It is typically used in conjunction with sinks, baths, and other sanitaryware.
The 'P' trap design allows for a water seal to be maintained within the trap, which prevents foul smells and gases from traveling up through the plumbing system and into the building. The water seal also helps to prevent blockages by trapping debris within the trap, rather than allowing it to pass through the system.
The pushfit design of the McAlpine WCTRAP4P makes it easy to install without the need for any additional fittings or tools. The trap simply pushes onto the waste pipe and locks in place, providing a secure and reliable connection.
Overall, the McAlpine WCTRAP4P 50mm Water Seal Pushfit 'P' Trap is a high-quality plumbing component that is suitable for a wide range of applications in both commercial and residential settings.
The McAlpine CONFLEX-300 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. The purpose of this connector is to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-300 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
In addition to its flexibility and durability, the CONFLEX-300 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Overall, the McAlpine CONFLEX-300 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes. Its flexible design, corrosion-resistant materials, and built-in backflow prevention make it a popular choice among HVAC professionals and homeowners alike.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The McAlpine FLEX-JKS is a flexible fitting designed for use in plumbing systems. It is manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The FLEX-JKS features a BSP (British Standard Pipe) coupling nut on one end and a BSP male thread on the other end. This design allows the fitting to be easily installed in a variety of plumbing applications, including those that require a flexible connection between two pipes.
The flexible design of the fitting allows for some movement between the pipes, which can help to reduce stress on the plumbing system and prevent leaks or damage. The FLEX-JKS is made from high-quality materials and is designed to be durable and long-lasting, providing reliable performance over time.
Overall, the McAlpine FLEX-JKS is a versatile and reliable component of a plumbing system, particularly in situations where a flexible connection is required. Its BSP coupling nut and BSP male thread make it easy to install and compatible with a wide range of plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Offers complete flexibility for any required angle or offset
・ Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000
・ Approximate adjustable lengths below
The McAlpine WC-F23P is a straight flexible WC connector designed for use with 97-107mm inlet and 110mm plain end outlet waste pipes. It is made from high-quality, durable materials to ensure a long-lasting, reliable connection. The flexibility of the connector allows for easy adjustment and maneuverability during installation, making it ideal for use in tight spaces or where access is limited. This product is designed to provide a secure and leak-free connection between the toilet pan and the waste pipe, and it can be used for both horizontal and vertical installations.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
The McAlpine WC-CON8F-S-BTW is a flexible WC connector designed for use with back to wall toilet pans. It features a 97-107mm inlet and a 90° bend for easy installation in a horizontal position. The connector is made from high-quality, durable materials to ensure a long-lasting, reliable connection. The flexibility of the connector allows for easy adjustment and maneuverability during installation, making it ideal for use in tight spaces or where access is limited. This product is designed to provide a secure and leak-free connection between the toilet pan and the waste pipe.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
The McAlpine WC17-90 is a wall flange designed for use with rigid WC connectors. It provides a secure and reliable connection between the WC connector and the wall, ensuring efficient and effective waste disposal.
The WC17-90 wall flange features a 110mm outlet and is suitable for use with most standard WC connectors. It is made from high-quality materials, ensuring reliable performance and durability over time. The wall flange is also designed to be easy to install, with a simple and straightforward design that allows for quick and efficient connection to the WC connector and the wall.
Overall, the McAlpine WC17-90 wall flange is a high-quality plumbing fitting that provides a reliable and efficient connection between rigid WC connectors and the wall. Its strong and durable construction, 110mm outlet, and easy-to-install design make it a popular choice among plumbing professionals and DIY enthusiasts alike.
・ Available for Rigid WC Connectors, 4"/110mm Soil Pipe or Rigid WC Connectors with Plain End Outlet, and Flexible WC Connectors
The McAlpine White Plastic Cover Plate & Insert Tube Tsgwcover+Tube is a plumbing component designed to provide a neat and tidy finish to a wall or floor-mounted waste pipe. It consists of a white plastic cover plate and an insert tube, both of which are made from durable and high-quality materials.
The cover plate is designed to be screwed or glued onto a wall or floor surface to conceal the waste pipe and create a clean and finished look. The insert tube is designed to fit inside the waste pipe, providing additional support and preventing blockages.
This product is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings, and is easy to install and maintain.
The McAlpine TSG1SS-SL-NSC is a trapped gully designed for use in drainage systems. It features a 75mm water seal, a clamp ring and a cover plate, a 2" horizontal outlet, and a 2" x 1½" socket reducer. The gully is made of stainless steel, which provides durability and resistance to corrosion.
The McAlpine TSG1SS-SL-NSC trapped gully is designed to prevent foul odors and gases from escaping into the atmosphere through the drainage system. It is suitable for use in both domestic and commercial plumbing systems.
The clamp ring and cover plate of the gully make it easy to install and maintain. The 2" horizontal outlet and 2" x 1½" socket reducer provide compatibility with a wide range of plumbing systems.
Overall, the McAlpine TSG1SS-SL-NSC trapped gully is a reliable and essential component in any plumbing installation.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-Reducer is a plumbing accessory designed for use in drainage systems. It is a trapped gully outlet reducer that has a 2" x 1.5" socket reducer, allowing for easy connection to various plumbing systems.
The trapped gully outlet reducer is made of durable materials, ensuring long-lasting performance and resistance to corrosion. It is easy to install and is suitable for use in both domestic and commercial plumbing systems.
The McAlpine TSG1-Reducer can be used with the McAlpine TSG1-Trapped Gully and other compatible plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
The McAlpine T23L is a blank cap fitting that is designed to seal off the end of a 1 1/2-inch pipe or fitting in the Surefit range of plumbing fittings and pipes made by McAlpine.
The T23L blank cap features a push-fit connection on one end, which allows for quick and easy installation. The cap is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when fitted onto the end of a pipe or fitting.
The T23L blank cap is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T23L blank cap is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T23L blank cap can be used to temporarily seal off a pipe or fitting during maintenance or repair work, or as a permanent seal for pipes or fittings that are no longer in use.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
