JG Speedfit conversion connector push-fit fitting that enables imperial and metric pipes to be connected by converting the pipe size from metric to imperial. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The McAlpine 228532 Blanking Plug is the perfect solution for blocking off unused outlets on traps and fittings. Whether you're completing a plumbing project or just need to temporarily close off a drain, this blanking plug is easy to install and incredibly effective.
Made from high-quality materials, this blanking plug is built to last. It can withstand the rigors of everyday use and is resistant to corrosion and wear. Its sturdy construction ensures that it will remain securely in place, providing a reliable seal for your plumbing system.
This blanking plug is incredibly easy to install, requiring no special tools or expertise. Simply insert it into the outlet you want to block off, and it will provide a secure seal that prevents any leaks or drainage issues. It's suitable for use with a wide range of traps and fittings, making it a versatile addition to your plumbing toolkit.
If you're looking for a reliable and effective way to block off unused outlets on your plumbing system, the McAlpine 228532 Blanking Plug is the perfect choice. With its durable construction, easy installation, and reliable performance, this blanking plug is a must-have for any plumbing project.
・ Constructed from LDPE
Pack of 3
The Mcalpine Spanner is designed specifically for 70/85 mm shower trap flanges, making installation and maintenance a breeze. This essential tool ensures a secure fit and reliable performance.
Designed for 70/85 mm shower trap flanges - Outer measurement
Durable construction for long-lasting use
Easy to use for both DIY enthusiasts and professionals
Ensures a secure and reliable fit
Ideal for installation and maintenance tasks
The Mcalpine Bath Clicker Waste Plug Chrome is designed for efficient drainage in your bath. With a sleek chrome finish, it adds a touch of elegance while ensuring functionality.
High-Quality Chrome Finish for Durability
70mm Size Fits Standard Bath Waste Systems
Easy to Install with Push Fit Connection
Reliable Clicker Mechanism for Smooth Operation
Perfect for Replacing Old or Damaged Bath Wastes
The Mcalpine Pop-Up Plug Chrome 60mm is designed for efficient drainage in basins. Its sleek chrome finish adds a modern touch to your bathroom while ensuring reliable performance.
High-Quality Chrome Finish: Durable and stylish for any basin.
Easy Installation: Designed for quick and hassle-free setup.
Perfect Fit: Specifically made for 60mm waste outlets.
Reliable Performance: Ensures effective drainage and prevents leaks.
Versatile Use: Ideal for both residential and commercial applications.
McAlpine V-Seal For Pop Up Plug & Stemball Assemblies. Spare washer ONLY for basket strainer plugs 56mm outer diameter, 29mm internal diameter & 5.5mm thickness.
The John Guest Speedfit EPDM O-Ring 22mm is designed for reliable sealing in various plumbing applications. Made from high-quality EPDM material, this O-ring ensures durability and longevity.
High-Quality EPDM Material for Enhanced Durability
22mm Size for Versatile Applications
Ideal for Plumbing and Sealing Needs
Easy to Install and Replace
Compatible with John Guest Speedfit Products
The John Guest Speedfit 12mm Inserts TSM1209S are essential components for creating secure and reliable plumbing connections. Designed for ease of use, these inserts ensure a tight fit and are compatible with various pipe systems.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and straightforward installation without special tools.
Versatile Use: Suitable for a range of plumbing applications, ensuring flexibility.
Reliable Connection: Provides a secure fit to prevent leaks and ensure system integrity.
Compatible Design: Works seamlessly with other Speedfit products for enhanced functionality.
Pack of 50
The John Guest Speedfit 12mm Inserts TSM1209S are essential components for creating secure and reliable plumbing connections. Designed for ease of use, these inserts ensure a tight fit and are compatible with various pipe systems.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and straightforward installation without special tools.
Versatile Use: Suitable for a range of plumbing applications, ensuring flexibility.
Reliable Connection: Provides a secure fit to prevent leaks and ensure system integrity.
Compatible Design: Works seamlessly with other Speedfit products for enhanced functionality.
Pack of 10
The John Guest Speedfit 12mm Inserts TSM1209S are essential components for creating secure and reliable plumbing connections. Designed for ease of use, these inserts ensure a tight fit and are compatible with various pipe systems.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and straightforward installation without special tools.
Versatile Use: Suitable for a range of plumbing applications, ensuring flexibility.
Reliable Connection: Provides a secure fit to prevent leaks and ensure system integrity.
Compatible Design: Works seamlessly with other Speedfit products for enhanced functionality.
Pack of 30
The John Guest Speedfit 12mm Inserts TSM1209S are essential components for creating secure and reliable plumbing connections. Designed for ease of use, these inserts ensure a tight fit and are compatible with various pipe systems.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and straightforward installation without special tools.
Versatile Use: Suitable for a range of plumbing applications, ensuring flexibility.
Reliable Connection: Provides a secure fit to prevent leaks and ensure system integrity.
Compatible Design: Works seamlessly with other Speedfit products for enhanced functionality.
Pack of 20
John Guest stem elbow push-fit fitting connects two John Guest push-fit fittings to create a 90° swivel type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 2
Quickly and easily reduces the diameter of a John Guest push-fit fitting
John Guest black push-fit acetal reducer fitting reduces a John Guest push-fit connection port. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Pack of 4
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Helps make the pipe more rigid when a side load is applied
Suitable for hot and cold water and central heating systems
Pack of 5
John Guest white polypropylene push-fit reducing straight connector fitting connects two unequal metric sized pipes/tubes. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with EPDM seals, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), including water treatment applications. All John Guest fittings are manufactured and assembled in the UK.
Pack of 10
McAlpine 1�" White Anti-Syphon adaptor whose valve neutralises negative syphonic pressure and eliminates gurgling. Can be used with a bottle trap on it's own. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling Multifit Compression Outlet suits all plastic, copper and lead pipes AAV Trap Adaptor makes any Trap Anti-Syphon Manufactured in ABS Available in Black or White
McAlpine 1�" Black Anti-Syphon adaptor whose valve neutralises negative syphonic pressure and eliminates gurgling. Can be used with a bottle trap on it's own. Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling Multifit Compression Outlet suits all plastic, copper and lead pipes AAV Trap Adaptor makes any Trap Anti-Syphon Manufactured in ABS Available in Black or White
McAlpine Shower trap and Flexible connector finished in White is designed to provide efficient drainage for shower trays. The flexible connector provides flexibility for a variety of plumbing configurations. Suitable for shower trays with a 90mm waste hole With Flexible connector for ultimate flexibility to suit any angle 50mm Water Seal Shower Trap 1�" BSP Thread
McAlpine Shower trap and Flexible connector finished in Brushed Brass is designed to provide efficient drainage for shower trays. The flexible connector provides flexibility for a variety of plumbing configurations. Suitable for shower trays with a 90mm waste hole With Flexible connector for ultimate flexibility to suit any angle 50mm Water Seal Shower Trap 1�" BSP Thread
McAlpine 1200mm Linear Shower Channel - Square Grid Pattern in Stainless Steel Available in 6 cover plate lengths from 548mm to 1148mm Choice of 3 finishes - simple brushed or polished metallic finish or a grid with a brushed finish. Highest quality grade 304 Stainless Steel cover plate Cover plate reversible to accommodate tiles up to 8mm Frame height adjustable to suit tiles up to 16mm
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20C. At elevated temperatures (50C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified
Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.
If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
14mm replacement appliance connector for use with McAlpine appliance traps WM14,WM11,WM12, WM15, V33WM, SSK1, SSK2, SSK3, SK1, SK1A, SK2, SK2A & SK3 for connecting appliances like Fridges, Tumble Dryers, Air-conditioning, water softeners etc.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).
Flexible and robust LLDPE (Linear low density polyethylene) pipe
Suitable for air and pneumatics, cold, and intermittent hot water applications
Broad chemical compatibility
Colour coded for easy identification of service type
FDA and NSF certified.
Length - 10m
Simplify your kitchen plumbing setup with the McAlpine Black Sink Trap with Twin 135 degree Domestic Appliance Nozzles. The ideal solution for connecting your washing machine, dishwasher, or other domestic appliances to the waste outlet. The twin 135 degree nozzles allow flexible, angled connections while maintaining a sleek and modern look.
Effortlessly connect a double bowl kitchen sink with the McAlpine Black Double Bowl Sink Kit. Designed for durability and efficient drainage, this kit is perfect for both residential and commercial kitchens, offering reliability with a touch of style.
Creates a rigid connection when fitting Speedfit pipe to a Speedfit or compression fitting. Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Pack of 5
Main Product Description:
The FloPlast 50mm Round Downpipe Bracket is a versatile clipping solution designed to secure 50mm downpipe lengths and fittings to a wall, supporting joints effectively. This black bracket is part of the MiniFlo system, offering a smaller profile that caters to various applications while maintaining practicality and ease of installation.
Features:
- Designed specifically for securing 50mm round downpipe and joints to walls.
- Part of the MiniFlo system, which provides a smaller profile compared to traditional round line systems.
- Suitable for use with different types of gutters, including those made from aluminum, cast iron, and steel.
Benefits:
- Enhances the stability and durability of downpipe installations by securing them to walls.
- Supports joints efficiently, ensuring proper alignment and preventing leaks.
- Offers flexibility in terms of compatibility with various gutter materials.
Main Product Description:
The FloPlast 65mm Square Flush Pipe Clip is a versatile and reliable solution for securing downpipes to various surfaces. This clip is designed to provide a flush fit, ensuring a seamless appearance while maintaining functionality. With its robust construction and high-quality materials, it offers durability and resistance to weather conditions. It's an essential component for any rainwater system installation, offering both practicality and aesthetic appeal.
Features:
- Available in a bag of 5 clips for convenience and bulk purchase options.
- Designed to securely hold 65mm square downpipes against walls or other surfaces.
- Constructed from high-quality PVC material for strength and durability.
- Benefits from a 10-year performance and color guarantee for peace of mind.
- Consistent finish and color, requiring minimal maintenance.
- Lightweight design allows for easy installation.
- Suitable for use with various FloPlast Rainwater System components.
Benefits:
- Provides a flush fit for a neat appearance.
- Enhances the overall look of rainwater systems by blending into the background.
- Helps prevent water leakages and ensures proper drainage.
- Adds longevity and reliability to the rainwater system due to its robust construction.
- Reduces the need for frequent repairs or replacements, saving time and money.
Main Product Description: The FloPlast 114mm Square to 112mm Round Adaptor is a black connector that securely joins a section of 114mm square guttering to a 112mm round guttering system. It provides a cost-effective solution suitable for both new construction and renovation projects, ensuring compatibility with various major brands.
Features:
- Secure connection between 114mm square and 112mm round gutter systems.
- Suitable for use in new build and refurbishment applications.
- Compatibility with multiple major guttering brands.
- Pre-lubricated seal for improved installation process.
Benefits:
- Enhances the aesthetic appeal by seamlessly connecting different types of gutters.
- Provides a durable and long-lasting solution due to its PVC-U material.
- Easier installation process with the pre-lubricated seal.
Main Product Description:
Introducing the FloPlast Half Round 75mm Gutter Fascia Bracket in black, designed for seamless integration with your gutter system. This high-quality bracket is perfect for enhancing the appearance of your property while ensuring reliable performance. Its sleek design complements various architectural styles, making it an excellent choice for both modern and traditional homes.
Key Features:
- Dimensions: 75mm diameter, suitable for mini gutters.
- Material: High-grade plastic for durability and resistance to weather conditions.
- Mounting System: Screwed to the fascia board using countersunk screws, providing secure attachment.
- Clip Design: Designed for easy installation and clipping into place.
Benefits:
- Aesthetic Appeal: Enhances the visual appeal of your gutter system, blending seamlessly with your home's exterior.
- Durable: Constructed from robust materials that can withstand harsh weather conditions.
- Easy Installation: Can be easily installed with minimal effort and tools.
Main Product Description:
Introducing the FloPlast Half Round 75mm Gutter Union Black, designed for seamless integration into your rainwater system. This union bracket is perfect for various applications, including garages, sheds, and other structures, offering a reliable and durable solution for managing rainwater flow.
Features:
- Waterproof seal technology through downward clip compression on a small rubber seal
- Compatible with 75mm half round gutters
- Small system design suitable for garages, sheds, and similar buildings
Benefits:
- Enhanced durability and reliability
- Seamless integration into existing systems
- Suitable for a variety of applications, including garages, sheds, and more
