Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
Varilight V-Pro for Standard and LED loads We have carefully selected our products that are quality standard of great value. With us you are always in good hands.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmer are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
V-dim dimmer
_V-dim dimmer
_1-Gang 1-way rotary dimmer 1 x 60-400W
_V-dim dimming technology
_Ideal for incandescent lighting including mains and low voltage Halogen
_Durable White Plastic
_wattage: 400
Varilight 100W V-Pro Power Grid dimmer insert suitable for dimming LED downlights and GU10 LEDs.
_Varilight PowerGrid Insert
_2 Way Push-On Push-Off
_Wattage: 100W of LED.
_Extending flexibility and choice for the Varilight range
The popular Eclique 2 from Varilight is now available in a grid format. This means you can now mix masters, slaves and ordinary switches all on the same plate
_Varilight Eclique 2 PowerGrid Insert
_2 Way Push-On Push-Off. Allows 2 way dimming when linked to a slave on the same circuit.
_Wattage: 100W of LED.
_Available in polished chrome or stainless steel finishes.
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_2-Way Push Switch
_2-Way Push-On/Off Switch Module (Dummy Dimmer) 6A (1 Grid Space)
_Modules suitable for any PowerGrid faceplate
_Identical in appearance to dimmer switch without dimming function
_1- or 2-way switching
Range: Deta. Finish: Black. : Grid Adaptor Pack. Barcode: 5021575292961. Dimensions: 56x25x10mm. Faceplate Depth: *. Net Weight: 38g. Gross Weight: 40g.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 2-Way Single Pole Key Switch
_Modules suitable for all PowerGrid frontplates
_1- or 2-way switching
_Key switching for security
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Key Switch
_Modules suitable for all PowerGrid frontplates
_Double pole switching
_Key switching for security
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Key Switch
_Modules suitable for all PowerGrid frontplates
_Double pole switching
_Key switching for security
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Switch 'Washing Machine'
_Modules suitable for all PowerGrid frontplates
_Engraved with 'Washing Machine' to enable easier identification
_Double pole switching
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Fuse Holder
_13A Fuse Holder
_Modules suitable for all PowerGrid frontplates
_Holds standard 25.4x6.4mm fuse
_Replaceable 13A fuse included
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Intermediate Rocker Switch
_10A Intermediate Switch
_Modules suitable for all PowerGrid frontplates
_Intermediate switch enables 3-way switching
_Suitable for controlling both mains and low voltage lighting
