The DEWALT DCD1007 Hammer Drill has a brushless motor which delivers enhanced efficiency as well as durability. Delivers precise control via a variable speed trigger. The 3-speed transmission and electronic torque control lets you customise the performance, so you always get the right setting for drilling and screwdriving. Its compact design incorporates a comfortable and ergonomic grip design. The Perform and Protect E-Clutch system which will shut down the tool if it detects any kind of bind up situation. This protects the tool from overloading. There is also a handy LED work light, enabling work in any lighting condition. Supplied with: 1 x Side Handle. 2 x 18V 5.0Ah POWERSTACK™ Li-ion Batteries. 1 x DCB1104 Battery Charger. 1 x TSTAK Case. Specifications: Chuck: 13mm.No Load Speed: 0-450/0-1200/0-2000/min. Impact Rate: 0-8,500/0-2,210/0-38,250/bpm.Max. Torque: 169Nm.Capacity: Steel 12.7mm, Masonry 12.7mm, Wood 38mm.Weight: 1.87kg (without battery).
The Bosch GSB 13 RE Impact Drill is fitted with a robust, twin-sleeve keyless 13mm chuck made of metal for fast tool changes. It is extremely handy, no bigger than a glove and light weight at 1.6kg. It has a softgrip handle for a secure, comfortable hold. Fitted with electronic control for exact pilot drilling, speed preselection with setting wheel, and forward/reverse rotation. Specifications: Input Power: 240V 550W, 110V: 600W.No Load Speed: 0-2,800/min.Impact Rate: 0-44,800/bpm.Torque: 10.8Nm.Chuck: 13mm.Capacity: Concrete: 13mm, Wood: 25mm, Steel: 10mm, Masonry: 15mm.Weight: 1.5kg.Bosch GSB 13 RE 13mm Keyless Chuck Impact Drill 550 Watt 240 Volt Version.
The Einhell TC-WD 200/150 Wet Dry Bench Grinder is ideal for DIY enthusiasts, it can be used for sharpening blades of all kinds, drill bits, scissors or knives. The robust compact metal construction ensures the grinder has a long service life and the large water tank is made of corrosion-resistant material. Large adjustable work supports are helpful for a wide range of applications, while the ball bearing mounted shaft with zero play makes it possible to achieve precise results. For safety there is a spark guard window which can be adjusted without any tools, plus guard hoods which are closed at the sides. Four rubber feet absorb vibrations and ensure a secure and steady standing position in operation. Supplied complete with a coarse grinding/sanding wheel and slow-speed, fine-grained wet grinding/sanding wheel. Specifications: Max. Idle Speed Dry Grinding Disc: 2,980/min.Max. Idle Speed Wet Grinding Disc: 134/min.Wet Grinding Disc Diameter: Inner 20mm, Outer 200mm.Dry Grinding Disc Diameter: Inner 32mm, Outer 150mm.Wet Grinding Disc Grain: 200.Weight: 9.1kg.
The Makita PF0300 Submersible Clean Water Drainage Pump is a powerful and versatile water pump that can be used for draining rain water barrels and casks, garden irrigation, trenches, flood water, cesspits, reservoirs, ponds swimming pools and cellars. This robust pump is only suitable for clean water drainage and permits up to 5mm particle sizes. For your convenience the Pump also has an integrated handle for easy transportation and storage as well as a hose connector. Specification: Input Power: 300WMax. Submersion Depth: 5mMax. Pumping Capacity: 140L/min.Max. Solids Diameter: 5mmMax. Head: 7mMin. Suction Level: 20mmWeight: 4.23kg
The Einhell TE-CN 18 Li-Solo Power X-Change Naileris perfect for your garage or workshop and renovation work. Fixing objects with staples or nails is easy with stapler-nail gun combo. The robust gearbox allows up to 20 impacts/min., while depth adjustment ensures variable impact depth. Working close to edges is possible thanks to the slim stapler nose. The magazine has a level indicator providing an overview of the current load and maximum capacity of 100 nails or clamps, all securely held by a magnet. It can be easily opened and refilled at the push of a button. The pressure mechanism on the stapler nose allows safe working, while large softgrip surfaces offer comfortable and firm hold. Delivery includes practical belt clip for safe storage and 300 nails (32mm) 300 staples (19mm). With the supplied hexagon key, nail/staple jams can be easily and quickly fixed. Release protection prevents unintentional tacking/nailing, preventing injury. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Shots per Minute: 20.Staple Length: 16-22mm.Staple Width: 5.7mm.Nail Length: 32mm.Nail Width: 15mm.Magazine Capacity: 100.Weight: 2.07kg.
The HiKOKI C7 ST Circular Saw has a powerful motor and an adjustable steel base for cutting bevels up to 45°. Its dust blower ensures that the cutting line is easily visible and no riving knife enables easier plunge cutting. External brush caps allow easy maintenance and the spindle lock allows easy blade replacement. Supplied with: 1 x TCT Blade 216 x 30mm x 18T, 1 x Guide, 1 x Wrench & 1 x Carrying Case. Specification: Input Power: 240V: 1,710W, 110V: 1,560WNo Load Speed: 6,000/min. Max. Cutting Depth: @90° 62mm, @45° 47.5mmBlade: 185 x 30mm BoreWeight: 4.3kg1 x HiKOKI C7 ST Circular Saw 185mm 1560W 110V
The HiKOKI CR13V2 Variable Speed Sabre Saw has a newly designed front cover and handle for a better hold and adjustable front shoe, large trigger switch. It boasts a high cutting speed with a heavy-duty motor, quick blade change by lever and reversible blade mount for cutting up or down. Specification: Input Power: 1010WStrokes at No load: 0-280/min.Stroke Length: 29mmCapacity: Pipe 130mm, Mild Steel Pipe 19mm, Wood 300mmWeight: 3.2kg1 x HiKOKI CR13V2 Variable Speed Sabre Saw 240V version.
The Makita DHS680 Brushless Circular Saw boasts high-power cutting with automatic speed control, which changes according to load condition. In light-duty mode: high-speed rotation mode, in heavy-duty mode: high torque mode. It has a compact and lightweight design that has been achieved thanks to a downsized motor, better placement of parts and using durable but light magnesium die-cast for the base, blade case and safety cover. Comes as a Bare Unit, NO Battery or Charger supplied. Specification: No Load Speed: 5,000/min.Cutting Depth: @0º 57mm, @45º 41mm, @50º 37mmBlade: 165 x 20mm boreWeight: 3.3kg
The Makita PF1110 Submersible Dirty Water Drainage Pump is a powerful and versatile water pump that can be used for the drainage of basins with muddy water, wells, tanks and lifting water for irrigation or transfer. This robust dirty water pump permits particles up to 35mm. For your convenience the Pump also has an integrated handle for easy transportation and storage as well as a hose connector. The pump has a durable stainless steel body that provides maintenance free operation. Specification Input Power: 1,100WMax. Submersion Depth: 5mMax. Pumping Capacity: 250L/min.Max. Solids Diameter: 35mmMin. Suction Level: 50mmWeight: 7kg
The Makita DTW450 1/2in Impact Wrench has a compact, lightweight design and a powerful 4 pole motor. Fitted with a forward and reverse rocker switch trigger. The body features rubber joint construction for minimum battery failure. Fitted with an ergonomic soft grip, ideal for prolonged use and less user fatigue. There is also an LED job light with afterglow for working in dark spaces. Comes as a Bare Unit, No Battery or Charger Specification Bit Holder: 1/2in SquareNo Load Speed: 1,600/min.Impact Rate: 2,200/bpmMax. Torque: 440NmWeight: 3.4kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure: 94 dB(A).Noise Sound Power: 105 dB(A).Noise K Factor: 3 dB(A).Vibration: Fastening Bolt: 19 m/sec².Vibration K Factor: 1.5 m/sec².
The Makita DGA452 LXT Angle Grinder has been developed as the first Angle grinder of the MAKSTAR series models. It has an easy grip body that has high comfort grips. Fitted with an anti-restart function with a warning lamp and it is capable of using wheels or discs that are designed for use with mains grinders. The electronic current limiter is also fitted with a warning lamp and a 4-pole motor. Specification No Load Speed: 10,000/min.Wheel Diameter: 115mm Weight: 2.3kgThe Makita DGA452Z LXT Angle Grinder is supplied as a Bare Unit, No Battery or Charger.
Makita DHS783 Brushless Circular Saw with Automatic Torque Drive Technology that automatically changes the cutting speed according to load condition for optimum operation. It produces a high power, similar to an AC tool. For quick, repetitive cuts there is a positive stop at 45° bevel angle. Fitted with a magnesium die-cast base plate for increased precision and durability. Its design also provides improved visibility of the blade tip. For added user safety there is an electric brake and overload warning lamp. There is also a handy LED job light, ideal for working in dark areas. Built-in Auto-Start Wireless System (AWS), this connects to compatible dust extractors with Bluetooth®. The dust extractor automatically runs while the switch is on. Guide rail compatible, without an adaptor. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 6,000/min.Cutting Depth: @0º: 62.5mm, @45º: 44.5mm, @ 48º: 42mm.Blade: 190 x 20/30mm bore.Weight: 4.5kg.
The DEWALT DCV584L FlexVolt XR Vacuum is compatible with 14.4 Volt and 18 Volt XR Li-Ion, as well as 54V FlexVolt battery packs for maximum versatility (runs at 18 Volt Max to increase run time). In addition to this the DCV584L can be operated via mains giving a choice of either corded or cordless use. The DEWALT Airlock adaptor allows the direct attachment of power tools to the dust extractor. An on board tool storage system grants easy access to additional nozzles and accessories whilst a durable tank design with a large storage capacity means less downtime and more work. Fitted with an L-Class approved filter that enables both wet and dry vacuuming without the need to change or remove the filter. Additional features include a blower function and a built in ergonomic top located carrying handle for easy transportation. Bare Unit, No Battery or Charger Supplied. Supplied with 1 x 2 Metre Hose, 1 x Crevice Tool and 1 x Wide Nozzle. Specification Input Power: 300 Watt.Power Source: AC or Li-Ion Battery.Capacity Wet/Dry: 7.5 Litre. Max Air Flow: 954l/min. Hose Nozzle Outside Diameter: 32mm. Size (LxWxH): 430 x 305 x 330mm. Weight: 4.8kg.
The RIDGID CA-150 Micro SeeSnake® Hand Held Inspection Camera can capture up to 20 still images during inspections to playback on screen later. The rugged 17mm aluminium camera head combined with a one-handed pistol grip design makes this tool ideal for the most demanding environments. With 4 super bright LED lights to provide increased illumination for excellent visibility in even the darkest inspection areas. A crisp 3.5in colour LCD screen with 180° digital rotation, provides upright images for better problem analysis without spending time or effort positioning the camera head. Supplied with: 4 x AA Batteries, 1 x RCA Cable, 1 x Mirror, 1 x Magnet & Hook and 1 x Carry Case.
Olympia Tools® Cordless Screwdriver with an easy-to-use pivot handle that changes from a traditional pistol grip handle to a straight handle for use in confined spaces. An automatic spindle lock makes it easy to switch between bits. Fitted with a comfortable soft grip handle and an LED job light. There is also a handy charge level indicator for easier work management. Supplied with: 1 x 3.6V 1.3Ah Li-ion Battery, 1 x Charger and 4 x Screwdriver Bits. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 230/min.Max. Torque: 3NmCharging Time: 3-5 hoursWeight: 0.35kg
Bosch Cordless freedom with the power of a pneumatic tool without compressors, gas cartridges, or cords: gasless 16ga (1.6mm) finish nailer with bump fire mode. You can activate and operate the tool with just one hand thanks to the thumb-actuated power switch, it is gentle on your wrist and lungs thanks to very low recoil and gasless operation. Fires 1.6ga (1.6mm) Nails 32-64mm Low recoil Dry fire Lock-out One handed operation Stepless depth adustment Belt hook.
The Bosch GWS 9-115 S Angle Grinder is fitted with a powerful motor and variable speed selection for increased control when working on different materials. With overload capacity for increased safety. The small grip diameter and ergonomic design make it comfortable and easy to handle. Specifications: Input Power: 900W.No Load Speed: 2,800-11,000/min.Disc Diameter: 115mm.Spindle Thread: M14.Weight: 1.9kg.
This Bosch GSH 5 CE SDS-Max Professional Demolition Hammer built for horizontal chiselling in concrete and stone. Its powerful motor enables the delivery of 8.3 J of impact energy for high material removal rates. Built for durability, featuring robust metal components and an optimised lubrication system. Its Vibration Control and lightweight design enable effortless and continuous work in time-intensive tasks. Additional features include an Automatic Lock-on button, Constant Speed, Speed Selection, and Vario-Lock. Supplied with: 1 x Auxiliary Handle, 1 x Pointed Chisel 400mm, 1 x Grease Tube, 1 x Machine Cloth and 1 x Carrying Case. Specifications: Tool Holder: SDS-Max.Input Power: 1,500W.Impact Rate: 1,300-2,900/bpm.Impact Energy: 8.3 Joules.Weight: 6.2kg.Bosch GSH 5 CE SDS-Max Professional Demolition Hammer 240V Version.
Einhell Power X-Change Plus Slimline Batteries feature the latest generation of lithium-ion cells provides 100% more power for maximum performance in all applications, with a 13% more compact design and 12% weight reduction. PLUS technology also means extra power for intensive work. In addition, the high-quality battery resists the memory effect and the self-discharge which usually occurs in batteries for constant, high power. The process-driven ABS active battery management system continuously monitors the battery settings using the integrated microprocessor. This ensures maximum safety, optimal device performance, maximum runtime and maximum service life. You can check the current charge status via the 3-stage LED indicator. The housing is resistant to dust, corrosion and mechanical influences thanks to its construction. The rubber coating gives the battery high impact protection and a good grip. Thanks to the recessed grip, it can be easily removed from all units. A member of the multifunctional and completely interchangeable Power X-Change rechargeable battery system from Einhell. The Power X-Change rechargeable batteries can be used universally for supplying power and endurance to every cordless tool from the entire garden and workshop product family.1 x Einhell Power X-Change Plus Slimline Battery 18V 4.0Ah Li-ion.
Einhell Power X-Change Plus Slimline Batteries feature the latest generation of lithium-ion cells provides 100% more power for maximum performance in all applications, with a 13% more compact design and 12% weight reduction. PLUS technology also means extra power for intensive work. In addition, the high-quality battery resists the memory effect and the self-discharge which usually occurs in batteries for constant, high power. The process-driven ABS active battery management system continuously monitors the battery settings using the integrated microprocessor. This ensures maximum safety, optimal device performance, maximum runtime and maximum service life. You can check the current charge status via the 3-stage LED indicator. The housing is resistant to dust, corrosion and mechanical influences thanks to its construction. The rubber coating gives the battery high impact protection and a good grip. Thanks to the recessed grip, it can be easily removed from all units. A member of the multifunctional and completely interchangeable Power X-Change rechargeable battery system from Einhell. The Power X-Change rechargeable batteries can be used universally for supplying power and endurance to every cordless tool from the entire garden and workshop product family.1 x Einhell Power X-Change Plus Slimline Battery 18V 3.0Ah Li-ion.
This DEWALT DCD805P2T XR BL G3 Combi is supplied with: 1 x Magnetic Bit Holder. 1 x Belt Hook. 2 x 18V 5.0Ah Li-ion Batteries 1 x Multi-Volt Charger. 1 x TSTAK Carry Case. The DEWALT DCD805 XR Brushless G3 Combi has been engineered to give the greatest performance on the toughest jobsites, the 2 speed and 15 torque settings give the ultimate control over drilling and fastening applications. Its ultra-compact, lightweight design allows use in confined spaces, and fitted with an ergonomic, overmould rubber grip improves the user's comfort. The enhanced pivoting LED positioned on the foot offers greater visibility in dark, and confined spaces. Specifications: Chuck: 13mm. No Load Speed: 0-650/2,000/min. Impact Rate: 34,000/bpm. Max. Torque: 90Nm. Capacity: Steel 13mm, Masonry 13mm, Wood 55mm. 2 x 18V 5.0Ah Li-ion Batteries
The Einhell TE-CI 18 Li Power X-Change Cordless Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. It has a special impact mechanism to eliminate any torsion forces on the user’s wrist, users can therefore effortlessly tighten large and long screws. The short, lightweight design has ergonomic soft grip surfaces and a rugged aluminium housing that has additional rubber supports for increased protection. The driver has precision speed control for fine adjustment on delicate jobs. Other features include: a standard Allen screw mount (it is recommended that you use impact resistant bits), practical belt clip and 3 power LEDs included for good all-round illumination. EINTECI181LI: 1 x 18V 2.0Ah Li-ion BatteryEINTECI18LI: 1 x 18V 1.5Ah Li-ion BatteryEINTECI18LIN: Bare Unit, No Battery or Charger Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,300/min.Impact Rate: 0-3,200/bpmMax. Torque: 140NmWeight: 1.45kgThe Einhell TE-CI 18 LIN Power X Change Impact Driver is a Bare Unit, NO battery or charger supplied.
The Einhell TC-BJ 900 Biscuit Jointer is ideal for ambitious DIY enthusiasts, allows the production of perfect butt joints and cabinet joints for numerous applications. It features an infinitely variable angle and height setting facility. The routing depth can be set to three different levels easily by using the quick-adjust facility. With a large base plate made of solid aluminium, providing perfect stability and exact routing. The spindle lock enables fast cutter change. Supplied with: 1 x Face Spanner, 1 x Dust Bag and 1 x Transport & Storage Case. Specification Input Power: 860WNo Load Speed: 11,000/min.Groove Cutter: 100 x 22 x 3.8mmMax. Cutting Depth 14mm, Fence Adjustment 0°-90°Weight: 3.25kg
The Einhell PXC Power-X Twincharger charges two 18V Li-ion batteries at the same time and can be used universally for all 18V Power X-Change batteries. Intelligent charging management provides maximum safety and optimum charging. Charging cycles are adjusted to the specific situation, so the batteries have a longer service life. The 6-stage charging system provides the user with up-to-the-moment battery status information. Integrated suspension eyelets for easy wall mounting. Specification: Output Voltage: 18VOutput Current: 3A
The HiKOKI P18DSL Planer is ideal for professional carpenters and has a robust design with a high-speed motor that gives a fine finish in all materials. It has a maximum cutting depth of 2mm for quick stock removal. Equipped with a safety brake, when the switch trigger is released, the brake stops the blade rotation automatically. The built-in blade stand prevents damage to blades or worktop, prolonging tool life. Fitted with a soft grip handle for increased user comfort. P18DSL/JJ: 2 x 18V 5.0Ah Li-ion BatteriesP18DSL/W4Z: Bare Unit, No Battery or Charger Specification: No Load Speed: 16,000/min.Cutting Depth: 2mm, Rebate Depth: 19mmPlaner Width: 82mmWeight: 3.3kgThe HiKOKI P18DSL/W4Z Cordless Planer is supplied as a bare unit. Batteries are NOT included.
This HiKOKI UC18YSL3JEZ Starter Pack contains the following: 2 x 18/36V BSL36A18/J0Z Multi-Volt 5.0/2.5Ah Li-ion Batteries. The Multi Volt Battery offers unprecedented power output, similar to mains powered tools when used with a 36V tool*. The battery has a compact, lightweight design and is similar in both size and weight to the existing 18V 5Ah and 6Ah batteries. It also features a 4-stage battery level indicator with a diagnostic function.Compatible with the existing range of Hitachi/Hikoki 18V slide battery tools and the new range of 36V Multi Volt tools. Compatible with existing 18V chargers and the new UC36YSL. *Not compatible with previous non-Multi Volt 36V tools. 1 x 14.4-18V UC18YSL3 Rapid Smart Charger is suitable for slide type Li-ion batteries. It provides the industry's fastest charging time of approx. 32 minutes for 5.0Ah battery and 38 minutes for 6.0Ah battery.Cutting edge 3-way protection technology prevents the battery from overcharging and overheating. It has a large charge indicator lamp with 4-colour LED status lights and a USB port for charging small portable devices.
