Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet.These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LEDlamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on thelink in the product description below.
_V-Pro dimmers are suitable fordimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standardbulbs, GU10 and mains halogen
_Fits a 25 mm wall box
Dimmer will give you complete control over your lighting ambience, thanks to its intelligent 2-way control mechanism and is also available in number of finishes acting as both a key aesthetic and technical component of your interior design. The maximum load per gang is 100 watts or 10 lamps (whichever is lower). The minimum load per gang should not be less than 10 watts or 2 LEDs.
_LED compatible
_2 way control mechanism
_Trailing edge technology
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_V-Plus Dimmer
_1-Gang 2-Way Push-On/Off Rotary Dimmer 1 x 200-1400W (Twin Plate)
_V-Plus intelligent dimming technology
_Ideal for mains and low voltage halogen lighting
_Soft start feature and intelligent overload protection
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Blanking Insert
_1-Gang Blanking Insert
_Modules suitable for all PowerGrid frontplates
_Blanking module
_Create your own switch combinations
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Switch + Neon
_Modules suitable for all PowerGrid frontplates
_Double pole switching
_Neon indicator light
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_20A Switch
_20A 1-Way Double Pole Switch 'Oven'
_Modules suitable for all PowerGrid frontplates
_Engraved with 'Oven' to enable easier identification
_Double pole switching
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_Retractive Switch
_10A 2-Way & Off Retractive Switch
_Modules suitable for all PowerGrid frontplates
_Retractive, push to make switch
_For use with blinds, bells and applications where a momentary electric signal is required
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
_Dimmable LED load 10w-120w (per dimmer)
_Suitable for 1-10 good quality LED lamps per dimmer module
_For Incandescent bulbs, mains, eco and L/V halogen bulbs please click on the link in the product description below.
_V-Pro dimmers are suitable for dimmable LEDs, dimmable ESLs, electronic transformers, trailing edge, standard bulbs, GU10 and mains halogen
_Fits a 25 mm wall box
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
Varilight Eclique dimmer switches are suitable for dimming LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with halogen and incandescent. Unlike conventional rotary dimmer switches (see V-Pro), the Eclique range has touch dimmers.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
_With soft start and automatic overload protection.
_Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
The Varilight Screwless low profile collection offers minimalism with style and a flawless finish. The plate just clips on after installation. Each switch does need to be earthed and is designed to fit into UK standard wall boxes. Covered by the Varilight 10 year guaranty. Single plate size: 86mm x 86mm. Double plate size: 86mm x 147mm. 13A Plug sockets: Require a 35mm deep wall box. USBÕs are 2.1A. Rocker & Toggle Light Switches: 2 way (unless stated as intermediate), 10A rated and require a 25mm deep wall box. Halogen & LED Dimmers: 2 Way. Please check product title for dimmer spec and maximum and minimum load. Require a 35mm wall box. 5 Amp Socket: Require a 35mm deep wall box. Shaver Socket: Require a 47mm deep wall box. Dual Voltage Shaver Socket 240V/115V. Suitable for use in bathrooms, toilets and shower rooms (IP41). Cooker Switch: Require a 35mm deep wall box. 45 Amp Double pole. Fused Spur: Require a 35mm deep wall box. 13 Amp Double pole. TV Socket: Require a 25mm deep wall box. 20 Amp: Require a 25mm deep wall box. Fan Isolator: Require a 35mm deep wall box. 10A Fan Isolating Switch (3 Pole). DataGrid Plates: Clip in any combination of DataGrid modules (need to be bought from us separately). Compatible with all standard Euro data modules (Varilight, Triax, RetroTouch etc). Create your own data combinations. Touch/Remote LED Dimmers: V-Pro IR (infra-red) Dimmers. 0-100W (1-10 LEDs). Require a 35mm deep wall box. V-Pro intelligent dimming technology. Touch control or remote control from dedicated handset (not included, Varilight YRC8 can be bought separately), or can use a spare button on an existing handset (e.g. TV remote). 1-way or multi-way when used with V-Pro IR dimming slave unit(s). Soft start feature and intelligent overload protection. Touch Slaves: Can not be used on their own, must be used with a master dimmer to make a 2 way or multi-way circuit. Require a 35mm deep wall box.
_V-Pro Multi-Point (formerly Eclique2) Dimmer
_1-Gang Tactile Touch Control Dimming Slave for use with Multi-Point (formerly Eclique2) Master on 2-Way Circuits
_V-Pro intelligent dimming technology
_Soft start feature and intelligent overload protection
_Use with touch & remote master Multi-Point dimmers in multi-way circuits
Varilight Eclique dimmer switches are suitable for dimming LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with halogen and incandescent. Unlike conventional rotary dimmer switches (see V-Pro), the Eclique range has touch dimmers.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. For 2 way dimming you need to add an Eclique slave dimmer as it won't work with a normal 2 way light switch.
_With soft start and automatic overload protection.
_Can reprogrammed to adapt to different lighting circuits by pressing your finger on the button for 12 seconds.
The British made Varilight V-Pro is an award winning, high quality universal dimmer switch that is compatible with LED lamps and downlights. This includes mains voltage GU10 LEDs and integrated LED downlights, it also works with CFL, halogen and incandescent.
_Available in 1, 2, 3 or 4 gang options.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
British made LED Dimmer is an award winning, high quality dimmer switch, compatible with most mains and low voltage spotlights and bulb range, including dimmable GU10 LED bulbs. The dimmer is controlled by a state-of-the-art microprocessor that offers sophisticated overload protection, meaning if you mistakenly connect your dimmer to too many lights or transformers, it will protect itself from failure. This dimmer will give you complete control over your lighting ambience, thanks to its intelligent 2-way control mechanism and is also available in number of finishes acting as both a key aesthetic and technical component of your interior design. The maximum load per gang is 100 watts or 10 lamps (whichever is lower). The minimum load per gang should not be less than 10W or 2 LEDs.Box ContainsDIM-2C-2-C
_100 watt maximum - 10 watt minimum load
_2 way control mechanism
_Trailing edge technology
Specialising in dimmer switches (including LED dimmers for dimmable LEDs), decorative switches, decorative sockets and decorative wiring accessories Varilight have a comprehensive range which now includes our award-winning dimmable CFLs and dimmable transformers. With decorative finishes ranging from contemporary Brushed Steel to classical Georgian Brass we have a finish to suit every design scheme with a variety of faceplate styles available, including Classic bevel-edged and Classic rope-edged faceplates, as well as the minimalist Ultraflat and sophisticated Dimension Screwless ranges. Varilight is the brand name of Doyle & Tratt Products Ltd, the leading British manufacturer of dimmer switches and decorative electrical wiring accessories.
_SKU: IQP401W
_1-Gang
_Colour: White Plastic
_Plate Style: White
_Back Box Depth: 25mm
Varilight White 2 Gang 400W 2-Way Push-On Push-Off Dimmer V-Dim We have carefully selected our products that are quality standard of great value. With us you are always in good hands.
_V-Dim Dimmer
_2-Gang 2-Way Push-On/Off Rotary Dimmer 2 x 60-400W
_V-Dim dimming technology
_Ideal for incandescent lighting including mains and low voltage halogen
_Durable white plastic
Specialising in dimmer switches (including LED dimmers for dimmable LEDs), decorative switches, decorative sockets and decorative wiring accessories Varilight have a comprehensive range which now includes our award-winning dimmable CFLs and dimmable transformers. With decorative finishes ranging from contemporary Brushed Steel to classical Georgian Brass we have a finish to suit every design scheme with a variety of faceplate styles available, including Classic bevel-edged and Classic rope-edged faceplates, as well as the minimalist Ultraflat and sophisticated Dimension Screwless ranges. Varilight is the brand name of Doyle & Tratt Products Ltd, the leading British manufacturer of dimmer switches and decorative electrical wiring accessories.
_SKU: GKP180W.MG
_1-Gang
_Colour: White
_Plate Style: Multi-Grid
_Back Box Depth: 35mm
Varilight Power Grid dimmer module that can be used to dim larger amounts LED downlights and dimmable GU10 LEDs than V-Pro. Varilight V-Com module is suitable for dimming 180W of LED without needing to be de-rated like other conventional dimmer switches.
_1 way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique 2 range which utilises a master and slave touch dimmer.
_Control knob has push on / off function.
_With soft start and automatic overload protection.
_Contains leading edge V-Com dimming technology
Varilight V-Pro High Power Series for either 1 or 2 Way circuits, 0-300 Watt Push On/Off Rotary LED Trailing Edge Power Grid Dimmer for Varilight Power Grid Plates, for a max 20 most good quality LEDs. The dimmer has special software with the ability to adjust the minimum brightness, and change the driving mode to Leading Edge. Range: Power Grid Finish: White : V-Pro High Power Dimmer Insert/Knob Colour: White Knob Dimensions: 54x26x26mm Faceplate Depth: N/A Product Weight: 170g Fixing Centres: N/A Recommended Back Box Depth: 35mm Operating Voltage: 220/250V AC Maximum Load Rating: LED: 300W (Halogen = 100 watt, Mixed Loads = 100 watt) Maximum Current Rating: 2.2A Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm_ Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed. Applicable Safety Standard: BS EN 60669-2-1
_light switch
Only suitable for use with Varilight PowerGrid plates, not suitable for other grid plate makes (different size to MK).
_V-Pro Dimmer
_2-Way Push-On/Off Rotary LED Dimmer 0-300W (1-20 LEDs) (1 Grid Space)
_V-Pro intelligent dimming technology
_Soft start feature and intelligent overload protection
_Adjustable minimum brightness setting and choice of driving modes
Trailing edge grid dimmer switch module that can be used to upgrade or modify existing dimmer switches in grid systems. This module will dim a variety of lighting loads including LED, CFL and halogen. V-Pro technology provides a smooth, flicker free dimming operation when dimming LEDs. V-Pro technology allows for a wider range LEDs to be dimmed without a recuction in the dimming range. The minimum load is just 2.5W when used with LEDs.
_Max wattage: 100W of LEDs
_Max 10 LEDs
_LED: 1 to 10 LED, more can be dimmed with lower wattage LEDs
_Specification
Varilight 100W V-Pro Power Grid dimmer insert suitable for dimming LED downlights and GU10 LEDs.
_Varilight PowerGrid Insert
_2 Way Push-On Push-Off
_Wattage: 100W of LED.
_Extending flexibility and choice for the Varilight range
Varilight 100W V-Pro Power Grid dimmer insert suitable for dimming LED downlights and GU10 LEDs.
_Varilight PowerGrid Insert
_2 Way Push-On Push-Off
_Wattage: 100W of LED.
_Extending flexibility and choice for the Varilight range
Slave switches can only be used when connected to the same circuit as a master. They provide 2 way dimming. Or by adding other slaves you can get 3 way dimming or more.
_Varilight Eclique 2 PowerGrid Insert
_2 Way Push-On Push-Off. Allows 2 way dimming when linked to a slave on the same circuit.
_Wattage: 100W of LED.
_Available in polished chrome or stainless steel finishes.
Range: MultiGrid Module. Finish: White. : Modules for MK, GET, Crabtree Grids. Insert/Knob Colour: White Insert. Barcode: 5021575968958. Dimensions: 24x23x53mm. Net Weight: 48g. Gross Weight: 50g.
_Varilight are a UK manufacturer with a 10 year warranty on all products.
_The entire range fits into UK standard wall boxes.
_Complete range of switches and sockets available in each finish.
