V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Box ContainsJQDP254W
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
: V-Plus Module : 2-Way Push-on Push-off Replacement Dimmer Module Kit 60-700W Features: Can be used to replace dimmer modules in existing faceplates or in the Matrix dimmer grid system. V-Plus intelligent dimming technology. Soft start feature and intelligent overload protection. Dimensions: 64x58x46mm (Click here to see full dimensions) Product Weight (g): 50 Operating Voltage: 220/250V AC Maximum Load Rating: Halogen; 700W Application Advice: Not suitable for motors or fans Varilight Guarantee (years): 10 Price includes VAT.
_V-Plus Module
_2-Way Push-on Push-off Replacement Dimmer Module Kit 60-700W
_Can be used to replace dimmer modules in existing faceplates or in the Matrix dimmer grid system
_V-Plus intelligent dimming technology
_Soft start feature and intelligent overload protection
Mounting frames known as yokes for use with Varilight Power Grid, available in 1,2,3 and 4 gang. Allows switches to be mounted behind the plates.
_Varilight Power Grid frames (1-4 gang)
_Extending flexibility and choice for the Varilight range
_Compliments existing Dimension accessories and Data Grid
_Requires additional Power Grid plate and switches
Mounting frames known as yokes for use with Varilight Power Grid, available in 1,2,3 and 4 gang. Allows switches to be mounted behind the plates.
_Varilight Power Grid frames (1-4 gang)
_Extending flexibility and choice for the Varilight range
_Compliments existing Dimension accessories and Data Grid
_Requires additional Power Grid plate and switches
Finish: Polished Brass. : Knob. Insert/Knob Colour: Polished Brass. Barcode: 5021575951165. Dimensions: 21x20x15mm. Net Weight: 8g. Gross Weight: 10g.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
(Alternative Stock Code: XVPC) 6A Pull Switch Brass Effect, 1- or 2-way switching using a pull cord, Can be installed in bathrooms, toilets and shower rooms (IP20), Can be installed in bathrooms, toilets and shower rooms (IP20).Dimensions
Height: 84mm
Width: 84mm
Depth: 35mm
Specialising in dimmer switches (including LED dimmers for dimmable LEDs), decorative switches, decorative sockets and decorative wiring accessories Varilight have a comprehensive range which now includes our award-winning dimmable CFLs and dimmable transformers. With decorative finishes ranging from contemporary Brushed Steel to classical Georgian Brass we have a finish to suit every design scheme with a variety of faceplate styles available, including Classic bevel-edged and Classic rope-edged faceplates, as well as the minimalist Ultraflat and sophisticated Dimension Screwless ranges. Varilight is the brand name of Doyle & Tratt Products Ltd, the leading British manufacturer of dimmer switches and decorative electrical wiring accessories."
_SKU: YBS.C
_1-Gang
_Colour:
_Plate Style:
_Back Box Depth: N/A
The Varilight Urban range features a contemporary bevel-edge plate style with an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Toggle Switch
_3-Gang 10A 1- or 2-Way Toggle Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Bevelled edge faceplate
The Varilight Urban range features a contemporary bevel-edge plate style with an 8mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 91mm x 91mm. Double plate size: 91mm x 150mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. TV socket for use with male co-axial plugs. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). Triple pole switching. DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_2-Way Toggle Switch
_2-Gang 10A 1- or 2-Way Toggle Switch
_1- or 2-way switching
_Suitable for controlling both mains and low voltage lighting
_Bevelled edge faceplate
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Round Pin Socket
_1-Gang 5A Round Pin Socket
_For use in lighting circuits up to 1150W in conjunction with wall switches
_Curved edge faceplate
Range: PowerGrid Urban. Finish: Polished Copper. : Grid Pack (Plate and Yoke). : 3-Gang PowerGrid Plate including Yoke (Twin Plate). Features: Create your own switch combinations. Varilight Urban: Inspirational finishes for stylish spaces. Dimensions: 91x150x*mm. Faceplate Depth: 8mm. Product Weight (g): 230. Fixing Centres: 120.6mm. Depth from Mounting Face: Module Dependent. Operating Voltage: 220/250V AC. Maximum Load Rating: N/A. Varilight Guarantee (years): 10.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
Range: Vogue. Finish: Matt White. : Grid Pack (Plate and Yoke). Barcode: 5021575122305. Dimensions: 91x91x*mm. Faceplate Depth: 8mm. Net Weight: 126g. Gross Weight: 128g. Fixing Centres: 120.6mm. Depth from Mounting Face: Module Dependent. Recommended Back Box Depth: N/A. Operating Voltage: 230v 50Hz. Maximum Load Rating: N/A. Maximum Current Rating: -. Terminal (Earth) Diameter: 3.3mm: Capacity: 3 x 1.5mm_
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fan Isolating Rocker Switch
_10A Fan Isolating Switch (3 Pole)
_Triple pole switching
_Wide rocker for easy operation
_Curved edge faceplate
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fan Isolating Rocker Switch
_10A Fan Isolating Switch (3 Pole)
_Triple pole switching
_Wide rocker for easy operation
_Curved edge faceplate
Range: Vogue. Finish: Matt White. : Blank Plate. Barcode: 5021575122244. Dimensions: 91x150x11mm. Faceplate Depth: 8mm. Net Weight: 199g. Gross Weight: 202g. Fixing Centres: 120.6mm. Depth from Mounting Face: Module Dependent. Recommended Back Box Depth: 16mm. Operating Voltage: N/A. Maximum Load Rating: N/A. Maximum Current Rating: -. Terminal (Earth) Diameter: 3.3mm: Capacity: 3 x 1.5mm_
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
Specialising in dimmer switches (including LED dimmers for dimmable LEDs), decorative switches, decorative sockets and decorative wiring accessories Varilight have a comprehensive range which now includes our award-winning dimmable CFLs and dimmable transformers. With decorative finishes ranging from contemporary Brushed Steel to classical Georgian Brass we have a finish to suit every design scheme with a variety of faceplate styles available, including Classic bevel-edged and Classic rope-edged faceplates, as well as the minimalist Ultraflat and sophisticated Dimension Screwless ranges. Varilight is the brand name of Doyle & Tratt Products Ltd, the leading British manufacturer of dimmer switches and decorative electrical wiring accessories.
_SKU: XYDB.BG
_2 Gang
_Colour: Beryl Green
_Plate Style: Lily
_Back Box Depth: 25mm
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_TV Socket
_1-Gang TV Socket, Co-Axial
_TV socket for use with male co-axial plugs
_Curved edge faceplate
The Varilight Lily collection offers a range of painted plates in pastel and primary colours on a curved edge plate with a 7mm depth from front to back of plate. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 88mm x 148mm. 13A Plug sockets: Require a 25mm deep wall box. USBÕs are 2.1A. Rocker Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 16mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 25mm wall box. 5 Amp Socket: Require a 25mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). 240V accepts British and Continental round pin and Australia flat-pin. 115V accepts Continental two-pin and America NEMA. Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 25mm deep wall box. 13 Amp Double pole. TV Socket: Require a 16mm deep wall box. Fan Isolator: Require a 16mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 25mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 25mm deep wall box.
_Fused Spur
_13A Switched Fused Spur + Neon
_Double pole switching
_Neon indicator light
_Holds standard 25.4x6.4mm fuse
Range: Urban. Finish: Polished Copper. : Intermediate Rocker Switch. : 1-Gang 10A Intermediate Rocker Switch. Insert/Rocker Colour: Black Rocker. Features: Intermediate switch enables 3-way switching. Suitable for controlling both mains and low voltage lighting. Bevelled edge faceplate. Decorative copper finish with protective lacquer to prevent tarnishing. Dimensions: 91x91x25mm. Faceplate Depth: 8mm. Product Weight (g): 130. Fixing Centres: 60.3mm. Depth from Mounting Face: 11.2mm. Recommended Minimum Back Box Depth: 16mm. Operating Voltage: 220/250V AC. Maximum Load Rating: 10A. Application Advice: Please note this product is not part of our Antimicrobial Copper range. Varilight Guarantee (years): 10.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
